Loading ...
Loading ...
Loading ...
8
1. Locate the center left side panel (B), center right
side panel (C), center front panel (D), and set out
face down on a scratch-free surface.
Insert one wood dowel (CC) into each of the
pre-drilled holes.
Push the center left side panel (B) and center right
side panel (C) snug to the center front panel (D).
Make sure the wood dowels (CC) are seated in the
pre-drilled holes. Connect the center left side panel
(B) and center right side panel (C) to center front
panel (D) by tightening screws (EE) into pre-drilled
holes corresponding with connection plate on center
front panel (D).
HAND TIGHTEN ONLY.
ASSEMBLY INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts
with package contents list and diagram above. If any part is missing or damaged, do not
attempt to assemble, install or operate the product. Contact customer service for
replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors
and utility knife
Hardware Used
CC
EE
Screw x 2
Wood Dowel x 4
Connection
Plate
CC
CC
EE
C
F
E
A
B
D
CC
CC
2. Attach the completed front assembly from step 1 to
the hearth/base (A). Make sure the wood dowels
(CC) are seated into the pre-drilled holes in the
hearth/base (A). Using bolt (AA) and washer (BB)
attach panels through pre-drilled holes in the
mounting blocks. Hand tighten only.
Locate left side panel (E) and right side panel (F),
and insert one wood dowel (CC) into each of the
pre-drilled holes on the bottom edge of the panels.
Then use bolt (AA) and washer (BB) through the
pre-drilled holes in the mounting blocks to attach the
left side panel (E) and right side panel (F) to hearth/
base (A).
HAND TIGHTEN ONLY.
Hardware Used
BB
AA
CC
Bolt x 8
Washer x 8
Wood Dowel
x 8
BB
AA
1
2
Loading ...
Loading ...
Loading ...