Loading ...
Loading ...
Loading ...
Administrator Mode
105
3
4. You can use the following functions to reduce false alarm.
Sensitivity: Move the slider to the right increases detection sensitivity.
Object Size: When the extent of motion within the detection area exceeds the set
object size, motion detection alarm is triggered.
[Alarm Parameters]
Suppress alarm: After an alarm is triggered, the same alarm will not be reported within
the set time.
Clear alarm: After an alarm is triggered,
If the same alarm is not triggered within the set time, the alarm will be cleared and
the same alarm can be reported again.
If the same alarm is triggered within the set time, the alarm will not be cleared until
the suppress alarm time expires. Then the same alarm can be reported again.
[Trigger Action]
Upload to FTP: Select to automatically upload snapshots to the specified FTP server
upon motion detection.
Recording: (only for GV-EBD2702 / 4711 / 8711, GV-AVD2700 / 4710 / 8710,
GV-ABL2702 / 4712 / 8712) Select to automatically start recording videos to the
camera’s local storage upon motion detection. Recording is selected on default.
Trigger E-mail: Select to automatically send snapshots to the specified e-mail
address(s) upon motion detection.
Note:
1. For the Upload to FTP function, make sure to configure the settings in 3.6.2 FTP and
3.3.2 Snapshot first.
2. For the Trigger E-mail function, make sure to configure the settings in 3.2.5 E-mail and
3.3.2 Snapshot first.
Loading ...
Loading ...
Loading ...