Loading ...
Loading ...
Loading ...
EN - 6
Use
When the machine has not been
used for a while (more than 30
minutes), it is normal for the rst
cups of coffee not to be at the right
temperature. Repeat the procedure
described to obtain a hotter coffee.
Ground coffee (Fig. B-C-E-G)
• Insert the 1-cup (14) or 2-cup ground coffee
lter (15) into the lter holder (3).
• Fill the lter (14) or (15) with ground coffee,
making sure nely ground coffee is used,
which is suitable for the espresso.
• Distribute the ground coffee evenly and
tamp down using the tamping scoop (12).
• Remove any excess ground coffee from the
edge of the lter holder (3). Attach the lter
holder to the dispensing unit (2) and turn it
to the right until it locks in place.
• For one cup, ll the relevant
lter (14) with a level measure
of coffee (approx. 7 grams.)
• For two cups, ll the lter (15)
with two level measures.
• To obtain a strong coffee, tamp
down the coffee rmly.
• To obtain a weak coffee, tamp
down the coffee less.
• Before introducing the filter-
holder into the dispensing unit,
make sure the edge of the lter
is cleaned to remove any coffee
residues.
• Position the cup or cups under the lter
holder nozzles.
• Press the key relative to the desired function.
Preparation ends automatically for every
function selected.
• For the specic beverages, refer to section
“2.2 Description of controls”.
• Once dispensing has ended, wait a few
seconds and then remove the lter-holder
(3) by turning it to the left.
Coffee pods (Fig. B-C-F-G)
• Insert the coffee pod lter (13) into the lter
holder (3).
• Insert the pod into the lter holder (3),
centring it as much as possible. Attach the
lter holder (3) to the dispensing unit (2).
• Position the cup or cups under the lter
holder nozzles (3) and press the dispensing
key (20).
• Once the coffee has been dispensed, turn
the lter holder (3) to the left to remove it.
Before dispensing, make sure that
the pod ap remains inside the
lter, and not on the edge.
• Dispensing can be stopped
at any time by pressing the
dispensing key again.
After having waited a few
seconds following the end of
every dispensing operation, it is
advised to release the lter-holder
and clean the coffee residues from
the lter.
Setting the quantity of coffee
The quantity of coffee dispensed can be
customised for every function.
To modify the quantity of coffee dispensed by
the machine:
• Position a small or large cup under the
dispenser (2).
• Press one of the keys relevant to the
beverage to be dispensed (20) or (21)
for at least 3 seconds, until the LED of the
relative button remains on.
• On reaching the desired quantity, stop
dispensing by pressing the key again.
Loading ...
Loading ...
Loading ...