Loading ...
Loading ...
Loading ...
7.
Click Save to save the rule conguraon.
8.
Set arming schedule. See Set Arming Schedule .
9.
Set linkage method. See Linkage Method Sengs .
10.
Oponal: Set data opmizaon parameters. Click Save aer seng the parameters.
Height Filtering
Enable the funcon and set a height value. Persons and objects whose height is below the
set value will not be counted as a valid target.
Children Data Upload
Enable the funcon and set a height value. Persons and objects whose height is higher than
this set value will not be counted as children.
11.
Oponal: Set people counng data uploading parameters. Refer to Data Uploading for details.
12.
Oponal: Set reverse counng alarm.
1) Click Reverse Counng Alarm to enter the interface. Check Enable Reverse Entering Alarm
to enable the funcon.
2) Set the arming schedule and linkage method.
3) Click Save.
When the detecon target leaves the detecon area in the direcon opposite to the detecon
direcon, an alarm will be triggered.
13.
Oponal: Set overlay and capture parameters. Refer to Overlay and Capture for details.
14.
Oponal: Set people counng advanced parameters for detecon accuracy improvement and
maintenance. Refer to Advanced Sengs for details.
15.
Oponal: Set shield region.
The shield region allows you to set the specic region in which the set smart funcon rule is
invalid.
1) Select Shield Region.
2) Click
to draw shield region. Repeat this step above to set more shield regions.
3) Select and click on the drawn region, then click to delete the selected drawn region.
4) Click to delete all drawn regions.
5) Click Save.
What to do next
Go to Applicaon Display to view detailed people counng data analysis. For detailed sengs,
refer to View People Counng Data .
Auto Calibraon
Camera automacally calculates the installaon parameters and complete calibraon.
Steps
1.
Select calibraon mode as Auto.
2.
Drag the calibraon area (the green rectangle in image) to cover a level area of the ground.
Network Camera User Manual
75
Loading ...
Loading ...
Loading ...