Loading ...
Loading ...
Loading ...
38
5. Drill 4 holes according to the marks and insert 4 screw anchors to the 4 holes.
6. Secure the power box to the wall with 4 long screws.
7. Thread the camera cable through the box cover.
8. Secure the camera to the box cover with 4 short screws.
Figure 1-56
9. Thread the Ethernet cable through the PG21 conduit connector and the power box as
shown in No 9, Figure 1-57.
10. Rotate the plastic ring to secure the conduit connector to the power box. Secure in the
cap as shown in No 10, Figure 1-57
11. Plug the Ethernet cable to the RJ-45 connector of the camera.
12. Connect other wires to the camera.
13. Secure the box cover to the power box as shown in No 13, Figure 1-57
Figure 1-57
Loading ...
Loading ...
Loading ...