Loading ...
Loading ...
Loading ...
10
6. Locate right front door (O) and left front door (N).
Slide door hinge keyhole into panel hinge bracket
as shown in inset 1 of Fig. 6. Use Phillips
screwdriver to tighten screws as shown in inset 2
of Fig. 6.
TO ADJUST HINGES
To adjust door forward or backward, change keyhole
slot.
To adjust door right or left, loosen/tighten screw as
shown in inset 3b of Fig. 6.
To adjust door up or down, adjust bracket height as
shown in inset 3c of Fig. 6.
Attach the door pull (FF) to the left front door (N) and
right front door (O), securing with the preassembled
bolts. Then use a Phillips screwdriver to tighten the
bolts.
a
b
c
FF
N
O
DD
P
Hardware Used
Door pull
x 2
FF
DD
Shelf Pin
x 16
Hardware Used
7. Choose desired height of wood shelf (P) and place
the four shelf pins (DD) into shelf holes inside side
panels. Insert wood shelf (P), allowing wood shelf
(P) to rest on the shelf pins (DD). Repeat as desired
for remaining wood shelves (P).
8. Please read all “electric re place insert” instrutions
prior to installing electric insert (Q) into the
completed replace mantel.
Install insert (Q) into the replace close to
its nal position.
Lift insert (Q) carefully into the back of the unit and
center in the opening.
Do not drag insert (Q) across hearth/base (A) as it
may scratch the unit.
Note: Move the completed unit only short distances
and with great care. It takes two people to move
completed unit into its nal position.
Completed
Unit
Electric
Fireplace Insert
Install
Insert
From
Back
1 2 3
6
7
8
Loading ...
Loading ...
Loading ...