Loading ...
Loading ...
Loading ...
en-us Before using for the first time
18
Level Water hardness in gr/
gal (US)
1 1.0426 - 7.2985
2 8.3412 - 14.597
3 15.64 - 21.896
4
1
22.938 - 31.279
1
Factory setting
Note:Please use the test strip even if
you have a water softening system
installed as they generate different
water hardnesses.
Tips
¡ You can change the settings at any
time.
→
"Basic settings", Page25
¡ If the water hardness is higher than
21.896gr/gal (US), you can fill the
water tank with prefiltered water to
reduce limescale deposits in the
water tank.
6.3 Water filter
You can use a water filter to minimize
limescale deposits and reduce
impurities in the water.
Insert water filter
NOTICE:
Possible damage to the appliance due
to limescale build-up.
▶ Change the water filter at the
correct time.
▶ Change the water filter after
2months at the latest.
▶ Observe the display messages.
1. Press
.
2. Select "INTENZA filter" and follow
the instructions on the display.
Changing or removing the water
filter
You can also operate your appliance
without a water filter.
1. Press
.
2. Select "INTENZA filter".
3. Select "Replace" or "Remove" and
follow the instructions on the
display.
Tips
¡ You should also change your water
filter for sanitation reasons.
¡ With a water filter you need to
descale your appliance less
frequently.
¡ If you use a water filter, your coffee
will be more flavorful.
¡ If your appliance has not been used
for a long time, for example if you
were on vacation, you should rinse
the water filter before use by
dispensing a cup of hot water.
¡ The water filter can be purchased
from retailers or customer service.
→
"Accessories", Page12
6.4 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for initial start-up. Initial start-up only
appears when switching on for the first
time.
1. Press
to switch the appliance on.
2. Follow the instructions on the
display.
a The display will guide you through
the cycle.
Loading ...
Loading ...
Loading ...