SAFETY GOGGLES WITH DETACHABLE
FACE SHIELD
MODEL NO: SSP76
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. INTRODUCTION
BS EN 166 BT 3 - Manufactured from polycarbonate for superior durability and resistance. Oers full face protection with an increased
range of mobility compared to a standard face protector. Curved face shield conforms to the shape of the face oering improved
protection. Detachable indirect vented goggles to allow for extra versatility. Features a wide-angle curved lens for enhanced visibility.
Adjustable headband with soft PVC frame provides added comfort.
Notied Body: 0086
Type Examination Certicate Number: CE 712096
Carried Out By: BSI Assurance UK Limited
2. SAFETY
9 Ensure the goggles t well to avoid slippage and discomfort.
9 Adjust the headband by pulling/loosening the headband through the buckle.
9 This product is designed for face and eye protection against high speed particles of medium energy impact at extremes of temperature.
9 The visor is designed to be lightweight and comfortable to wear.
9 The product protects against high speed particles worn over standard ophthalmic spectacles, but may transmit impacts, thus creating a
hazard to the wearer.
9 Avoid liquids as small particles can splash into the eyes.
9 Inspect the goggles frequently as a pitted, scratched or dirty face shield reduces vision and should be replaced immediately.
8 DO NOT use if any part of the goggles is cracked or broken.
8 DO NOT place this product on a hot surface.
8 DO NOT use these against heavy impact hazards.
8 DO NOT use these goggles for welding.
IMPORTANT: if protection against high speed particles at extremes of temperature is required, then the selected eye-protector should
be marked with the letter ‘T’ immediately after the impact letter, i.e. FT, BT or AT. If the impact letter is not followed by the letter ‘T’ then
the eye protector shall only be used against high speed particles at room temperature.
3. APPLICATIONS
3.1. EN 166 CATEGORISATION
• Optical Class 1
3.2. MECHANICAL STRENGTH
• BT - High speed particle - medium energy impact at extremes of temperature
• 3 - Protection against droplets of liquid
3.3. EN 170 CATEGORISATION
• 2C-1.2 - Clear lens
4. MAINTENANCE
4.1. CLEANING
8 DO NOT use abrasive materials.
9 Using a soft and clean brush or cloth, use warm suds to wash and clean. Ensure hands are clean (without grease).
9 Materials which may come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals. The contact
areas should be disinfected regularly.
4.2. STORAGE
9 Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust free environment.
9 Use original bag for transportation if possible.
4.3. OBSOLESCENCE
9 Product shelf life/expiry date is dependent on correct storage and general use.
9 Inspect the goggles frequently as a pitted, scratched or dirty face shield reduces vision and should be replaced immediately.
SSP76 Issue 1 20/11/23
Original Language Version
© Jack Sealey Limited
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
REGISTER YOUR
PURCHASE HERE
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
SSP76 Issue 1 20/11/23
Original Language Version
© Jack Sealey Limited
