Loading ...
Loading ...
Loading ...
If you intend to use the fast method in
to search for channels, select . The TV will
use 1 of the prede�ned network frequencies (or HC -
homing channel) as used by most cable providers in your
country.
If you received a speci�c network frequency value to
search for channels, select .
With the set to , you
can enter the network frequency value received from
your cable provider here. To enter the value, use the
number keys.
Enter the network ID supplied by your cable provider.
If your cable provider did not give you a speci�c
value to install the TV channels, leave the
setting on .
If you received a speci�c symbol rate value,
select .
With the set to , you can
enter the symbol rate value by using the number keys.
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select
. If you did not subscribe to pay TV channels or
services, you can select .
> > >
>
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Once a day, at 6 AM, the TV updates the channels and
stores new channels. New channels are stored in the All
channels list but also in the New channels list. Empty
channels are removed.
If new channels are found or if channels are updated or
removed, a message is shown at TV start up. The TV must
be in standby to automatically update channels.
> > >
>
When new channels are found or if channels are
updated or removed, a message is shown at TV start up.
To avoid this message to appear after every channel
update, you can switch it off.
> > >
>
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna. To
check the signal quality of this frequency again,
select and press .
To enter a speci�c digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with and and change the number with and . To
check the frequency, select and press .
> > >
>
Analogue TV channels can be manually installed, channel
by channel.
•
To set up the TV system, select .
Select your country or the part of the world where you
are now and press .
•
To �nd a channel, select and press .
You can enter a frequency yourself to �nd a channel or
let the TV search for a channel. Press ,
select and press to search for a channel
automatically. The found channel is shown on screen and
if the reception is poor, press again. If you want
to store the channel, select and press .
•
To �ne tune a channel, select and press .
You can �ne tune the channel with or .
If you want to store the channel found, select and
press .
•
You can store the channel on the current channel
number or as a new channel number.
Select and press . The new channel number is
shown brie�y.
You can redo these steps until you have found all
available analogue TV channels.
19
Loading ...
Loading ...
Loading ...