Loading ...
Loading ...
Loading ...
4
Note
●
The load-bearing capacity of the wall should be three times more
than the weight of the device.
●
Ensure that the distance between the two screws equals to the
distance between the two hanging holes.
●
Set aside at least 4 mm of the screw bodies outside the wall.
3. Align the hanging holes with the screws, and hang the device on
the screws.
Wall Mounting
2.3 Rack Mounting
Steps
1. Check the grounding and stability of the rack.
2. Use M3 screws provided in the package to fix the two L-shaped
brackets to both sides of the device.
Fix L-Shaped Brackets to the Device
3. Fix two self-prepared M5 or M6 nuts to the rear side of the rack
on both sides respectively.
Fix Nuts to the Rack
4. Place the switch against the rack so that the holes on the L-
shaped brackets are aligned with the holes where the nuts have
been fixed.
5. Fix the brackets to the front side of the rack with two self-
prepared M5 or M6 screws on both sides respectively to stably
install your device.
Loading ...
Loading ...