Loading ...
Loading ...
Loading ...
9
3. Locate the left upper side panel (I) and right upper
side panel (J) and center shelf (H), and set out face
down on a scratch-free surface.
Insert one wood dowel (CC) into each of the
pre-drilled holes.
Place center shelf (H), left upper side panel (I) and
right upper side panel (J) on the top of the assembly
from step 2 as shown in diagram.
Make sure the wood dowels (CC) are seated into the
pre-drilled holes. Secure bolt (AA) and washer (BB)
through pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
BB
BB
FFEE
BB
AA
AA
AA
CC
CC
4. Locate mantel/top (G) and lay îš¿nished side up on
top of completed assembly. From the inside, attach
the mantel/top (G) using bolt (AA) and washer (BB)
through the pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Using Phillips screwdriver (not included), tighten all
bolts (AA). Alternate top and bottom and left and
right.
Hardware Used
BB
AA
CC
Bolt x 14
Washer x 14
Wood Dowel
x 12
I
H
G
K
M
L
J
5. Locate left back panel (K), right back panel (L)
and center back panel (M), and attach to the back
of the completed assembly from step 4. Using a
Phillips screwdriver, tighten screws (EE) through
the pre-drilled holes in the back panels to the
completed assembly.
Hardware Used
EE
Screw x 54
Hardware Used
BB
AA
Bolt x 4
Washer x 4
3
4
5
Loading ...
Loading ...
Loading ...