Loading ...
of protection against electric shock when the COM probe
test lead (black) is installed into the back case.
• The battery door must be closed and locked before you
operate the Product.
• Do not use the Product if it is damaged.
• Disable the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• Do not use test leads if they are damaged. Examine the
test leads for damaged insulation or exposed metal.
Check test lead continuity.
• Limit operation to the specified measurement category,
voltage, or amperage ratings.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
• Use the correct terminals, function, and range for
measurements.
• Do not apply more than the rated voltage, between the
terminals or between each terminal and earth ground.
• Do not exceed the Measurement Category (CAT) rating of
the lowest rated individual component of a Product,
probe, or accessory.
• Keep fingers behind the finger guards on the probes.
• Hold the Product behind the tactile barrier. See the Quick
Reference Guide for this Product.
• T6-600/T6-1000: To use the FieldSense Ground Contact,
make sure the – test probe (BLACK) is stowed in the
storage location in the back case before a FieldSense
measurement. See the Quick Reference Guide for this
Product.
• Disconnect power and discharge all high-voltage
capacitors before you measure resistance or continuity.
• Replace the batteries when the low battery indicator
shows to prevent incorrect measurements.
• Do not operate the Product with covers removed or the
case open. Hazardous voltage exposure is possible.
• Have an approved technician repair the Product.
• Use only specified replacement parts.
For safe operation and maintenance of the Product:
• Remove batteries to prevent battery leakage and damage
to the Product if it is not used for an extended period.
• Repair the Product before use if the battery leaks.
• Be sure that the battery polarity is correct to prevent
battery leakage.
• Clean the case with a damp cloth and detergent. Do not
use abrasives or solvents.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...