Loading ...
Loading ...
Loading ...
Thermal Imagers
Menus
23
3. Touch Record Video to set up the Imager to record a video.
p shows in the upper left corner of the display.
4. Pull and release the Primary Trigger to start recording.
r shows in the upper left corner of the display. The elapsed time shows at the bottom of the
display.
5. Pull and release the Primary Trigger to stop recording.
6. Push
to end the recording session.
7. Push
to save the video file.
View Video
To play a video:
1. Open the Memory menu.
2. Select a file to play. All video files show k in the upper right corner of the thumbnail.
3. Push
to set a file.
4. Push
to start the video. While the video plays, push or to fast forward or rewind.
Push
to return to normal speed.
5. Push
to exit the video mode.
Wireless Connectivity
The Imager has several wireless connectivity options.
Note
Before the first use of the wireless feature, enable the radio. See Enable the Radio.
Bluetooth
Use Bluetooth to connect the Imager to a device such as a wireless headset. When Bluetooth is on,
shows in the upper left corner of the display.
To use Bluetooth:
1. Select Camera > Wireless > Bluetooth > On.
2. Push Select to scan for available Bluetooth devices within the range of the camera.
3. Select a device.
4. Push
to connect to or disconnect from the device.
5. If you are prompted, enter a password.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...