Loading ...
Loading ...
Loading ...
13
FIGURE 15
PREPARING YOUR SAW FOR USE
USING THE LASER GUIDE
TO REMOVE YOUR MARK:
TO CUT ON YOUR MARK:
TO CUT WITHOUT REMOVING YOUR MARK:
FREE WARNING LABEL REPLACEMENT
APPLICATIONS
Refer to Figure 15.
When the laser guide switch is turned on it projects a red
line onto the work surface enabling you to see your cut
before you make it. To ensure a true and straight cut:
1. Make sure the saw is unplugged.
2. Draw a line on the workpiece where you plan to cut.
3. Flip the laser switch (A) on the “ON” position.
4. The red line (B) indicates the path of the blade.
5. Align the laser line and the mark with the blade at the
uppermost position.
6. Once both lines are in alignment, do not move the
workpiece.
7. Plug the saw into the power source.
8. Make several practice cuts on different styles and
thickness of material.
9. Repeat the steps above is necessary.
Position the laser line near the left edge of your mark on
the work surface in order to cut the mark.
Position the laser line near or over your mark on the work
surface in order to cut the mark.
Position the laser line near the right edge of your mark on
the work surface in order to leave the mark,
After you have become familiar with using the laser
guide, you will be able to remove, cut, or leave your mark
on the work surface. Practice will teach you the correct
position for aligning the laser line with your mark.
If your warning labels become illegible or are missing,
user shall remake the label according to copy on manual
and attach on the same location or call 1-800-223-7278
for a free replacement.
During operation and maintenance, human access to
laser radiation in excess of the accessible emission limit
is possible, so it should avoid direct eye exposure of laser
radiation.
B
A
Metal instruments can cause a laser reflector. During
operation and maintenance should avoid direct exposure
in these instruments, as far as possible not to use
reflective instruments. Action should be avoided with
watches, necklaces, bracelets, it can be reflected laser
accessories.
Complies with 21 CFR 1040.10 and 1040.11 Use of
controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
EXAMPLE SERIAL NUMBER, FOR
REFERENCE ONLY
14AB000001211401CT
Loading ...
Loading ...
Loading ...