Loading ...
Loading ...
Loading ...
4.
Remove the plasc sheets on the side of the gang boxes (shown as 1 and 2)
below:
Figure 2-56 Remove the Plasc Sheets
5.
Mark the gang box screw holes on the wall.
1) Route the cables through the gang box hole.
2) Insert the gang box into the
installaon hole.
3) Mark the gang box screw holes' posion with a marker, and take out the
gang box.
Figure 2-57 Mark the Screw Holes
Module Door
Staon User Manual
47
Loading ...
Loading ...
Loading ...