Loading ...
Loading ...
Loading ...
Thermal Imagers
SmartView Software
35
Download SmartView Software
1. On the website, follow the instructions to download the software to the PC.
2. On the PC, follow the instructions to install SmartView software. (Administrator privileges are
required for the installation.)
3. Restart the PC when installation is complete.
Download Firmware
1. On the PC, open SmartView software.
2. Connect the USB A connector end of the cable into your PC and the USB Micro B connector end
into the Imager.
Note
Some Imagers have both A and Micro B connector jacks. Make sure to use the Micro B jack on
the Imager.
Windows automatically installs the device driver for use with the Imager. SmartView software
recognizes the connection with the Imager and appears on the SmartView software toolbar
menu.
3. On the PC, select Yes if prompted to download a firmware update file onto the PC.
4. On the Imager, once the firmware is downloaded, select Update Firmware, to update the firmware
in the Imager.
To complete the firmware update, the Imager turns off.
5. To use the new firmware, turn on the Imager.
Enable the Radio
In countries with laws and regulations that permit wireless communications, wireless communication
protocols are available to expand the capabilities of the Imager. All Imagers ship from the factory with
the radios disabled.
To enable the radio:
1. On the Imager, select Camera > Fluke Connect.
3. On the website:
a. Select a language from the drop down box.
b. Enter your information and the serial number from the display on the Imager. The serial number
is case sensitive.
c. Click on Submit.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...