Worksafe 9202 Premium Goggles - Indirect Vent

Product's Documents

Below are documents related to this product, you can read online or download:
9202 photo

Instructions

This is the main product document for model 9202.

The file format is pdf, 1 pages, you can download this manual here .

background
PREMIUM INDIRECT VENTED GOGGLES
MODEL NO: 9202.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
1. INTRODUCTION
BS EN 166/1B - Designed with a wide-angle curved lens to enhance visibility. Adjustable headband and soft PVC frame provide added
comfort. Indirect ventilation in goggle frame. Conforms to CE standards.
Notied Body Number: 1023
INSTITUTE FOR TESTING AND CERTIFICATION, INC.
Trida Tomase Bati 299, Louky, 763 02 Zlin, Czech Republic
2. SAFETY
9 This product is designed for face and eye protection against high speed particles of low energy impact. The visor is designed to be
lightweight and comfortable to wear.
9 The product protects against high speed particles worn over standard ophthalmic spectacles, but may transmit impacts, thus creating a
hazard to the wearer.
9 Avoid liquids as small particles can splash into the eyes.
9 Inspect the goggles frequently as a pitted or scratched face shield reduces vision and should be replaced immediately.
8 DO NOT use if any part of the goggles is cracked or broken.
8 DO NOT place this product on a hot surface.
8 DO NOT use these goggles for protection against short circuit electric spark, ne dust, gas, ultra violet or infra red radiation, ionising
radiation, liquids under pressure or other severe hazards.
8 DO NOT use these against heavy impact hazards.
8 DO NOT use these goggles for welding.
IMPORTANT: It is imperative that the goggles t well and comfortably for the user or else slippage and discomfort may arise.
Adjust the headband by pulling/loosening the headband through the buckle.
3. MAINTENANCE
3.1. CLEANING
9 Use a soft cloth and mild soap to clean. Ensure hands are clean (without grease).
8 DO NOT use abrasive materials.
NOTE: Materials which may come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals. The
contact areas should be disinfected regularly.
3.2. STORAGE
9 Store in a bag or case out of direct sunlight.
9 Keep the product away from chemicals and abrasive substances, in a clean dust free environment.
8 DO NOT place heavy objects on top of the goggles.
3.3. OBSOLESCENCE
Inspect for damage regularly. If the product shows any signs of damage, it must be replaced immediately. The product shelf life/expiry
date is 3 years from date of purchase.
9202.V2 Issue 2 (H,3,F) 12/09/23
Original Language Version
© Jack Sealey Limited
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR
FUTURE USE.
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
REGISTER YOUR
PURCHASE HERE
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts
without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please
email or call our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Specifications

Worksafe 9202 Questions and Answers

See other models: 9711 9362 9361 9117XL 9140L/12