Hikvision IDS-6704NXI-I/BA User Manual

Loading ...

6.3.3 Physical Conict Detecon

Physical conict detecon alarm will be triggered when the movement degree exceeds the set

value in the detecon area.

Before You Start

Ensure the engine mode is set as Work Event Detecon. You can go to Conguraon → System →

VCA Conguraon to congure the engine mode.

Steps

1. Go to Conguraon → VCA → Event Detecon .

2. Select a camera.

3. Select an analysis mode.

Real Time

Provide real-me intelligent analysis for the video stream of the IP camera(s).

Auto-Switch

Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP

camera only).

4. Check Enable Local VCA Event Detecon.

Enable Local VCA Event Detecon

The device will analyze the video, cameras only transmit video stream.

5. Set rules and detecon areas.

1) Click to add a rule.

2) Select Rule Type as Physical Conict Detecon.

3) Enter the rule name.

4) Enable the rule.

5) Set Duraon.

Duraon

The device will trigger an alarm when the me exceeds the limit.

6) Set Sensivity.

Sensivity

The higher the sensivity is, the easier the alarm will be triggered.

7) Set Alarm Interval.

Alarm Interval

Alarm interval is the shortest me interval between two alarms.

8) Oponal: Check Overlay Rule Frame or Overlay Target Frame.

Overlay Rule Frame

The rule frame will be displayed on the captured picture.

Overlay Target Frame

The target frame will be displayed on the captured picture.

Network Video Recorder User Manual

Loading ...

Hikvision IDS-6704NXI-I/BA DeepinMind NVS