Loading ...
Loading ...
Loading ...
Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
112
9.4.2 Configuring Temperature Measurement Rule
Before you start:
The temperature measurement function is usually used together with alarm function.
You can set the alarm linkage so that any alarm/pre-alarms can trigger the connected
alarm. You can double click current screen to show full of it, and double click again to
exit full screen.
Purpose:
This function is used for measuring the temperature of detected spot and the device
compares temperature of selected regions and alarms.
Steps:
(For Normal Mode)
1. Enter Configuration > Temperature Measurement > Advanced Settings.
2. Select the configuration mode as Normal.
3. Configure the parameters.
Emissivity: Set the emissivity of your target. Note: The emissivity of each
object is different.
Distance (m): The straight-line distance between the target and the device.
Pre-Alarm: When the temperature of target exceeds the Pre-Alarm Threshold,
and this status keeps NOT shorter than the Filtering Time, it triggers the
Pre-Alarm.
Check the checkbox of Pre-Alarm Output to set link the pre-alarm with the
connected alarm device.
Alarm: When the temperature of target exceeds the Alarm Threshold, and
this status keeps NOT shorter than the Filtering Time, it triggers the Alarm.
Check the checkbox of Alarm Output to set link the pre-alarm with the
connected alarm device.
4. Click Save.
Loading ...
Loading ...
Loading ...