Loading ...
Loading ...
Loading ...
Note
If you turn o Auto Add Network Camera, when an inacve network camera or third party
ONVIF camera is connected to your network, the video recorder would automacally detect it
and nofy you to add it.
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Steps
1. Go to Conguraon → Camera → Camera → IP Channel .
2. Click of an added network camera.
Channel Port
If the connected device is an encoding device with mulple channels, you can choose the
channel to connect by selecng the channel port No. in the drop-down list.
3. Click OK.
Upgrade Network Camera
The Network camera can be remotely upgraded through the device.
Before You Start
●
Ensure you have inserted the USB ash drive to the device, and it contains the network camera
upgrade rmware.
●
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connecon is valid and correct.
Steps
1. Go to Conguraon → Camera → Camera .
2. Click .
3. Click Yes to conrm.
4. Select the camera upgrade rmware from your storage device.
5. Click Upgrade to start upgrading. The camera will restarted automacally aer upgrade
completed.
Add Network Camera Through PoE
The PoE interfaces enable the device to transfer electrical power and data to connected PoE
cameras. And the PoE interface supports the Plug-and-Play funcon. Connectable PoE camera
number varies with device models. If you disable a PoE interface, you can also use it to connect to
an online network camera.
Network Video Recorder User Manual
46
Loading ...
Loading ...
Loading ...