Loading ...
Loading ...
Loading ...
Steps
1.
Go to Conî´ªguration > VCA > Camera 01/Camera 02 > Basic Settings > Polling Plan .
2.
Select a polling mode.
Auto The device automatically activates the optical channel for perimeter
protection in daytime and the thermal channel at night.
Manual You can manually set the working shifts for the channels.
a. Select the Polling Mode as Manual.
b. Select Optical Channel or Thermal Channel for the drop-down list.
c. Drag to draw time bars on the schedule. Click on the drawn bar to adjust
the time and the channel.
Note
The schedule for the channels cannot overlap.
3.
Click Save.
6.4 Advanced Conî´ªguration
Go to
Conî´ªguration > VCA > Advanced Conî´ªguration and conî´ªgure the parameters.
Detection Parameters
Single Alarm
The system only sends alarm once for one target triggering. Otherwise, the alarm will be
triggered continuously until the target disappears.
Tracking Parameters
Post-tracking
Set the duration of automatic tracking of the target after it stops. E.g., set post-tracking
duration to 10s, the camera tracks the target until that it stop and has been still for over
10s.
Back to Scene Time
Set the duration of the camera moving back to original scene after perimeter protection
is started.
Restore Parameters
Restore Default
Click Restore to restore the parameters to the default.
Restart VCA
Click Restart to restart the VCA function.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
35
Loading ...
Loading ...
Loading ...