Loading ...
2
To prevent possible SERIOUS INJURY or DEATH, follow instructions to
select and set door profile for safe and proper operation.
4-6 inch
diameter
8 inch
diameter
8 inch
diameter
To prevent possible SERIOUS INJURY or DEATH, after ANY changes to
the door profile, reprogram limits.
Adjustment
Identify Door Profile
To identify the door profile number, measure the full drum diameter based
on the images below.
NOTE: This step is important to ensure the proper operation of the unit.
To view a video demonstration of how to identify and set the door profile,
scan the QR code.
Standard Lift Sectional Door
• Door Profile 1 = Standard to Heavy Weight Door* with a 4” drum
(Recommended).
• Door Profile 2 = Light Weight Door with a 4” drum.
• Door Profile 3 = Heavy Weight Door* with a 6” drum.
• Door Profile 4 = Light Weight Door with a 6” drum.
*
NOTE: Drum sizes may vary by manufacturer.
For Standard Lift Sectional Doors:
•Drums less than or equal to 5”, use 4” drum.
•Drums more than 5”, use 6” drum.
Standard to Heavy Weight doors are those with solid wood interiors, wood
veneer exteriors, glass windows, insulation, and/or decorations.
High Lift Door
• Door Profile 5 = Tapered drum with tracks that raise to a higher elevation
Vertical Lift Sectional Door
• Door Profile 5 = Tapered Drum with tracks raising vertically above the
opening.
Set Door Profile
1. To enter Set Door Profile mode, press and hold the black button for
one second. The UP and DOWN buttons turn a solid color.
2. To set Door Profile, press the UP and DOWN buttons. The Learn LED
button blinks and beeps as you change the setting.
3. The number of Learn LED button blinks indicates which profile you
have selected. There is no preset door profile setting.
4. Press and release the Black button to set the Door Profile. This process
is now complete. Proceed to the Travel Learn mode.
EXITING DOOR PROFILE NUMBER SETTING
If there is no selection within 4.5 minutes, the Door Profile selection mode
will be cancelled with a long beep.
Loading ...
Loading ...
Loading ...