Loading ...
Loading ...
Loading ...
ENGLISH
18
Irregular
Flame Pattern
Obstructed
Burner Tube,
Burner Ports
Check burner tube and burner ports for spider webs
or other obstructions. Follow
Care and Maintenance
instructions to clean the burner tube.
Burner
Flames Are
Yellow Or
Orange
Poor Air Flow Check burner tube and burner ports for spider webs
or other obstructions. Follow
Care and Maintenance
instructions to clean the burner tube.
Obstructed
Burner Tube,
Burner Ports
Check burner tube and burner ports for spider webs
or other obstructions. Follow
Care and Maintenance
instructions to clean the burner tube.
Grease Tray Is
Full, Spilling
Onto Ground
Empty grease tray and re-install. Follow
Care and
Maintenance
instructions.
Regulator Valve
Is Off
Check the regulator valve connection to the gas cylinder.
Remove, then reinstall. Perform leak test.
Burner Is Dirty Turn regulator knob to HIGH for five minutes, and burn-off
the unit. Follow
Care and Maintenance
instructions.
Grease Fire
/ Frequent
Flare-Ups
Cooking
Temperature
Attempt cooking at a lower temperature. Grease does have
a flash point. Keep the temperature under 176°C / 350°F
when cooking highly greasy food.
Grease Build-Up
On Burner
Components
Follow
Care and Maintenance
instructions.
Spiders &
Flashback
Fires
Obstructed
Burner Tube,
Burner Ports
Check burner tube and burner ports for spider webs
or other obstructions. Follow
Care and Maintenance
instructions to clean the burner tube.
Gas Leakage Improper
Installation
Turn the regulator knob to the OFF position, and allow the
regulator knob to pop out. Remove the gas cylinder. Re-
install and tighten. Perform leak test to ensure proper seal.
Replace gas cylinder if damaged.
Seal Failure Gas cylinder has corroded, rusted, or has been mishandled.
Replace gas cylinder.
Regulator
Failure
Regulator needs to be replaced. Contact Customer Service
for a replacement part.
Loading ...
Loading ...
Loading ...