Loading ...
Loading ...
Loading ...
60
1. Attach the wall box to the wall and use a marker to mark the location for the center socket
and the screws. Make sure the knob points down.
Screw Location
This knob points down
Figure 1-81
2. Drill 3 holes according to the screw location. Then, drill a bigger hole at the center socket
location for the Ethernet cable.
3. Insert 3 screw anchors to the screw location and secure the wall box to the wall with 3
long screws.
4. Thread the Ethernet cable through the center socket, connect other wires and fit the
camera cable into the wall box. See 1.6 Waterproofing the Cable.
Figure 1-82
5. Unscrew the transparent dome cover with the supplied torx wrench.
Loading ...
Loading ...
Loading ...