Loading ...
Loading ...
Loading ...
EN - 9
EN
Setting water hardness
• The machine is factory set to “Hard Water
Level”. The machine can also be set
according to the actual water hardness
in the various regions for less frequent
descaling.
• If you don’t know the water hardness, use
the test strip supplied (18) and follow the
instructions below.
• Remove the reactive strip supplied from its
packaging.
• Fully submerge the strip in a glass of water
for about one second.
• Remove the strip from the water and shake
it slightly. Read the results after approx.
one minute.
If 5 blue stripes appear on the strip, select
the “soft water” setting.
If 1 or 2 pink stripes appear on the strip,
select the “average water” setting.
If 3, 4 or 5 pink stripes appear on the strip,
select the “hard water” setting.
• Access the programming menu.
• Press the key (21) to set water hardness.
• The key (21) ashes 3 times, after which
the current setting LEDs turn on:
LEDs Setting water
Soft
Medium
Hard
• The LEDs start to ash in sequence.
• Press the key corresponding to water
hardness:
Soft
Medium
Hard
<10°dH
10°dH - 20°dH
>20°dH
<18°fH 18°fH - 36°fH >36°fH
<180 mg/l
CaCo3
180-300 mg/l
CaCo3
360 mg/l
CaCo3
• The key selected ashes to indicate the
selection has been stored and a single
sound is emitted if the acoustic signals are
activated.
To prolong machine operation and
preserve the aroma and avour of
the coffee, use of the Smeg Water
Softener Filter is recommended
(optional, not supplied). For
installation and operation, follow
the instructions accompanying the
accessory. Once installed, set the
level of water hardness at "Soft",
following the indications in the
previous paragraph.
Setting the automatic shut-off time
In order to save energy, the coffee machine
has an automatic shut-off function and will turn
itself off when it has not been used for a certain
period of time.
To turn the appliance back on, press any button
on the control panel.
To set the automatic shut-off time:
• Access the programming menu (see section
“3.6 Access programming menu and
change settings”).
Press the key (22) to set the automatic shut-off
time.
Use
Loading ...
Loading ...
Loading ...