Loading ...
Loading ...
Loading ...
Ti200, Ti300, Ti400, Ti450, Ti450SF6, Ti480
Users Manual
26
3. On the Fluke Connect app, select Thermal Imager from the list.
You can now take images on the Imager, and they will stream live from the Imager to your mobile
device. Live streaming may not be available on all devices. The pictures you take with the Imager are
saved on your mobile device and on the Imager.
Note
To save images to the Fluke Connect app, set the file format to .is2 (see File Format) and the
image storage to internal memory (see Table 13). Images stored on the SD card or USB storage
device may not transfer to the Fluke Connect app.
4. On the Imager, capture an image.
The image is now in the buffer.
5. Push
to save the image and view the image on the phone app.
Fluke Connect Tools
Use the Imager to wirelessly connect to Fluke-Connect-supported tools to:
• View the live measurement of each tool.
• Capture the measurement of each tool in .is2 and .is3 images.
To discover a Fluke Connect-supported tool:
1. Turn on each wireless tool and make sure the wireless feature is enabled. See the documentation
of each tool for more information about how to use the tool.
2. Turn on the Imager.
3. Select Menu > Fluke Connect > Pair to Fluke Connect Tools.
4. Push
to set selection.
The Fluke Connect button on the wireless tool starts to flash. The Imager starts to scan and
presents a list with the ID and name of available tools found within 20 m without obstructions (open
air) or within 6.5 m with obstructions (sheetrock wall). You can expect a short delay before the scan
is complete.
5. Select the tool name.
6. Push
or touch Select to select the tool.
7. Repeat to select each tool.
8. Select Done.
The labels change to include an Edit function. By default, the Imager shows and saves the data for
the selected tools.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...