Network Video Recorder
User Manual
About this Document
● This Document includes instructions for using and managing the Product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only.
● The information contained in the Document is subject to change, without notice,
due to firmware updates or other reasons. Please find the latest version of the
Document at the Hikvision website (
https://www.hikvision.com). Unless
otherwise agreed, Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates
(hereinafter referred to as "Hikvision") makes no warranties, express or implied.
● Please use the Document with the guidance and assistance of professionals
trained in supporting the Product.
About this Product
● This product can only enjoy the after-sales service support in the country or region
where the purchase is made.
● If the product you choose is a video product, please scan the following QR code to
obtain the "Initiatives on the Use of Video Products", and read it carefully.
Acknowledgment of Intellectual Property Rights
● Hikvision owns the copyrights and/or patents related to the technology embodied
in the Products described in this Document, which may include licenses obtained
from third parties.
● Any part of the Document, including text, pictures, graphics, etc., belongs to
Hikvision. No part of this Document may be excerpted, copied, translated, or
modified in whole or in part by any means without written permission.
● and other Hikvision’s trademarks and logos are the properties
of Hikvision in various jurisdictions.
● Other trademarks and logos mentioned are the properties of their respective
owners.
● The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries.
LEGAL DISCLAIMER
● TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT
AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS".
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK.
IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR
LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE),
PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
● YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION,
OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
● YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS,
AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS
TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
● IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE
APPLICABLE LAW, THE LATTER PREVAILS.
© Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal installaon. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instrucons, may cause harmful interference to radio communicaons. However, there is
no guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separaon between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV technician for help.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
●
This device may not cause harmful interference.
●
This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Direcve 2014/30/EU, LVD Direcve 2014/
35/EU, the RoHS Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the
Network Video Recorder User Manual
iii
purchase of equivalent new equipment, or dispose of it at designated
collecon points. For more informaon see: hp://www.recyclethis.info .
2006/66/EC (baery direcve): This product contains a baery that cannot
be disposed of as unsorted municipal waste in the European Union. See
the product documentaon for specic baery informaon. The baery is
marked with this symbol, which may include leering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to
your supplier or to a designated collecon point. For more informaon
see: hp://www.recyclethis.info .
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Network Video Recorder User Manual
iv
Applicable Model
This manual is applicable to the following models.
Table 1-1 Applicable Model
Series Model
iDS-6700NXI-I/BA iDS-6704NXI-I/BA
iDS-9600NXI-I8/BA iDS-9632NXI-I8/BA
Network Video Recorder User Manual
v
Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note
Provides addional informaon to emphasize or supplement
important points of the main text.
Network Video Recorder User Manual
vi
Safety Instrucon
●
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
●
In the use of the product, you must be in strict compliance with the electrical safety regulaons
of the naon and region.
●
Firmly connect the plug to the power socket. Do not connect several devices to one power
adapter. Power o the device before connecng and disconnecng accessories and peripherals.
●
Shock hazard! Disconnect all power sources before maintenance.
●
The equipment must be connected to an earthed mains socket-outlet.
●
The socket-outlet shall be installed near the equipment and shall be easily accessible.
●
indicates hazardous live and the external wiring connected to the terminals requires
installaon by an instructed person.
●
Never place the equipment in an unstable locaon. The equipment may fall, causing serious
personal injury or death.
●
Input voltage should meet the SELV (Safety Extra Low Voltage) and the LPS (Limited Power
Source) according to the IEC62368.
●
High touch current! Connect to earth before connecng to the power supply.
●
If smoke, odor or noise rise from the device, turn o the power at once and unplug the power
cable, and then please contact the service center.
●
Use the device in conjuncon with an UPS, and use factory recommended HDD if possible.
●
This product contains a coin/buon cell baery. If the baery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
●
This equipment is not suitable for use in locaons where children are likely to be present.
●
CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
●
Improper replacement of the baery with an incorrect type may defeat a safeguard (for
example, in the case of some lithium baery types).
●
Do not dispose of the baery into re or a hot oven, or mechanically crush or cut the baery,
which may result in an explosion.
●
Do not leave the baery in an extremely high temperature surrounding environment, which may
result in an explosion or the leakage of ammable liquid or gas.
●
Do not subject the baery to extremely low air pressure, which may result in an explosion or the
leakage of ammable liquid or gas.
●
Dispose of used baeries according to the instrucons.
●
Keep body parts away from fan blades and motors. Disconnect the power source during
servicing.
●
Keep body parts away from motors. Disconnect the power source during servicing.
Network Video Recorder User Manual
vii
Prevenve and Cauonary Tips
Before connecng and operang your device, please be advised of the following ps:
●
The device is designed for indoor use only. Install it in a well-venlated, dust-free environment
without liquids.
●
Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a
result of dropping it may cause damage to the sensive electronics within the recorder.
●
The equipment shall not be exposed to dripping or splashing and that no objects lled with
liquids shall be placed on the equipment, such as vases.
●
No naked ame sources, such as lighted candles, should be placed on the equipment.
●
The venlaon should not be impeded by covering the venlaon openings with items, such as
newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the
equipment on a bed, sofa, rug or other similar surface.
●
For certain models, ensure correct wiring of the terminals for connecon to an AC mains supply.
●
For certain models, the equipment has been designed, when required, modied for connecon
to an IT power distribuon system.
●
idenes the baery holder itself and idenes the posioning of the cell(s) inside the
baery holder.
●
+ idenes the posive terminal(s) of equipment which is used with, or generates direct current.
+ idenes the negave terminal(s) of equipment which is used with, or generates direct
current.
●
Keep a minimum 200 mm (7.87 inch) distance around the equipment for sucient venlaon.
●
For certain models, ensure correct wiring of the terminals for connecon to an AC mains supply.
●
Use only power supplies listed in the user manual or user instrucon.
●
The USB port of the equipment is used for connecng to a mouse, keyboard, USB ash drive, or
Wi-Fi dongle only.
●
Use only power supplies listed in the user manual or user instrucon.
●
Do not touch the sharp edges or corners.
●
When the device is running above 45 °C (113 °F), or its HDD temperature in S.M.A.R.T. exceeds
the stated value, please ensure the device is running in a cool environment, or replace HDD(s) to
make the HDD temperature in S.M.A.R.T. below the stated value.
Network Video Recorder User Manual
viii
Contents
Chapter 1 Basic Operaon .......................................................................................................... 1
1.1 Acvate Your Device .............................................................................................................. 1
1.1.1 Default User and IP Address ......................................................................................... 1
1.1.2 Acvate via Local Menu ................................................................................................ 1
1.1.3 Acvate via SADP .......................................................................................................... 3
1.1.4 Acvate via Client Soware .......................................................................................... 4
1.1.5 Acvate via Web Browser ............................................................................................. 6
1.2 Congure TCP/IP Sengs ....................................................................................................... 7
1.3 Congure HDD ....................................................................................................................... 8
1.4 Add Network Camera ............................................................................................................. 8
1.4.1 Add Automacally Searched Online Network Camera ................................................. 9
1.4.2 Add Network Camera Manually .................................................................................... 9
1.4.3 Add Network Camera via Customized Protocol .......................................................... 10
1.5 Connect to Plaorm ............................................................................................................. 11
1.5.1 Congure Hik-Connect ................................................................................................ 11
1.5.2 Congure ISUP ............................................................................................................ 12
Chapter 2 Camera Sengs ........................................................................................................ 15
2.1 Congure Image Parameters ................................................................................................ 15
2.2 Congure OSD ...................................................................................................................... 15
2.3 Congure Privacy Mask ........................................................................................................ 16
2.4 IP Camera Time Sync ............................................................................................................ 17
2.5 Import/Export IP Camera Conguraon Files ...................................................................... 18
2.6 Upgrade IP Cameras ............................................................................................................. 18
Chapter 3 Live View .................................................................................................................. 19
3.1 Start Live View ..................................................................................................................... 19
3.1.1 Congure Live View Sengs ....................................................................................... 19
Network Video Recorder User Manual
ix
3.1.2 Congure Live View Layout ......................................................................................... 20
3.2 Congure Auto-Switch of Cameras ...................................................................................... 21
3.3 Digital Zoom ......................................................................................................................... 21
3.4 Fisheye View ........................................................................................................................ 22
3.5 POS Informaon Overlay ..................................................................................................... 23
3.6 3D Posioning ...................................................................................................................... 23
3.7 Live View Strategy ................................................................................................................ 24
3.8 Congure Channel-Zero Encoding ....................................................................................... 24
3.9 Main and Auxiliary Ports Strategy ........................................................................................ 24
3.10 Not Wearing Hard Hat Detecon ....................................................................................... 25
3.11 PTZ Control ........................................................................................................................ 27
3.11.1 Congure PTZ Parameters ......................................................................................... 27
3.11.2 Set a Preset ............................................................................................................... 27
3.11.3 Call a Preset .............................................................................................................. 28
3.11.4 Set a Patrol ................................................................................................................ 29
3.11.5 Call a Patrol ............................................................................................................... 30
3.11.6 Set a Paern .............................................................................................................. 31
3.11.7 Call a Paern ............................................................................................................. 31
3.11.8 Set Linear Scan Limit ................................................................................................. 32
3.11.9 One-Touch Park ......................................................................................................... 32
3.11.10 Auxiliary Funcons .................................................................................................. 33
Chapter 4 Recording and Playback ............................................................................................ 35
4.1 Recording ............................................................................................................................. 35
4.1.1 Congure Recording Parameters ................................................................................ 35
4.1.2 Enable H.265 Stream Access ....................................................................................... 37
4.1.3 ANR ............................................................................................................................. 37
4.1.4 Manual Recording ....................................................................................................... 38
4.1.5 Congure Plan Recording ............................................................................................ 38
Network Video Recorder User Manual
x
4.1.6 Congure Connuous Recording ................................................................................ 39
4.1.7 Congure Moon Detecon Triggered Recording ...................................................... 40
4.1.8 Congure Event Triggered Recording .......................................................................... 40
4.1.9 Congure Alarm Triggered Recording ......................................................................... 40
4.1.10 Congure Picture Capture ......................................................................................... 41
4.1.11 Congure Holiday Recording ..................................................................................... 41
4.1.12 Congure Redundant Recording and Capture .......................................................... 42
4.2 Playback ............................................................................................................................... 43
4.2.1 Instant Playback .......................................................................................................... 43
4.2.2 Play Normal Video ...................................................................................................... 44
4.2.3 Play Smart Searched Video ......................................................................................... 45
4.2.4 Play Custom Searched Files ......................................................................................... 45
4.2.5 Play Tag Files ............................................................................................................... 46
4.2.6 Play by Sub-periods ..................................................................................................... 47
4.2.7 Play Log Files ............................................................................................................... 48
4.2.8 Play External Files ....................................................................................................... 48
4.3 Playback Operaons ............................................................................................................ 49
4.3.1 Normal/Important/Custom Video .............................................................................. 49
4.3.2 Set Play Strategy in Important/Custom Mode ............................................................ 49
4.3.3 Edit Video Clips ........................................................................................................... 49
4.3.4 Switch between Main Stream and Sub-Stream .......................................................... 50
4.3.5 Thumbnails View ......................................................................................................... 50
4.3.6 Fisheye View ............................................................................................................... 50
4.3.7 POS Informaon Overlay ............................................................................................. 51
4.3.8 Fast View ..................................................................................................................... 51
4.3.9 Digital Zoom ................................................................................................................ 52
Chapter 5 Event ........................................................................................................................ 53
5.1 Normal Event Alarm ............................................................................................................. 53
Network Video Recorder User Manual
xi
5.1.1 Congure Moon Detecon Alarms ........................................................................... 53
5.1.2 Congure Video Loss Alarms ....................................................................................... 53
5.1.3 Congure Video Tampering Alarms ............................................................................ 53
5.1.4 Congure Sensor Alarms ............................................................................................. 54
5.1.5 Congure Excepons Alarms ...................................................................................... 54
5.2 VCA Event Alarm .................................................................................................................. 55
5.2.1 Facial Detecon ........................................................................................................... 55
5.2.2 Congure Vehicle Detecon ....................................................................................... 56
5.2.3 Loitering Detecon ..................................................................................................... 57
5.2.4 People Gathering Detecon ........................................................................................ 58
5.2.5 Fast Moving Detecon ................................................................................................ 59
5.2.6 Parking Detecon ........................................................................................................ 60
5.2.7 Unaended Baggage Detecon .................................................................................. 61
5.2.8 Object Removal Detecon .......................................................................................... 63
5.2.9 Audio Excepon Detecon .......................................................................................... 64
5.2.10 Defocus Detecon ..................................................................................................... 65
5.2.11 Sudden Scene Change Detecon .............................................................................. 66
5.2.12 PIR Alarm .................................................................................................................. 66
5.2.13 Thermal Camera Detecon ....................................................................................... 67
5.2.14 Queue Management ................................................................................................. 68
5.3 Congure Arming Schedule ................................................................................................. 68
5.4 Congure Linkage Acons .................................................................................................... 69
5.4.1 Congure Auto-Switch Full Screen Monitoring ........................................................... 69
5.4.2 Congure Audio Warning ............................................................................................ 70
5.4.3 Nofy Surveillance Center .......................................................................................... 70
5.4.4 Congure Email Linkage .............................................................................................. 70
5.4.5 Trigger Alarm Output .................................................................................................. 71
5.4.6 Congure PTZ Linkage ................................................................................................. 71
Network Video Recorder User Manual
xii
Chapter 6 Smart Analysis .......................................................................................................... 72
6.1 Engine Conguraon ........................................................................................................... 72
6.2 Work Event Detecon .......................................................................................................... 72
6.2.1 Absence/Sleep on Duty Detecon .............................................................................. 72
6.2.2 Staying Overme Detecon ........................................................................................ 74
6.2.3 Number of People Excepon Detecon ...................................................................... 75
6.2.4 Playing Mobile Phone Detecon ................................................................................. 76
6.3 Street Event Detecon ......................................................................................................... 78
6.3.1 People Gathering Detecon ........................................................................................ 78
6.3.2 People Running Detecon .......................................................................................... 80
6.3.3 Physical Conict Detecon .......................................................................................... 82
6.3.4 People Falling Down Detecon ................................................................................... 83
6.4 Hard Hat Detecon .............................................................................................................. 84
6.5 Face Picture Library Management ....................................................................................... 86
6.5.1 Add a Face Picture Library ........................................................................................... 86
6.5.2 Upload Face Pictures to the Library ............................................................................ 86
6.6 People Counng ................................................................................................................... 87
6.6.1 People Counng Stascs ........................................................................................... 87
6.6.2 Regional People Counng ........................................................................................... 88
6.7 Smart Search ........................................................................................................................ 89
6.7.1 Face Picture Search ..................................................................................................... 89
6.7.2 Event Detecon Search ............................................................................................... 93
6.7.3 Not Wearing Hard Hat Search ..................................................................................... 94
6.7.4 Regional People Counng Search ............................................................................... 95
6.7.5 Human Body Detecon Search ................................................................................... 95
6.7.6 Vehicle Search ............................................................................................................. 96
6.8 Smart Report ........................................................................................................................ 97
6.8.1 View People Counng Stascs .................................................................................. 97
Network Video Recorder User Manual
xiii
6.8.2 Heat Map .................................................................................................................... 98
6.9 Target Detecon ................................................................................................................... 98
Chapter 7 File Management .................................................................................................... 100
7.1 Search Files ........................................................................................................................ 100
7.2 Export Files ........................................................................................................................ 100
7.3 Smart Search ...................................................................................................................... 101
Chapter 8 POS Conguraon .................................................................................................. 102
8.1 Congure POS Connecon ................................................................................................. 102
8.2 Congure POS Text Overlay ................................................................................................ 105
8.3 Congure POS Alarm .......................................................................................................... 106
Chapter 9 Storage ................................................................................................................... 108
9.1 Storage Device Management ............................................................................................. 108
9.1.1 Manage Local HDD .................................................................................................... 108
9.1.2 Add a Network Disk .................................................................................................. 110
9.1.3 Manage eSATA ........................................................................................................... 111
9.2 Disk Array ........................................................................................................................... 113
9.2.1 Create a Disk Array .................................................................................................... 113
9.2.2 Rebuild an Array ........................................................................................................ 115
Chapter 10 Hot Spare Recorder Backup ................................................................................... 118
10.1 Set Hot Spare Device ........................................................................................................ 118
10.2 Set Working Recorder ...................................................................................................... 119
10.3 Manage Hot Spare System ............................................................................................... 119
Chapter 11 Network Sengs .................................................................................................. 121
11.1 Congure DDNS ............................................................................................................... 121
11.2 Congure PPPoE .............................................................................................................. 121
11.3 Congure Port Mapping (NAT) ......................................................................................... 122
11.4 Congure SNMP ............................................................................................................... 123
11.5 Congure Email ................................................................................................................ 125
Network Video Recorder User Manual
xiv
11.6 Congure Port .................................................................................................................. 126
11.7 Congure ONVIF .............................................................................................................. 128
Chapter 12 User Management and Security ............................................................................ 129
12.1 Manage User Accounts .................................................................................................... 129
12.1.1 Add a User ............................................................................................................... 129
12.1.2 Edit the Admin User ................................................................................................ 130
12.1.3 Edit an Operator/Guest User .................................................................................. 131
12.2 Manage User Permissions ................................................................................................ 131
12.2.1 Set User Permissions ............................................................................................... 131
12.2.2 Set Live View Permission on Lock Screen ................................................................ 134
12.3 Congure Password Security ........................................................................................... 135
12.3.1 Export GUID File ...................................................................................................... 135
12.3.2 Congure Security Quesons .................................................................................. 135
12.4 Reset Password ................................................................................................................ 136
12.4.1 Reset Password by GUID ......................................................................................... 136
12.4.2 Reset Password by Security Quesons ................................................................... 137
Chapter 13 System Management ............................................................................................ 138
13.1 Congure Device .............................................................................................................. 138
13.2 Congure Time ................................................................................................................. 138
13.2.1 Manual Time Synchronizaon ................................................................................. 138
13.2.2 NTP Synchronizaon ............................................................................................... 139
13.2.3 DST Synchronizaon ............................................................................................... 139
13.3 Network Detecon ........................................................................................................... 140
13.3.1 Network Trac Monitoring ..................................................................................... 140
13.3.2 Test Network Delay and Packet Loss ....................................................................... 140
13.3.3 Export Network Packet ........................................................................................... 141
13.3.4 Network Resource Stascs .................................................................................... 141
13.4 Storage Device Maintenance ........................................................................................... 142
Network Video Recorder User Manual
xv
13.4.1 Bad Sector Detecon .............................................................................................. 142
13.4.2 S.M.A.R.T. Detecon ................................................................................................ 143
13.4.3 HDD Health Detecon ............................................................................................. 144
13.4.4 Congure Disk Clone ............................................................................................... 144
13.4.5 Repair Database ...................................................................................................... 145
13.5 Upgrade Device ................................................................................................................ 146
13.5.1 Upgrade by Local Backup Device ............................................................................ 146
13.5.2 Upgrade by FTP ....................................................................................................... 146
13.5.3 Upgrade by Web Browser ....................................................................................... 147
13.6 Import/Export Device Conguraon Files ........................................................................ 147
13.7 Search & Export Log Files ................................................................................................. 148
13.8 Restore Default Sengs ................................................................................................... 148
13.9 Security Management ...................................................................................................... 149
13.9.1 RTSP Authencaon ............................................................................................... 149
13.9.2 ISAPI Service ............................................................................................................ 150
13.9.3 HTTP Authencaon ............................................................................................... 150
Chapter 14 Appendix .............................................................................................................. 151
14.1 Glossary ........................................................................................................................... 151
14.2 Communicaon Matrix .................................................................................................... 152
14.3 Device Command ............................................................................................................. 152
14.4 Frequently Asked Quesons ............................................................................................ 153
14.4.1 Why is there a part of channels displaying “No Resource” or turning black screen in
mul-screen live view? ...................................................................................................... 153
14.4.2 Why is the video recorder nofying the stream type is not supported? ................ 153
14.4.3 Why is the video recorder nofying risky password aer a network camera is added?
............................................................................................................................................ 154
14.4.4 How to improve the playback image quality? ......................................................... 154
14.4.5 How to conrm the video recorder is using H.265 to record video? ...................... 154
14.4.6 Why is the meline at playback not constant? ....................................................... 154
Network Video Recorder User Manual
xvi
14.4.7 Why is the video recorder nofying the network is unreachable when a network
camera is being added? ..................................................................................................... 155
14.4.8 Why is the IP address of network camera being changed automacally? .............. 155
14.4.9 Why is the video recorder nofying IP conict? ..................................................... 155
14.4.10 Why is image geng stuck when playing back by single or mul-channel cameras?
............................................................................................................................................ 156
14.4.11 Why does my video recorder make a beeping sound aer boong? ................... 156
14.4.12 Why is there no recorded video aer the moon detecon is set? ..................... 156
14.4.13 Why is the video sound quality not good? ............................................................ 157
Network Video Recorder User Manual
xvii
Chapter 1 Basic Operaon
1.1 Acvate Your Device
1.1.1 Default User and IP Address
●
Default administrator account: admin.
●
Default IPv4 address: 192.168.1.64.
1.1.2 Acvate via Local Menu
For the rst-me access, you need to acvate the device by seng an admin password. No
operaon is allowed before acvaon. You can also acvate the device via Web Browser, SADP or
Client Soware.
Steps
1. Enter the admin password twice.
Network Video Recorder User Manual
1
Figure 1-1 Acvate via Local Menu
Warning
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can beer protect your product.
2. Enter the password to acvate the IP cameras.
3. Oponal: Check Export GUID, or Security Queson Conguraon.
4. Click OK.
Note
●
Aer the device is acvated, you should properly keep the password.
●
You can duplicate the password to the IP cameras that are connected with default protocol.
Network Video Recorder User Manual
2
What to do next
●
When you have enabled Export GUID, connue to export the GUID le to the USB ash driver
for the future password reseng.
●
When you have enabled Security Queson Conguraon, connue to set the security quesons
for the future password reseng.
1.1.3 Acvate via SADP
SADP soware is used for detecng the online device, acvang the device, and reseng its
password.
Before You Start
Get the SADP soware from the supplied disk or the ocial website, and install the SADP
according to the prompts.
Steps
1. Connect your video recorder power supply to an electrical outlet and turn on it.
2. Run the SADP soware to search the online recorders.
3. Check the recorder status from the device list, and select the inacve recorder.
Figure 1-2 Acvate via SADP
4. Create and input the new password in the password eld, and conrm the password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can beer protect your product.
5. Click Acvate.
Network Video Recorder User Manual
3
1.1.4 Acvate via Client Soware
The client soware is versale video management soware for mulple kinds of devices.
Before You Start
Get the client soware from the supplied disk or the ocial website, and install the soware
according to the prompts.
Steps
1. Run the client soware and the control panel of the soware pops up, as shown below.
Figure 1-3 Control Panel
2. Click Device Management to enter the Device Management interface, as shown below.
Network Video Recorder User Manual
4
Figure 1-4 Device Management Interface
3. Check the recorder status from the device list, and select an inacve recorder.
4. Click Acvate to pop up the Acvaon interface.
5. Create a password and input the password in the password eld, and conrm the password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can beer protect your product.
Figure 1-5 Acvaon
6. Click OK to start acvaon.
Network Video Recorder User Manual
5
7. Click Modify Nenfo to pop up the Network Parameter Modicaon interface, as shown below.
Figure 1-6 Modify Network Parameters
8. Change the recorder IP address to the same subnet with your computer.
-
Modify the IP address manually.
-
Check Enable DHCP.
9. Input the password to acvate your IP address modicaon.
1.1.5 Acvate via Web Browser
You can get access to the recorder via web browser. You may use one of the following listed web
browsers: Internet Explorer 6.0 and above, Apple Safari, Mozilla Firefox, and Google Chrome. The
supported resoluons include 1024*768 and above.
Steps
1. Enter the IP address in web browser, and then press Enter.
Figure 1-7 Web Browser Acvaon
2. Set the password for the admin user account.
Network Video Recorder User Manual
6
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can beer protect your product.
3. Click OK.
1.2 Congure TCP/IP Sengs
TCP/IP sengs must be properly congured before you can operate the device will operate over a
network.
Steps
1. Go to System → Network → TCP/IP .
Figure 1-8 TCP/IP Sengs
2. Select Working Mode as Net-Fault Tolerance or Mul-Address Mode.
Net-Fault Tolerance
The two NIC cards use the same IP address, and you can select the main NIC to LAN1 or LAN2.
In this way, in case of one NIC card failure, the device will automacally enable the other
standby NIC card so as to ensure the normal running of the system.
Mul-Address Mode
The parameters of the two NIC cards can be congured independently. You can select LAN1
or LAN2 under Select NIC for parameter sengs. Select one NIC card as the default route.
When the system connects with the extranet, the data will be forwarded through the default
route.
3. Congure other IP sengs as needed.
4. Click Apply.
Network Video Recorder User Manual
7
Note
●
Check Enable DHCP to obtain IP sengs automacally if a DHCP server is available on the
network.
●
Valid MTU value range is 500 to 9676.
1.3 Congure HDD
Ensure the video recorder storage media is well. You can install at least one HDD and inialize it, or
create a RAID and inialize it.
1.4 Add Network Camera
Before you can get live video or record the video les, you must add the network cameras to the
connecon list of the device.
Before You Start
Ensure the network connecon is valid and correct and the IP camera to add has been acvated.
Steps
1. Click on the main menu bar.
2. Click Custom Add tab on the tle bar.
Figure 1-9 Add IP Camera
3. Enter IP address, protocol, management port, and other IP camera informaon to add.
4. Enter the login user name and password of the IP camera.
5. Click Add to nish the adding of the IP camera.
6. Oponal: Click Connue to Add to connue to add addional IP cameras.
Network Video Recorder User Manual
8
1.4.1 Add Automacally Searched Online Network Camera
Steps
1. Click on the main menu.
2. Click Number of Unadded Online Device at the boom.
3. Select the automacally searched online network cameras.
4. Click Add to add the camera which has the same login password with the video recorder.
Figure 1-10 Add Automacally Searched Online Network Camera
Note
If the network camera to add has not been acvated, you can acvate it in the network camera
list of camera management interface.
1.4.2 Add Network Camera Manually
Before you view live video or record video les, you must add network cameras to the device.
Before You Start
Ensure the network connecon is valid and correct, and the network camera is acvated.
Steps
1. Click
on the main menu.
2. Click Custom Add.
3. Set the parameters. For example, IP Camera Address, Protocol, etc.
Note
Management port ranges from 1 to 65535.
Network Video Recorder User Manual
9
Figure 1-11 Add Network Camera
4. Oponal: Check Use Channel Default Password to use the default password to add the camera.
5. Oponal: Check Use Default Port to use the default management port to add the camera. For
SDK service, the default port value is 8000. For enhanced SDK service, the default value is 8443.
Note
The funcon is only available when you use HIKVISION protocol.
6. Oponal: Check Verify Cercate to verify the camera with cercate. The cercate is a form
of idencaon for the camera that provides more secure camera authencaon. It requires to
import the network camera cercate to the device rst when you use this funcon. For details,
refer to .
Note
The enhanced SDK service is only available when you use HIKVISION protocol.
7. Click Add.
8. Oponal: Check Connue to Add to add other network cameras.
1.4.3 Add Network Camera via Customized Protocol
For network cameras that are not using standard protocols, you can congure customized
protocols to add them. The system provides 16 customized protocols.
Steps
1. Go to More Sengs → Protocol .
Network Video Recorder User Manual
10
Figure 1-12 Protocol Management
2. Set protocol parameters.
Type
The network camera adopng custom protocol must support geng stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
geng main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
3. Click OK.
4. Click Custom Add to add cameras.
5. Set the parameters.
6. Click OK.
1.5 Connect to Plaorm
1.5.1 Congure Hik-Connect
Hik-Connect provides mobile phone applicaon and plaorm service to access and manage your
video recorder, which enables you to get a convenient remote access to the video security system.
Steps
1. Go to System → Network → Advanced → Plaorm Access .
2. Check Enable to acvate the funcon. Then the service terms will pop up.
1) Enter Vericaon Code.
Network Video Recorder User Manual
11
2) Scan the QR code to read the service terms and privacy statement.
3) Check The Hik-Connect service will require internet access. Please read Service Terms and
Privacy Statement before enabling the service. if you agree with the service terms and
privacy statement.
4) Click OK.
Note
●
Hik-Connect is disabled by default.
●
The vericaon code is empty by default. It must contain 6 to 12 leers or numbers, and it is
case sensive.
3. Oponal: Check Custom and enter Server Address as your desire.
4. Oponal: Check Enable Stream Encrypon, then vericaon code is required for remote access
and live view.
5. Bind your device with a Hik-Connect account.
1) Use a smart phone to scan the QR code, and download Hik-Connect app. You can also
download it from hps://appstore.hikvision.com , or the QR code below. Refer to Hik-
Connect Mobile Client User Manual for details.
Figure 1-13 Download Hik-Connect
2) Use Hik-Connect to scan the device QR, and bind the device.
Note
If the device is already bound with an account, you can click Unbind to unbind with the
current account.
6. Click Apply.
What to do next
You can access your video recorder via Hik-Connect.
1.5.2 Congure ISUP
SDK is based on Intelligent Security Uplink Protocol (ISUP). It provides APIs, library les, and
commands for the third-party plaorm to access devices such as NVRs, speed domes, DVRs,
Network Video Recorder User Manual
12
network cameras, mobile NVRs, mobile devices, decoding devices, etc. With this protocol, the
third-party plaorm can realize funcons like live view, playback, two-way audio, PTZ control, etc.
Steps
1. Go to System → Network → Advanced → Plaorm Access .
Figure 1-14 ISUP Sengs
2. Select Access Type as ISUP.
3. Check Enable.
Note
Enabling ISUP will disable other plaorm access.
4. Set the related parameters.
Server Address
The plaorm server IP address.
Server Port
The plaorm server port, ranges from 1024 to 65535. The actual port shall be provided by
the plaorm.
Device ID
Device ID shall be provided by the plaorm.
Version
ISUP protocol version, only V5.0 is available.
Encrypon Password
Encrypon password is required when using ISUP V5.0 version, it provides more secure
communicaon between the device and plaorm. Enter it for vericaon aer the device is
registered to the ISUP plaorm. It cannot be empty, or "ABCDEF".
5. Click Apply to save the sengs and restart the device.
Network Video Recorder User Manual
13
What to do next
You can see the registraon status (online or oine) aer the device is restarted.
Network Video Recorder User Manual
14
Chapter 2 Camera Sengs
2.1 Congure Image Parameters
You can customize image parameters, including day/night switch, backlight, contrast, and
saturaon in Camera → Display .
Image Sengs
Customize the image parameters including brightness, contrast, and saturaon.
Exposure
Set the camera exposure me (1/10000 to 1 sec). A larger exposure value results in a brighter
image.
Day/Night Switch
Set the camera to day, night, or auto switch mode according to me or the surrounding
illuminaon condion. When the light diminishes at night, the camera can switches to night
mode with high quality black and white image.
Backlight
Set the camera's wide dynamic range (0 to 100). When the surrounding illuminaon and the
object have large dierences in brightness, you can set the WDR value to balance the brightness
level of the whole image.
Image Enhancement
For opmized image contrast enhancement that reduces noise in video stream.
2.2 Congure OSD
You can congure the OSD (On-screen Display) for the camera, including date/me, camera name,
etc.
Steps
1. Go to Camera → Display .
2. Select a camera as your desire.
3. Edit name in Camera Name.
4. Check Display Name, Display Date and Display Week to show the informaon on the image.
5. Set the date format, me format, and display mode.
Network Video Recorder User Manual
15
Figure 2-1 OSD Sengs
6. Drag the text frame on the preview window to adjust the OSD posion.
7. Click Apply.
2.3 Congure Privacy Mask
The privacy mask protects personal privacy by concealing parts of the image from kive view or
recording with a masked area.
Steps
1. Go to Camera → Privacy Mask .
2. Select a camera to set privacy mask.
3. Check Enable.
4. Draw a zone on the window. The zone will be marked by dierent frame colors.
Network Video Recorder User Manual
16
Figure 2-2 Privacy Mask Sengs
Note
●
Up to 4 privacy masks zones can be congured and the size of each area can be adjusted.
●
You can clear the congured privacy mask zones on the window by clicking the corresponding
clear zone 1 to 4 icons on the right of the window, or click Clear All to clear all zones.
5. Click Apply.
2.4 IP Camera Time Sync
The device can automacally synchronize the me of connected IP camera aer enabling this
funcon.
Steps
1. Go to Camera → Camera → IP Camera .
2. Posion the cursor on the window of the IP camera and click
.
3. Check Enable IP Camera Time Sync.
4. Click OK.
Network Video Recorder User Manual
17
2.5 Import/Export IP Camera Conguraon Files
The IP camera informaon, including the IP address, manage port, password of admin, etc., can be
saved in Microso Excel format and backed up to the local device. The exported le can be edited
on a PC, including adding or deleng the content, and copying the seng to other devices by
imporng the Excel le to it.
Before You Start
When imporng the conguraon le, connect the storage device that contains the conguraon
le to the device.
Steps
1. Go to Camera → IP Camera Import/Export .
2. Click IP Camera Import/Export, and the detected external device contents appear.
3. Export or import the IP camera conguraon les.
-
Click Export to export the conguraon les to the selected local backup device.
-
To import a conguraon le, select the le from the selected backup device and click Import.
Note
Aer the imporng process is completed, you must reboot the device to acvate the sengs.
2.6 Upgrade IP Cameras
The IP camera can be remotely upgraded through the device.
Before You Start
Ensure you have inserted the USB ash drive to the device, and it contains the IP camera upgrade
rmware.
Steps
1. On the camera management interface, select a camera.
2. Go to More Sengs → Upgrade .
3. Select the rmware upgrade le from the USB ash drive.
4. Click Upgrade.
The IP camera will reboot automacally aer the upgrading completes.
Network Video Recorder User Manual
18
Chapter 3 Live View
Live view displays the video image geng from each camera in real me.
3.1 Start Live View
Click on the main menu bar to enter the Live View.
●
Select a window and double click a camera from the list to play the video from the camera in the
selected window.
●
Use the toolbar at the playing window boom to realize the capture, instant playback, audio on/
o, digital zoom, live view strategy, show informaon and start/stop recording, etc.
3.1.1 Congure Live View Sengs
Live View sengs can be customized. You can congure the output interface, dwell me for screen
to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps
1. Go to System → Live View → General .
Figure 3-1 Live View-General
2. Congure the live view parameters.
Video Output Interface
Select the video output to congure.
Live View Mode
Select the display mode for Live View, e.g., 2*2, 1*5, etc.
Dwell Time
The me in seconds to wait between switching of cameras when using auto-switch in Live
View.
Enable Audio Output
Enable/disable audio output for the selected video output.
Network Video Recorder User Manual
19
Volume
Adjust the Live View volume, playback and two-way audio for the selected output interface.
Event Output
Select the output to show event video.
Full Screen Monitoring Dwell Time
Set the me in seconds to show alarm event screen.
3. Click OK.
3.1.2 Congure Live View Layout
Live view displays the video image geng from each camera in real me.
Congure Custom Live View Layout
Steps
1. Go to System → Live View → View .
2. Click Set Custom Layout.
3. Click on the Custom Layout Conguraon interface.
4. Edit the layout name.
5. Select a window division mode from the toolbar.
Figure 3-2 Congure Live View Layout
6. Select mulple windows and click to joint the windows. The selected windows must be in
rectangle area.
7. Click Save.
The successfully congured layout is displayed in the list.
Network Video Recorder User Manual
20
8. Oponal: Select a live view layout from the list and click to edit the name, or click to
delete the name.
Congure Live View Mode
Steps
1. Go to System → Live View → View .
2. Select the video output interface.
3. Select a layout or custom layout from the toolbar.
4. Select a division window, and double-click on a camera in the list to link the camera to the
window.
Note
●
You can also click-and-drag the camera to the desired window on the Live View interface to
set the camera order.
●
You can enter the number in the text eld to quickly search the camera from the list.
5. Click Apply.
6. Oponal: Click to start live view for all channels, or click to stop all live view channels.
3.2 Congure Auto-Switch of Cameras
You can set the auto-switch of cameras to play in dierent display modes.
Steps
1. Go to System → Live View → General .
2. Set Video Output Interface, Live View Mode, and Dwell Time.
Video Output Interface
Select the video output interface.
Live View Mode
Select the display mode for live view, e.g., 2*2, 1*5, etc.
Dwell Time
The me in seconds to dwell between switching of cameras when enabling auto-switch. The
range is from 5s to 300s.
3. Go to View Sengs to set the view layout.
4. Click OK to save the sengs.
3.3 Digital Zoom
Digital Zoom zooms into the live image in dierent magnicaons (1x to 16x).
Network Video Recorder User Manual
21
Steps
1. Start live view.
2. Click from the toolbar.
3. Move the sliding bar or scroll the mouse wheel to zoom in/out the image to dierent
magnicaons (1x to 16x).
Figure 3-3 Digital Zoom
3.4 Fisheye View
The device supports the sheye camera expansion in Live View or playback mode.
Before You Start
●
The sheye expansion view feature is supported only by certain models.
●
The connected camera must support the sheye view.
Steps
1. Start live view, click
to enter the sheye expansion mode.
2. Select the expansion view mode.
Table 3-1 Fisheye View Icon Descripon
Icon Descripon Icon Descripon
180° Panorama ( ) Switch the Live View
image to the 180°
panorama view.
360° Panorama ( ) Switch the Live View
image to the 360°
panorama view.
PTZ Expansion ( ) The PTZ Expansion is
the close-up view of
some dened area in
Radial Expansion ( ) In radial expansion
mode, the whole
wide-angle view of the
Network Video Recorder User Manual
22
Icon Descripon Icon Descripon
the sheye view or
panorama expansion.
It supports the
electronic PTZ
funcon, also called e-
PTZ.
sheye camera is
displayed. This view
mode is called Fisheye
View because it
approximates the
vision of a sh’s
convex eye. The lens
produces curvilinear
images of a large area,
while distorng the
perspecve and
angles of objects in
the image.
3.5 POS Informaon Overlay
The device can be connected with the POS machine/server, and receive the transacon message
for overlay on the image during playback.
Note
When the playing speed is higher than 2x, the POS informaon cannot be overlaid on the video.
In the video live or playback mode, click to overlay the POS transacon informaon on the
playback video.
3.6 3D Posioning
3D Posioning zooms in/out a specic live image area.
Steps
1. Start live view, and click .
2. Zoom in/out the image.
-
Zoom in: Click on the desired posion in the video image and drag a rectangle area in the
lower right direcon to zoom in.
-
Zoom out: Drag a rectangle area in the upper le direcon to move the posion to the center
and enable the rectangle area to zoom out.
Network Video Recorder User Manual
23
3.7 Live View Strategy
Steps
1. In the live view mode, click to enter the digital zoom operaon interface in full screen mode.
2. Select the live view strategy to Real-me, Balanced or Fluency.
3.8 Congure Channel-Zero Encoding
Enable the channel-zero encoding when you need to get a remote view of many channels in real
me from a web browser or CMS (Client Management System) soware, in order to decrease the
bandwidth requirement without aecng the image quality.
Steps
1. Go to System → Live View → Channel-Zero .
2. Check Enable Channel-Zero Encoding.
Figure 3-4 Channel-Zero Encoding
3. Congure Frame Rate, Max. Bitrate Mode, and Max. Bitrate.
Note
The higher frame rate and bitrate require the higher bandwidth.
4. Click Apply.
You can view all the channels on one screen via CMS or web browser.
3.9 Main and Auxiliary Ports Strategy
There are three video output types: HDMI, VGA, and HDMI2. Priority of video outputs: HDMI >
VGA > HDMI2.
You can go to System → General to congure HDMI/VGA simultaneous output and menu output
mode.
Main port
All operaons are available for main port.
Network Video Recorder User Manual
24
Aux port
You can switch to aux port to do some basic operaons, like playback, switching live view image.
Third port
You can only preview camera image in third port.
Table 3-2 Main and Auxiliary Ports Strategy
HDMI/VGA
simultaneous
output
Menu output
mode
HDMI HDMI2 VGA
On Auto Main port Aux port Main port
O Auto Main port Aux port Third port
On HDMI2 Aux port Main port Aux port
O HDMI2 Aux port Main port Third port
On HDMI/VGA Main port Aux port Main port
O VGA Aux port Third port Main port
HDMI Main port Third port Aux port
3.10 Not Wearing Hard Hat Detecon
You can view real-me results of not wearing hard hat detecon.
Before You Start
Ensure you have properly congured the detecon rules of not wearing hard hat detecon. Refer
to Hard Hat Detecon for details.
Steps
1. Go to live view interface, and click
in the toolbar.
2. Click , , or to adjust window division.
3. Select a window as you desired.
4. Double click a camera from the camera list on the le boom.
Network Video Recorder User Manual
25
Figure 3-5 Not Wearing Hard Hat Detecon
5. Click Records to select and view real-me detecon records. The records will also be shown in
the window on the right. The detecon number are displayed at the top, including the not
wearing hard hat number, matched person number and unmatched person number.
6. Oponal: For the unregistered face picture, you can double click it in records list, and add it to
face picture library.
Note
For guest and operator user, it requires Local Parameters Sengs permission to add
unregistered face picture to face picture library.
7. Oponal: Click at the upper right corner to congure the display and audio linkage sengs as
you desired.
Congure
Display
Sengs
The device will display a prompt when an alarm is triggered. You can edit the
prompt theme, prompt informaon, and prompt picture. If Alarm Picture is
set as Capture Pic, it will display the real-me captured picture. If Alarm
Picture is set as FaceLib Pic, it will display the picture from face picture
library.
Congure
Audio
Linkage
Sengs
The device will play an audio le when an alarm is triggered.
a. Click On to turn on audio linkage.
b. Set Audio Output.
c. Set Audio Source. If you set Audio Source as Custom, it requires to click
View to import audio les from peripherals.
d. Click OK.
8. Oponal: Click
at the upper right corner to search and export record.
Network Video Recorder User Manual
26
Note
●
Ensure you have inserted USB ash drive before export.
●
For guest and operator user, it requires "Local Video Export permission" (in "Camera
Permission") to search and export record.
3.11 PTZ Control
3.11.1 Congure PTZ Parameters
Follow these procedures to set the PTZ parameters. The PTZ parameters conguraon must be
done before you can control the PTZ camera.
Steps
1. Click on the quick sengs toolbar of the PTZ camera.
2. Click PTZ Parameters Sengs to set the PTZ parameters.
Figure 3-6 PTZ Parameters Sengs
3. Edit the PTZ parameters.
Note
All the parameters should be exactly match the PTZ camera parameters.
4. Click OK to save the sengs.
3.11.2 Set a Preset
Presets record the PTZ posion and the status of zoom, focus, iris, etc. You can call a preset to
quickly move the camera to the predened posion.
Network Video Recorder User Manual
27
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click direconal buons to wheel the camera to a locaon.
3. Adjust the zoom, focus and iris status.
4. Click in the lower right corner of Live View to set the preset.
Figure 3-7 Set Preset
5. Select the preset No. (1 to 255) from the drop-down list.
6. Enter the preset name.
7. Click Apply to save the preset.
8. Oponal: Click Cancel to cancel the locaon informaon of the preset.
9. Oponal: Click in the lower right corner of Live View to view the congured presets.
Figure 3-8 View the Congured Presets
3.11.3 Call a Preset
A preset enables the camera to point to a specied posion such as a window when an event takes
place.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's Live View.
2. Click in the lower right corner of Live View to set the preset.
3. Select the preset No. from the drop-down list.
4. Click Call to call it, or click in the lower right corner of Live View, and click the congured
preset to call it.
Figure 3-9 Call Preset (1)
Figure 3-10 Call Preset (2)
Network Video Recorder User Manual
28
3.11.4 Set a Patrol
Patrols can be set to move the PTZ to key points and have it stay there for a set duraon before
moving on to the next key point. The key points are correspond to the presets.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click Patrol to congure patrol.
Figure 3-11 Patrol Conguraon
3. Select the patrol No.
4. Click Set.
Figure 3-12 Patrol Sengs
5. Click to add a key point to the patrol.
Network Video Recorder User Manual
29
Figure 3-13 Key Point Conguraon
1) Congure key point parameters.
Preset
Determines the order the PTZ will follow while cycling through the patrol.
Speed
Denes the speed the PTZ will move from one key point to the next.
Duraon
Refers to the duraon to stay at the corresponding key point.
2) Click Apply to save the key points to the patrol.
6. Other operaon is as follows.
Table 3-3 Operaon Descripon
Operaon Descripon Operaon Descripon
Select a key point to delete. Edit the added key point.
Adjust the key point order Adjust the key point order
7. Click Apply to save the patrol sengs.
3.11.5 Call a Patrol
Calling a patrol makes the PTZ move according to the predened patrol path.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click Patrol on the PTZ control panel.
Network Video Recorder User Manual
30
Figure 3-14 Patrol Conguraon
3. Select a patrol.
4. Click Call to start the patrol.
5. Oponal: Click Stop to stop the patrol.
3.11.6 Set a Paern
Paerns can be set by recording the movement of the PTZ. You can call the paern to make the
PTZ move according to the predened path.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click Paern to congure a paern.
Figure 3-15 Paern Conguraon
3. Select the paern No.
4. Set the paern.
1) Click Record to start recording.
2) Click corresponding buons on the control panel to move the PTZ camera.
3) Click Stop to stop recording. The PTZ movement is recorded as the paern.
3.11.7 Call a Paern
Follow the procedure to move the PTZ camera according to the predened paerns.
Steps
1. Click
on the quick sengs toolbar of the PTZ camera's live view.
2. Click Paern to congure paern.
Network Video Recorder User Manual
31
Figure 3-16 Paern Conguraon
3. Select a paern.
4. Click Call to start the paern.
5. Oponal: Click Stop to stop the paern.
3.11.8 Set Linear Scan Limit
Linear Scan trigger a scan in the horizontal direcon in the predened range.
Before You Start
Make sure the connected IP camera supports the PTZ funcon and is properly connected.
Note
This funcon is supported only by certain models.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click direconal buons to wheel the camera to a locaon, and click Le Limit or Right Limit to
link the locaon to the corresponding limit.
Note
The speed dome linear scans from the le limit to the right limit, and you must set the le limit
on the le side of the right limit. Also, the angle from the le limit to the right limit must be not
greater than 180º.
3.11.9 One-Touch Park
Certain speed dome models can be congured to start a predened park acon (scan, preset,
patrol, etc.) automacally aer a period of inacvity (park me).
Before You Start
Before operang this funcon, make sure the connected camera supports linear scan and is in
HIKVISION protocol.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
Network Video Recorder User Manual
32
2. Click Park (Quick Patrol), Park (Patrol 1), or Park (Preset 1) to acvate the park acon.
Park (Quick Patrol)
The dome starts patrolling from the predened preset 1 to preset 32 in order aer the park
me. Undened presets will be skipped.
Park (Patrol 1)
The dome starts moving according to the predened patrol 1 path aer the park me.
Park (Preset 1)
The dome moves to the predened preset 1 locaon aer the park me.
Note
The park me can be set only via the speed dome conguraon interface. The default value is 5s
by default.
3. Oponal: Click Stop Park (Quick Patrol), Stop Park (Patrol 1), or Stop Park (Preset 1) to
inacvate it.
3.11.10 Auxiliary Funcons
You can operate the auxiliary funcons including light, wiper, 3D posioning, and center on the PTZ
control panel.
Before You Start
Make sure the connected IP camera supports the PTZ funcon, and is properly connected.
Steps
1.
Click on the quick sengs toolbar of the PTZ camera's live view. The PTZ control panel
displays on the right of the interface.
2. Click Aux Funcon.
Figure 3-17 Aux Funcon Conguraon
3. Click the icons to operate the aux funcons. See the table for the icon descripons.
Network Video Recorder User Manual
33
Table 3-4 Descripon of Aux Funcons Icons
Icon Descripon
Light on/o
Wiper on/o
3D posioning
Center
Network Video Recorder User Manual
34
Chapter 4 Recording and Playback
4.1 Recording
4.1.1 Congure Recording Parameters
Go to Camera → Video Parameters .
Main Stream
Main stream refers to the primary stream that aects data recorded to the hard disk drive and will
directly determine your recording quality and image size.
Comparing with the sub-stream, the main stream can provide a higher quality video with higher
resoluon and frame rate.
Frame Rate (FPS - Frames Per Second)
It refers to how many frames are captured each second. A higher frame rate is advantageous
when there is movement in the video stream, as it maintains image quality throughout.
Resoluon
Image resoluon is a measure of how much detail a digital image can hold. The greater the
resoluon, the greater the level of detail. Resoluon can be specied as the number of pixel-
columns (width) by the number of pixel-rows (height), e.g., 1024 × 768.
Bitrate
The bit rate (in kbit/s or Mbit/s) is oen referred to as speed, but actually denes the number of
bits/me unit and not distance/me unit.
Enable H.264+
H.264+ combines intelligent analysis technology with predicve encoding, noise suppression,
and long-term bit rate control to realize a lower bit rate,which plays a signicant role in cung
storage costs and provides a higher return value for the investment.
Enable H.265+
H.265+ is an opmized encoding technology based on the standard H.265/HEVC compression.
With H.265+, the video quality is almost the same as that of H.265/HEVC but with less
transmission bandwidth and storage capacity required.
Note
●
A higher resoluon, frame rate and bit rate seng will provide you the beer video quality, but
it will also require more internet bandwidth and use more storage space on the hard disk drive.
●
H.264+ or H.265+ encoding technology is only available for certain models.
Network Video Recorder User Manual
35
Sub-Stream
Sub-stream is a second codec that runs alongside the main stream. It allows you to reduce the
outgoing internet bandwidth without sacricing your direct recording quality.
Sub-stream is oen exclusively used by apps to view live video. Users with limited internet speeds
may benet most from this seng.
Picture
The picture refers to the live picture capture in connuous or event recording type. ( Storage →
Capture Schedule → Advanced
Picture Quality
Set the picture quality to low, medium or high. The higher picture quality results in more
storage space requirement.
Interval
The interval of capturing live picture.
Capture Delay Time
The duraon of capturing pictures.
Congure Advanced Parameters
Steps
1. Go to Storage → Schedule → Record .
2. Check Enable Schedule to enable scheduled recording.
3. Click Advanced to set the advanced parameters.
Figure 4-1 Advanced Record Sengs
Record Audio
Enable or disable audio recording.
Pre-record
Network Video Recorder User Manual
36
The me you set to record before the scheduled me or event. For example, when an alarm
triggers the recording at 10:00, and if you set the pre-record me as 5 seconds, the camera
records at 9:59:55.
Post-record
The me you set to record aer the event or the scheduled me. For example, when an
alarm triggered recording ends at 11:00, and if you set the post-record me as 5 seconds, it
records ll 11:00:05.
Stream Type
Main stream and sub-stream are selectable for recording. When you select sub-stream, you
can record for a longer me with the same storage space.
Expired Time
The expired me is period for a recorded le to be kept in the HDD. When the deadline is
reached, the le will be deleted. If you set the expired me to 0, the le will not be deleted.
The actual keeping me for the le should be determined by the capacity of the HDD.
Redundant Record/Capture
By enabling redundant record or capture you save the record and captured picture in the
redundant HDD.
4.1.2 Enable H.265 Stream Access
The device can automacally switch to the H.265 stream of IP camera (which supports H.265 video
format) for the inial access.
Go to Camera → More Sengs → H.265 Auto Switch Conguraon to enable the funcon.
4.1.3 ANR
ANR (Automac Network Replenishment) can automacally enable SD card of network camera to
save the video in the condion of network disconnecon, and can synchronize data aer the
network is recovered.
Before You Start
●
Ensure the network connecon between your device and network cameras is valid and correct.
●
Ensure the network camera has been installed with an SD card.
Steps
1. Log in your device via web browser and go to Conguraon → Storage → Schedule Sengs →
Advanced .
2. Check Enable ANR.
3. Click OK.
Network Video Recorder User Manual
37
4.1.4 Manual Recording
You can click to manually start/stop recording videos at live view.
4.1.5 Congure Plan Recording
The camera would automacally start/stop recording according to the congured recording
schedule.
Before You Start
●
Ensure you have installed the HDDs to the device or added the network disks before storing the
video les, pictures and log les.
●
Before enabling Moon, Alarm, M | A (moon or alarm), M & A (moon and alarm) and Event
triggered recording and capture, you must congure the moon detecon sengs, alarm input
sengs and other events as well. Refer to for details.
Steps
1. Go to Storage → Schedule → Record .
2. Select a camera.
3. Check Enable Schedule.
4. Select a recording type.
Connuous
Scheduled recording.
Event
Recording triggered by all event triggered alarm.
Moon
Recording triggered by moon detecon.
Alarm
Recording triggered by alarm.
M/A
Recording triggered by either moon detecon or alarm.
M&A
Recording triggered by moon detecon and alarm.
POS
Recording triggered by POS and alarm.
5. Drag the cursor on me bar to set the record schedule.
Network Video Recorder User Manual
38
Figure 4-2 Record Schedule
Note
●
You can repeat the above steps to set schedule recording or capture for each day in the week.
●
Connuous recording is applied to each day by default.
6. Oponal: Copy the recording schedule to other camera(s).
1) Click Copy to.
2) Select camera(s) to duplicate with the same schedule sengs.
3) Click OK.
7. Click Apply.
4.1.6 Congure Connuous Recording
The device can connuously record the video within the congured me schedule.
Steps
1. Go to Camera → Encoding Parameters → Recording Parameters .
2. Set the connuous main stream/sub-stream recording parameters for the camera.
3. Go to Storage → Recording Schedule .
4. Drag the mouse on the me bar to set the connuous recording schedule. Refer to
Congure
Plan Recording for details.
Network Video Recorder User Manual
39
4.1.7 Congure Moon Detecon Triggered Recording
You can congure the recording triggered by the moon detecon event.
Steps
1. Go to System → Event → Normal Event → Moon Detecon .
2. Congure the moon detecon and select the channel (s) to trigger the recording when moon
event occurs. Refer to Congure Linkage Acons for details.
3. Go to Camera → Encoding Parameters → Recording Parameters .
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage → Recording Schedule .
6. Select the recording type to Moon.
7. Drag the mouse on the me bar to set moon detecon recording schedule. Refer to Congure
Plan Recording for details.
4.1.8 Congure Event Triggered Recording
You can congure the recording triggered by the moon detecon, moon detecon and alarm,
face detecon, vehicle detecon, line crossing detecon, etc.
Steps
1. Go to System → Event .
2. Congure the event detecon and select the channel(s) to trigger the recording when event
occurs. Refer to Event for details.
3. Go to Camera → Encoding Parameters → Recording Parameters .
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage → Recording Schedule .
6. Select the recording type to Event.
7. Drag the mouse on the me bar to set the event detecon recording schedule. Refer to
Congure Plan Recording for details.
4.1.9 Congure Alarm Triggered Recording
You can congure the recording triggered by the moon detecon, face detecon, vehicle
detecon, line crossing detecon, etc.
Steps
1. Go to System → Event → Normal Event → Alarm Input .
2. Congure the alarm input and select the channel(s) to trigger the recording when alarm occurs.
Refer to
Event for details.
3. Go to Camera → Encoding Parameters → Recording Parameters .
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage → Recording Schedule .
6. Select the recording type to Alarm.
Network Video Recorder User Manual
40
7. Drag the mouse on the me bar to set the alarm recording schedule. Refer to Congure Plan
Recording for details.
4.1.10 Congure Picture Capture
The picture refers to the live picture capture in connuous or event recording type. Only certain
models support this funcon.
Steps
1. Go to Camera → Encoding Parameters → Capture .
2. Set the picture parameters.
Resoluon
Set the resoluon of the picture to capture.
Picture Quality
Set the picture quality to low, medium or high. The higher picture quality results in more
storage space requirement.
Interval
The interval of capturing live picture.
3. Go to Storage → Capture Schedule .
4. Select the camera to congure the picture capture.
5. Set the picture capture schedule. Refer to Congure Plan Recording for details.
4.1.11 Congure Holiday Recording
You may want to have dierent plan for recording on holiday, this funcon allows you to set the
recording schedule on holiday for the year.
Steps
1. Go to System → Holiday .
2. Select a holiday item from the list.
3. Click
to edit the selected holiday.
4. Check Enable.
Network Video Recorder User Manual
41
Figure 4-3 Edit Holiday Sengs
5. Set Holiday Name, Mode, Start Date, and End Date.
6. Click OK.
7. Set the schedule for holiday recording. Refer to Congure Plan Recording for details.
4.1.12 Congure Redundant Recording and Capture
Enabling redundant recording and capture, which means saving the record les and captured
pictures not only in the R/W HDD but also in the redundant HDD, will eecvely enhance the data
safety and reliability.
Before You Start
You must set the storage mode to Group before you set the HDD property to Redundancy. For
detailed informaon, refer to Congure HDD Group . There should be at least another HDD which
is in Read/Write status.
Steps
1. Go to Storage → Storage Device .
2. Select a HDD from the list and click to enter the Local HDD Sengs interface.
3. Set the HDD property to Redundancy.
4. Go to Storage → Schedule Sengs → Record Schedule/Capture Schedule .
5. Click Advanced to set the camera recording parameters.
Network Video Recorder User Manual
42
Figure 4-4 Record Parameters
6. Check Redundant Record/Capture.
7. Click OK to save sengs.
4.2 Playback
4.2.1 Instant Playback
Instant playback enables the device to play the recorded video les recorded in the last ve
minutes. If no video is found, it means there is no recording during the last ve minutes.
Aer selecng the camera on Live View, you can move the cursor to the window boom to access
the toolbar, and click to start instant playback.
Network Video Recorder User Manual
43
Figure 4-5 Playback
4.2.2 Play Normal Video
Go to Playback, select date and camera(s), and use the toolbar at the boom to perform playback
operaons. Refer to Playback Operaons . You can click camera(s) to execute simultaneous
playback of mulple camera(s).
Note
256x playing speed is supported.
Figure 4-6 Play Normal Video Interface
Network Video Recorder User Manual
44
4.2.3 Play Smart Searched Video
In smart playback mode, the device can analyze videos that containing moon, line, or intrusion
detecon informaon, and mark them in red.
Go to Playback, click Smart, and then click moon detecon ( ), line crossing detecon ( ), or
intrusion detecon ( ) in the toolbar at the boom to play the video as your desire.
Figure 4-7 Payback by Smart Search
4.2.4 Play Custom Searched Files
You can play video by customized search condions.
Steps
1. Go to Playback.
2. Select camera(s) from the list.
3. Click Custom Search on the le boom.
4. Enter search condions, including Time, File Status, Event Type, etc.
Figure 4-8 Custom Search
Network Video Recorder User Manual
45
5. Click Search.
Figure 4-9 Custom Searched Video Files
6. Select a le and start playing the video on search results interface.
4.2.5 Play Tag Files
Video tag allows you to record informaon, such as people and locaons of a certain me point,
during playback. You can use video tag(s) to search video les and posion me point.
Add Tag Files
Steps
1. Go to Playback.
2. Search and play back the video le(s).
3. Click
to add the tag.
4. Edit the tag informaon.
5. Click OK.
Note
Max. 64 tags can be added to a single video le.
Play Tag Files
Steps
1. Go to Playback.
2. Click Custom Search at the le boom.
3. Enter search condions, including me and tag keyword.
Network Video Recorder User Manual
46
Figure 4-10 Tag Search
4. Click Search.
Figure 4-11 Searched Tag Files
5. Select a tag le, and play the video on the search results interface.
4.2.6 Play by Sub-periods
The video les can be played in mulple sub-periods simultaneously on the screen.
Steps
1. Go to Playback.
2. Click at the lower-le corner.
3. Select a camera.
4. Set the start me and end me for searching video.
5. Select the dierent mul-period at the lower-right corner, e.g., 4-Period.
Note
According to the dened number of split-screens, the video les on the selected date can be
divided into average segments for playback. E.g., if there are video les exisng between 16:00
and 22:00, and the 6-screen display mode is selected, then it can play the video les for 1 hour
on each screen simultaneously.
Network Video Recorder User Manual
47
4.2.7 Play Log Files
Play back record le(s) associated with channels aer searching system logs.
Steps
1. Go to Maintenance → Log Informaon .
2. Click Log Search .
3. Set search me and type and click Search.
Figure 4-12 System Log Search Interface
4. Choose a log with a video le and click to start playing the log le.
4.2.8 Play External Files
You can play les from external storage devices.
Before You Start
Connect the storage device with the video les to your device.
Steps
1. Go to Playback.
2. Click at the lower-le corner.
3. Click , or double-click the le to play it.
Network Video Recorder User Manual
48
4.3 Playback Operaons
4.3.1 Normal/Important/Custom Video
During the playback, you can select the following three modes to play the video.
Normal
Video les from the connuous recording.
Important
Video les from the event and alarm recording triggered recording.
Custom
Video les searched by custom condions.
4.3.2 Set Play Strategy in Important/Custom Mode
When you are in the smart or custom video playback mode, you can set the playing speed
separately for the normal video and the smart/custom video, or you can select to skip the normal
video.
In the Smart/Custom video playback mode, click to set the play strategy.
●
When Do not Play Normal Videos is checked, the device will skip the normal video and play the
smart (moon/line crossing/intrusion) video and the custom (searched video) only in the normal
speed (X1).
●
When Do not Play Normal Videos is unchecked, you can set the play speed for the normal video
the smart/custom video separately. The speed range is from X1 to XMAX.
Note
You can set the speed in the single-channel play mode only.
4.3.3 Edit Video Clips
You can cut and export video clips during playback.
Steps
1. Go to Playback.
2. Click at the boom toolbar.
3. Set the start me and end me. You can click
to set the me period, or set a me segment on
me bar.
4. Click to save the video clip to a storage device.
Network Video Recorder User Manual
49
4.3.4 Switch between Main Stream and Sub-Stream
You can switch between the main stream and the sub-stream during the playback.
Icon Descripon
Play the video in main stream.
Play the video in sub-stream.
Note
The encoding parameters for the main stream and sub-stream can be congured in Storage →
Encoding Parameters .
4.3.5 Thumbnails View
With the thumbnails view on the playback interface, you can conveniently locate the required
video les on the me bar.
In the playback mode, posion the cursor on me bar to get preview thumbnails.
Figure 4-13 Thumbnails View
You can click a thumbnail to enter the full-screen playback.
4.3.6 Fisheye View
The device supports the sheye camera expansion in Live View or playback mode.
Before You Start
●
The sheye expansion view feature is supported only by certain models.
●
The connected camera must support the sheye view.
Steps
1. Start live view, click
to enter the sheye expansion mode.
2. Select the expansion view mode.
Network Video Recorder User Manual
50
Table 4-1 Fisheye View Icon Descripon
Icon Descripon Icon Descripon
180° Panorama ( ) Switch the Live View
image to the 180°
panorama view.
360° Panorama ( ) Switch the Live View
image to the 360°
panorama view.
PTZ Expansion ( ) The PTZ Expansion is
the close-up view of
some dened area in
the sheye view or
panorama expansion.
It supports the
electronic PTZ
funcon, also called e-
PTZ.
Radial Expansion ( ) In radial expansion
mode, the whole
wide-angle view of the
sheye camera is
displayed. This view
mode is called Fisheye
View because it
approximates the
vision of a sh’s
convex eye. The lens
produces curvilinear
images of a large area,
while distorng the
perspecve and
angles of objects in
the image.
4.3.7 POS Informaon Overlay
The device can be connected with the POS machine/server, and receive the transacon message
for overlay on the image during playback.
Note
When the playing speed is higher than 2x, the POS informaon cannot be overlaid on the video.
In the video live or playback mode, click to overlay the POS transacon informaon on the
playback video.
4.3.8 Fast View
Hold the mouse to drag on the me bar to get a fast view of the video les.
In the Video Playback mode, hold and drag the mouse through the playing me bar to fast view
the video les.
Release the mouse at the required me point to enter the full-screen playback.
Network Video Recorder User Manual
51
4.3.9 Digital Zoom
Digital Zoom zooms into the live image in dierent magnicaons (1x to 16x).
Steps
1. Start live view.
2. Click from the toolbar.
3. Move the sliding bar or scroll the mouse wheel to zoom in/out the image to dierent
magnicaons (1x to 16x).
Figure 4-14 Digital Zoom
Network Video Recorder User Manual
52
Chapter 5 Event
5.1 Normal Event Alarm
5.1.1 Congure Moon Detecon Alarms
Moon detecon enables the device to detect the moving objects in the monitored area and
trigger alarms.
Steps
1. Go to System → Event → Normal Event → Moon Detecon .
2. Select a camera.
3. Check Enable.
4. Set the moon detecon area.
Full screen Click to set the full-screen moon detecon for the image.
Customized area Drag on the preview screen to draw the customized moon detecon
area(s).
5. Set Sensivity (0-100). The sensivity allows you to calibrate how readily movement triggers the
alarm. A higher value results in the more readily to triggers moon detecon.
6. Set the arming schedule. Refer to
Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
5.1.2 Congure Video Loss Alarms
Video loss detecon detects video loss of a channel and takes alarm response acon(s).
Steps
1. Go to System → Event → Normal Event → Video Loss .
2. Select a camera.
3. Check Enable.
4. Set the arming schedule. Refer to
Congure Arming Schedule .
5. Set linkage acons. Refer to Congure Linkage Acons .
5.1.3 Congure Video Tampering Alarms
Video tampering detecon triggered an alarm when the camera lens is covered and takes alarm
response acon(s).
Steps
1. Go to System → Event → Normal Event → Video Tampering .
2. Select a camera.
Network Video Recorder User Manual
53
3. Check Enable.
4. Set the video tampering area. Drag on the preview screen to draw the customized video
tampering area.
5. Set Sensivity (0-2). 3 levels are available. The sensivity calibrates how readily movement
triggers the alarm. A higher value more readily triggers the video tampering detecon.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
5.1.4 Congure Sensor Alarms
Set the handling acon of an external sensor alarm.
Steps
1. Go to System → Event → Normal Event → Alarm Input .
2. Select an alarm input item from the list and click .
3. Select the alarm input type.
4. Edit the alarm name.
5. Check Input.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
5.1.5 Congure Excepons Alarms
Excepon events can be congured to take the event hint in the Live View window and trigger
alarm output and linkage acons.
Steps
1. Go to System → Event → Normal Event → Excepon .
2. Oponal: Enable the event hint to display it in the live view window.
1) Check Enable Event Hint.
2) Click
to select the excepon type(s) to take the event hint.
Network Video Recorder User Manual
54
Figure 5-1 Event Hint Sengs
3. Select an excepon type.
Figure 5-2 Excepons Handling
4. Set the linkage acons. Refer to Congure Linkage Acons .
5.2 VCA Event Alarm
The device supports receiving VCA detecons sent by connected IP cameras. Enable and congure
VCA detecon on the IP camera sengs interface rst.
Note
●
VCA detecons must be supported by the connected IP camera.
●
Refer to the network camera user manual for detailed VCA detecon instrucons.
5.2.1 Facial Detecon
The facial detecon detects the face appearing in the scene. Linkage acons can be triggered when
a human face is detected.
Steps
1. Go to System → Event → Smart Event .
2. Click Face Detecon.
Network Video Recorder User Manual
55
Figure 5-3 Facial Detecon
3. Select a camera to congure.
4. Check Enable Face Detecon.
5. Oponal: Check Save VCA Picture to save the captured pictures of face detecon.
6. Set the detecon sensivity. Sensivity range: [1-5]. The higher the value is, the more easily the
face will be detected.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.2 Congure Vehicle Detecon
Vehicle detecon is available for road trac monitoring. In vehicle detecon, a passed vehicle can
be detected, and the picture of its license plate can be captured.
Steps
1. Go to System → Event → Smart Event .
2. Select a camera to congure.
3. Click Vehicle.
Network Video Recorder User Manual
56
Figure 5-4 Vehicle Detecon
4. Check Enable Vehicle Detecon.
5. Oponal: Check Save VCA Picture to save the captured vehicle detecon pictures.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set the linkage acons. Refer to Congure Linkage Acons .
8. Congure rules, including Area Sengs, Picture, Overlay Content, and Blacklist and Whitelist.
Area Sengs
Up to 4 lanes are selectable.
Blacklist and Whitelist
You should rstly export the list le, and then use its format to edit it. Thereaer, import it
back to your device.
9. Click Apply.
Note
Refer to the Network Camera User Manual for detailed instrucons for the vehicle detecon.
5.2.3 Loitering Detecon
Loitering detecon is used to detect whether a target stays within a specied area longer than the
set me and trigger alarm for linked acons.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Loitering Detecon.
Network Video Recorder User Manual
57
Figure 5-5 Loitering Detecon
4. Check Enable Loitering Detecon.
5. Oponal: Check Save VCA Picture to save the captured loitering detecon pictures.
6. Set loitering detecon parameters.
1) Select Arming Area.
Note
Up to 4 areas are selectable.
2) Set Time Threshold.
Time Threshold
The me of the target staying in the region. If the value is 10, an alarm is triggered aer
the target has stayed in the region for 10 s. Range: [1-10].
3) Set Sensivity.
Sensivity
Similarity of the background image to the object. The higher the value is, more easily the
detecon alarm will be triggered.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.4 People Gathering Detecon
People gathering detecon is used to detect whether the density of human bodies within a
specied area exceeds the set value and trigger alarm for linked acons.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
Network Video Recorder User Manual
58
2. Select a camera.
3. Click People Gathering.
Figure 5-6 People Gathering Detecon
4. Check Enable People Gathering Detecon.
5. Oponal: Check Save VCA Picture to save the captured people gathering detecon pictures.
6. Set people gathering detecon parameters.
1) Select Arming Area.
Note
Up to 4 areas are selectable.
2) Click Draw Area to draw a quadrilateral in the preview window by specifying four verces of
the area.
3) Set Percentage.
Percentage
The density of human bodies within the area. If it exceeds the threshold value, the device
will trigger alarm.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.5 Fast Moving Detecon
Fast moving detecon is used to detect suspicious running and chasing, over-speed, and fast
moving. It will trigger alarm when an object is moving fast and send nocaon to arming host so
that necessary acons can be taken in advance.
Network Video Recorder User Manual
59
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Fast Moving.
Figure 5-7 Fast Moving Detecon
4. Check Enable Fast Moving.
5. Oponal: Check Save VCA Picture to save the captured fast moving detecon pictures.
6. Set fast moving detecon parameters.
1) Select Arming Region. Up to 4 regions are selectable.
2) Click Draw Area to draw a quadrilateral in the preview window by specifying four verces of
the area.
3) Set Sensivity.
Sensivity
Similarity of the background image to the object. The higher the value is, more easily the
detecon alarm will be triggered.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.6 Parking Detecon
Parking detecon is used to detect parking violaon in the area, applicable in expressway and one-
way street.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
Network Video Recorder User Manual
60
3. Click Parking.
Figure 5-8 Parking Detecon
4. Check Enable Parking Detecon.
5. Oponal: Check Save VCA Picture to save the captured parking detecon pictures.
6. Set parking detecon parameters.
1) Select Arming Area.
Note
Up to 4 areas are selectable.
2) Set Time Threshold.
Time Threshold
The me of a vehicle staying in the region. If the value is 10, an alarm will be triggered aer
the vehicle has stayed in the region for 10 s. Range: [5-20].
3) Set Sensivity.
Sensivity
Similarity of the background image to the object. The higher the value is, more easily the
detecon alarm will be triggered.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.7 Unaended Baggage Detecon
Unaended baggage detecon detects the objects le over in a predened region such as the
baggage, purses, dangerous materials, etc., and a series of acons can be taken when the alarm is
triggered.
Network Video Recorder User Manual
61
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Unaended Baggage.
Figure 5-9 Unaended Baggage Detecon
4. Check Enable Unaended Baggage Detecon.
5. Oponal: Check Save VCA Picture to save the captured unaended baggage detecon pictures.
6. Set the detecon rules and detecon areas.
1) Select Arming Area.
Note
Up to 4 areas are selectable.
2) Drag the sliders to set Time Threshold and Sensivity.
Time Threshold
The me of the objects le in the region. If the value is 10, an alarm will be triggered aer
the object is le and stayed in the region for 10 s. Range: [5-20].
Sensivity
Similarity of the background image to the object. The higher the value is, more easily the
detecon alarm will be triggered.
3) Click Draw Region and draw a quadrilateral in the preview window.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
Network Video Recorder User Manual
62
5.2.8 Object Removal Detecon
The object removal detecon funcon detects the objects removed from a predened region, such
as the exhibits on display, and a series of acons can be taken when the alarm is triggered.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Object Removable.
Figure 5-10 Object Removal Detecon
4. Check Enable Object Removable Detecon.
5. Oponal: Check Save VCA Picture to save the captured object removable detecon pictures.
6. Follow these steps to set the detecon rules and detecon areas.
1) Select Arming Area.
Note
Up to 4 areas are selectable.
2) Drag the sliders to set Time Threshold and Sensivity.
Time Threshold
The me of the objects removed from the region. If the value is 10, alarm will be triggered
aer the object disappears from the region for 10 s. Range [5-20].
Sensivity
The similarity degree of the background image. If the sensivity is high, a very small object
taken from the region will trigger the alarm.
3) Click Draw Area and draw a quadrilateral in the preview window by specifying four verces of
the detecon region.
7. Set the arming schedule. Refer to Congure Arming Schedule .
Network Video Recorder User Manual
63
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.9 Audio Excepon Detecon
Audio excepon detecon detects abnormal sounds in the scene, such as a sudden increase/
decrease in sound intensity.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Audio Excepon.
Figure 5-11 Audio Excepon Detecon
4. Oponal: Check Save VCA Picture to save the captured audio excepon detecon pictures.
5. Set the detecon rules.
1) Select Excepon Detecon.
2) Check Audio Loss Excepon, Sudden Increase of Sound Intensity Detecon, and/or Sudden
Decrease of Sound Intensity Detecon.
Audio Loss Excepon
Detects a steep sound rise in the scene. Set Sensivity and Sound Intensity Threshold for
the steep sound rise.
Sensivity
The smaller the value is, the more severely the change would trigger the detecon. Range
[1-100].
Sound Intensity Threshold
It can lter the sound in the environment. The louder the environment sound is, the higher
the value should be. Adjust it according to the environment. Range [1-100].
Sudden Decrease of Sound Intensity Detecon
Network Video Recorder User Manual
64
Detects a steep sound drop in the scene. Detecon sensivity [1-100].
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set the linkage acons. Refer to Congure Linkage Acons .
8. Click Apply.
5.2.10 Defocus Detecon
Image blur caused by lens defocus can be detected.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Defocus.
Figure 5-12 Defocus Detecon
4. Check Enable.
5. Oponal: Check Save VCA Picture to save the captured defocus detecon pictures.
6. Set the detecon sensivity.
Sensivity
Sensivity range: [1-100]. The higher the value is, the more easily the defocus image will be
detected.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
Network Video Recorder User Manual
65
5.2.11 Sudden Scene Change Detecon
Scene change detecon detects the change of the video security environment aected by external
factors, such as the intenonal rotaon of the camera.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Sudden Scene Change.
Figure 5-13 Sudden Scene Change
4. Check Enable.
5. Oponal: Check Save VCA Picture to save the captured sudden scene change detecon pictures.
6. Set the detecon sensivity.
Sensivity
Ranges from 1 to 100, the higher the value, the more easily the change of scene can trigger
the alarm.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.12 PIR Alarm
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector vision eld.
The heat energy dissipated by a person or any other warm blooded creature such as dogs, cats,
etc., can be detected.
Network Video Recorder User Manual
66
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click PIR Alarm.
Figure 5-14 PIR Alarm
4. Check PIR Alarm.
5. Oponal: Check Save VCA Picture to save the captured of PIR alarm pictures.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set the linkage acons. Refer to Congure Linkage Acons .
8. Click Apply.
5.2.13 Thermal Camera Detecon
The NVR supports the event detecon modes of the thermal network cameras: re and smoke
detecon, temperature detecon, temperature dierence detecon, etc.
Before You Start
Add the thermal network camera to your device and make sure the camera is acvated.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a thermal camera.
3. Oponal: Check Save VCA Picture to save the captured pictures of detecon.
4. Select an event detecon (Temperature Measurement Alarm, etc.).
5. Set the arming schedule. Refer to
Congure Arming Schedule .
6. Set the linkage acons. Refer to Congure Linkage Acons .
7. Click Apply.
Network Video Recorder User Manual
67
5.2.14 Queue Management
Aer connecng with queue management camera, you can set the arming schedule and linkage
acon of queue management.
Before You Start
Ensure the recorder have connected with queue management camera.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a queue management camera.
3. Oponal: Check Save VCA Picture to save the captured pictures of detecon.
4. Set the arming schedule. Refer to Chapter Congure Arming Schedule for details.
5. Set the linkage acons. Refer to Chapter Congure Linkage Acons for details.
6. Click Apply.
5.3 Congure Arming Schedule
Steps
1. Click Arming Schedule.
2. Click Edit.
3. Select a day of the week and set the me period. Up to eight me periods can be set each day.
Note
Time periods cannot repeat or overlapped.
Network Video Recorder User Manual
68
Figure 5-15 Set Arming Schedule
4. You can click Copy to copy the current day arming schedule sengs to other day(s).
5. Click Apply to save the sengs.
5.4 Congure Linkage Acons
Alarm linkage acons will be acvated when an alarm or excepon occurs.
5.4.1 Congure Auto-Switch Full Screen Monitoring
When an alarm is triggered, the local monitor displays in full screen the video image from the
alarming channel congured for full screen monitoring. And when the alarm is triggered
simultaneously in several channels, you must congure the auto-switch dwell me.
Note
Auto-switch will terminate once the alarm stops and back to the live view interface.
Steps
1. Go to System → Live View → General .
2. Set the event output and dwell me.
Event Output
Network Video Recorder User Manual
69
Select the output to show the event video.
Full Screen Monitoring Dwell Time
Set the me in seconds to show the alarm event screen. If alarms are triggered
simultaneously in several channels, their full-screen images will be switched at an interval of
10 seconds (default dwell me).
3. Go to the Linkage Acon interface of the alarm detecon (e.g., moon detecon, video
tampering, face detecon, etc.).
4. Select the Full Screen Monitoring alarm linkage acon.
5. Select the channel(s) in Trigger Channel for full screen monitoring.
5.4.2 Congure Audio Warning
The audio warning has the system to trigger an audible beep when an alarm is detected.
Steps
1. Go to System → View → General .
2. Enable the audio output and set the volume.
3. Go to Linkage Acon interface of the alarm detecon (e.g., moon detecon, video tampering,
face detecon, etc.).
4. Select the Audio Warning alarm linkage acon.
5.4.3 Nofy Surveillance Center
The device can send an excepon or alarm signal to the remote alarm host when an event occurs.
The alarm host refers to the PC installed with client soware (e.g., iVMS-4200, iVMS-5200).
Steps
1. Go to System → Network → Advanced → More Sengs .
2. Set the alarm host IP and alarm host port.
3. Go to Linkage Acon interface of the alarm detecon (e.g., moon detecon, video tampering,
face detecon, etc.).
4. Select Nofy Surveillance Center.
5.4.4 Congure Email Linkage
The system can send an email with alarm informaon to a user or users when an alarm is detected.
Steps
1. Go to System → Network → Advanced → Email .
2. Set the email parameters.
3. Click Apply.
4. Go to the Linkage Acon interface of the alarm detecon (e.g., moon detecon, video
tampering, face detecon, etc.).
Network Video Recorder User Manual
70
5. Select Send Email alarm linkage acon.
5.4.5 Trigger Alarm Output
The alarm output can be triggered by the alarm input, moon detecon, video tampering
detecon, face detecon, line crossing detecon, and any all other events.
Steps
1. Go to Linkage Acon of the alarm detecon (e.g., moon detecon, face detecon, line crossing
detecon, intrusion detecon, etc.).
2. In Trigger Alarm Outputs, select the alarm output(s) to trigger.
3. Go to System → Event → Normal Event → Alarm Output .
4. Select an alarm output item from the list.
5.4.6 Congure PTZ Linkage
The system can trigger the PTZ acons (e.g., call preset/patrol/paern) when the alarm event, or
VCA detecon events occurs.
Before You Start
Make sure the connected PTZ or speed dome connected supports PTZ linkage.
Steps
1. Go to Linkage Acon interface of the alarm input or VCA detecon (e.g., face detecon, line
crossing detecon, intrusion detecon, etc.).
2. Select the PTZ Linkage.
3. Select the camera to perform the PTZ acons.
4. Select the preset/patrol/paern No. to call when the alarm events occur.
Note
You can set only one PTZ type for the linkage acon each me.
Network Video Recorder User Manual
71
Chapter 6 Smart Analysis
6.1 Engine Conguraon
Each engine processes a specied VCA type as its working mode. You can congure the engine
working mode as your desire.
Steps
1. Go to Smart Analysis → Engine Sengs → Engine Conguraon .
2. Congure each engine usage. You can view the engine temperature and linked channel status of
each funcon.
Note
If the engine has been bound with channel(s), switching engine working mode will unbind the
engine and channel(s), and cancel the related smart event of the channel.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Click Save to save the sengs.
6.2 Work Event Detecon
Work event detecon includes absence/sleep on duty detecon, people overstay detecon,
number of people excepon detecon, and using mobile phone detecon. You can congure event
detecon via web browser.
6.2.1 Absence/Sleep on Duty Detecon
Absence detecon detects people who leave duty area over the set me in detecon area. Sleep
on duty detecon detects whether people stay moonless on duty. If the person has not moved
during the set me, the device will predicate the person is sleeping.
Before You Start
Ensure the engine mode is set as Work Event Detecon. You can go to Conguraon → System →
VCA Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → Event Detecon .
Network Video Recorder User Manual
72
2. Select a camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable Local VCA Event Detecon.
Enable Local VCA Event Detecon
The device will analyze the video, cameras only transmit video stream.
5. Set rules and detecon areas.
1) Click to add a rule.
2) Select Rule Type as Absence Detecon.
3) Select Mode as Absence Detecon or Sleep On Duty Detecon according to your
requirement.
4) Enter the rule name.
5) Enable the rule.
6) Set Person Mode.
Single Person Mode
Only one person is on duty. It will trigger an alarm when the person is absence or sleeping
(moonless).
Two-Person Mode
Two people are on duty. It will trigger an alarm when both of them are absence or sleeping
(moonless).
7) Set Asleep Period/Absence Duraon.
Asleep Period/Absence Duraon
The device will trigger an alarm when the me exceeds the limit.
8) Oponal: Check Overlay Rule Frame or Overlay Target Frame.
Overlay Rule Frame
The rule frame will be displayed on the captured picture.
Overlay Target Frame
The target frame will be displayed on the captured picture.
9) Click to draw the detecon area in the preview window.
10)Click Save.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
8. Click Save.
What to do next
You can check
to view the live detecon result via GUI. Refer to Target Detecon for details.
Network Video Recorder User Manual
73
6.2.2 Staying Overme Detecon
Staying overme detecon can trigger alarm when overstay me of the target is beyond the set
value in the detecon area.
Before You Start
Ensure the engine mode is set as Work Event Detecon. You can go to Conguraon → System →
VCA Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → Event Detecon .
2. Select a camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable Local VCA Event Detecon.
Enable Local VCA Event Detecon
The device will analyze the video, cameras only transmit video stream.
5. Set rules and detecon areas.
1) Click to add a rule.
2) Select Rule Type as Staying Overme Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set Mode.
Arbitrary Mode
When there are people staying in the detecon area among the leaving crowd, the device
will trigger an alarm.
Single Person Mode
When there is only one person staying in the detecon area among the leaving crowd, the
device will trigger an alarm.
6) Set Duraon.
Duraon
The device will trigger an alarm when the me exceeds the limit.
7) Oponal: Check Overlay Rule Frame or Overlay Target Frame.
Overlay Rule Frame
The rule frame will be displayed on the captured picture.
Overlay Target Frame
Network Video Recorder User Manual
74
The target frame will be displayed on the captured picture.
8) Click to draw the detecon area in the preview window.
9) Click Save.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
8. Click Save.
What to do next
You can check to view the live detecon result via GUI. Refer to Target Detecon for details.
6.2.3 Number of People Excepon Detecon
Number of people excepon detecon counts the amount of people in the detecon area, when
the number reaches the threshold, it will trigger an alarm.
Before You Start
Ensure the engine mode is set as Work Event Detecon. You can go to Conguraon → System →
VCA Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → Event Detecon .
2. Select a camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable Local VCA Event Detecon.
Enable Local VCA Event Detecon
The device will analyze the video, cameras only transmit video stream.
5. Set rules and detecon areas.
1) Click to add a rule.
2) Select Rule Type as Number of People Excepon Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set Duraon.
Duraon
The device will trigger an alarm when the me exceeds the limit.
6) Oponal: Check Overlay Rule Frame.
Overlay Rule Frame
The rule frame will be displayed on the captured picture.
Network Video Recorder User Manual
75
7) Set Mode.
8) Click to draw the detecon area in the preview window.
9) Click Save.
Figure 6-1 Number of People Excepon Detecon
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
8. Click Save.
What to do next
You can check to view the live detecon result via GUI. Refer to Target Detecon for details.
6.2.4 Playing Mobile Phone Detecon
Playing mobile phone detecon detects whether the person in the detecon is using mobile
phone.
Network Video Recorder User Manual
76
Before You Start
Ensure the engine mode is set as Work Event Detecon. You can go to Conguraon → System →
VCA Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → Event Detecon .
2. Select a camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable Local VCA Event Detecon.
Enable Local VCA Event Detecon
The device will analyze the video, cameras only transmit video stream.
5. Set rules and detecon areas.
1) Click to add a rule.
2) Select Rule Type as Playing Mobile Phone Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set Duraon.
Duraon
The device will trigger an alarm when the me exceeds the limit.
6) Oponal: Check Overlay Rule Frame or Overlay Target Frame.
Overlay Rule Frame
The rule frame will be displayed on the captured picture.
Overlay Target Frame
The target frame will be displayed on the captured picture.
7) Click to draw the detecon area in the preview window.
8) Click Save.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
8. Click Save.
What to do next
You can check to view the live detecon result via GUI. Refer to Target Detecon for details.
Network Video Recorder User Manual
77
6.3 Street Event Detecon
Street event detecon includes people gathering detecon, people running detecon, violent
moon detecon, and people falling down detecon. You can congure event detecon via web
browser.
6.3.1 People Gathering Detecon
People gathering detecon is used to detect whether the density of people within a specied area
exceeds the set value.
Before You Start
Ensure the engine mode is set as Street Event Detecon. You can go to Conguraon → System →
VCA Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → Event Detecon .
2. Select a camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable Local VCA Event Detecon.
Enable Local VCA Event Detecon
The device will analyze the video, cameras only transmit video stream.
5. Set rules and detecon areas.
1) Click
to add a rule.
2) Select Rule Type as People Gathering.
3) Enter the rule name.
4) Enable the rule.
5) Set Duraon.
Duraon
The device will trigger an alarm when the me exceeds the limit.
6) Set Sensivity.
Sensivity
The higher the sensivity is, the easier the alarm will be triggered.
7) Set Alarm Interval.
Alarm Interval
Network Video Recorder User Manual
78
Alarm interval is the shortest me interval between two alarms.
8) Oponal: Check Overlay Rule Frame or Overlay Target Frame.
Overlay Rule Frame
The rule frame will be displayed on the captured picture.
Overlay Target Frame
The target frame will be displayed on the captured picture.
9) Set Number of People Threshold.
Number of People Threshold
When the number of people in the detecon area exceeds the threshold, it will trigger an
alarm.
10)Click to draw the detecon area in the preview window.
11)Click Save.
Figure 6-2 People Gathering Detecon
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
8. Click Save.
Network Video Recorder User Manual
79
What to do next
You can check to view the live detecon result via GUI. Refer to Target Detecon for details.
6.3.2 People Running Detecon
People running detecon detects the moving speed of people. When people are moving at a high
speed, the device will consider people are running, and trigger an alarm.
Before You Start
Ensure the engine mode is set as Street Event Detecon. You can go to Conguraon → System →
VCA Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → Event Detecon .
2. Select a camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable Local VCA Event Detecon.
Enable Local VCA Event Detecon
The device will analyze the video, cameras only transmit video stream.
5. Set rules and detecon areas.
1) Click to add a rule.
2) Select Rule Type as People Running Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set Duraon.
Duraon
The device will trigger an alarm when the me exceeds the limit.
6) Set Mode.
Mulple Persons Mode
When mulple persons are running in the detecon area, the device will trigger an alarm.
Single Person Mode
When a single person is running in the detecon area, the device will trigger an alarm.
7) Set Sensivity.
Sensivity
The higher the sensivity is, the easier the alarm will be triggered.
8) Oponal: Check Overlay Rule Frame or Overlay Target Frame.
Network Video Recorder User Manual
80
Overlay Rule Frame
The rule frame will be displayed on the captured picture.
Overlay Target Frame
The target frame will be displayed on the captured picture.
9) Click to draw the detecon area in the preview window.
10)Click Save.
Figure 6-3 People Running Detecon
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
8. Click Save.
What to do next
You can check to view the live detecon result via GUI. Refer to Target Detecon for details.
Network Video Recorder User Manual
81
6.3.3 Physical Conict Detecon
Physical conict detecon alarm will be triggered when the movement degree exceeds the set
value in the detecon area.
Before You Start
Ensure the engine mode is set as Work Event Detecon. You can go to Conguraon → System →
VCA Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → Event Detecon .
2. Select a camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable Local VCA Event Detecon.
Enable Local VCA Event Detecon
The device will analyze the video, cameras only transmit video stream.
5. Set rules and detecon areas.
1) Click to add a rule.
2) Select Rule Type as Physical Conict Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set Duraon.
Duraon
The device will trigger an alarm when the me exceeds the limit.
6) Set Sensivity.
Sensivity
The higher the sensivity is, the easier the alarm will be triggered.
7) Set Alarm Interval.
Alarm Interval
Alarm interval is the shortest me interval between two alarms.
8) Oponal: Check Overlay Rule Frame or Overlay Target Frame.
Overlay Rule Frame
The rule frame will be displayed on the captured picture.
Overlay Target Frame
The target frame will be displayed on the captured picture.
Network Video Recorder User Manual
82
9) Click to draw the detecon area in the preview window.
10)Click Save.
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
8. Click Save.
What to do next
You can check to view the live detecon result via GUI. Refer to Target Detecon for details.
6.3.4 People Falling Down Detecon
People falling down detecon detects whether people are falling down. When height of people is
lower than the threshold, it will trigger an alarm.
Before You Start
Ensure the engine mode is set as Street Event Detecon. You can go to Conguraon → System →
VCA Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → Event Detecon .
2. Select a camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable Local VCA Event Detecon.
Enable Local VCA Event Detecon
The device will analyze the video, cameras only transmit video stream.
5. Set rules and detecon areas.
1) Click to add a rule.
2) Select Rule Type as People Falling Down Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set Sensivity.
Sensivity
The higher the sensivity is, the easier the alarm will be triggered.
6) Oponal: Check Overlay Rule Frame or Overlay Target Frame.
Overlay Rule Frame
The rule frame will be displayed on the captured picture.
Overlay Target Frame
Network Video Recorder User Manual
83
The target frame will be displayed on the captured picture.
7) Click to draw the detecon area in the preview window.
8) Click Save.
Figure 6-4 People Falling Down Detecon
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
8. Click Save.
What to do next
You can check to view the live detecon result via GUI. Refer to Target Detecon for details.
6.4 Hard Hat Detecon
Hard hat detecon detects people who are wearing hard hats or not. For the people who are not
wearing hard hats, you can link face picture library to the detecon to recognize these people and
know their names. You can congure hard hat detecon via web browser.
Network Video Recorder User Manual
84
Before You Start
Ensure the engine mode is set as Hard Hat Detecon. You can go to Conguraon → System →
VCA Conguraon to congure the engine mode.
Steps
Note
●
The camera installaon lt angle is recommended to be 20° to 60°.
●
When people are standing straightly in the image, the length of people should be larger than
25% of the total image length.
●
There should not be too many people in the detecon area.
1. Go to Conguraon → VCA → Hard Hat Detecon .
2. Select a camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable Without Hard Hat Detecon or Hard Hat Detecon as your desire.
Note
The device will analyze the video, cameras only transmit video stream.
5. Oponal: Check Overlay Rule Frame or Overlay Target Frame.
Overlay Rule Frame
The rule frame will be displayed on the captured picture.
Overlay Target Frame
The target frame will be displayed on the captured picture.
6. Set the detecon area.
1) Set Region. You can select a region number for the detecon area.
2) Click Draw Area to draw the detecon area in the preview window.
3) Click Stop Drawing.
4) Click Save.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set linkage acons. Refer to Congure Linkage Acons . If you requires to recognize the people
who are not wearing hard hat, check Face Recognion.
9. If you have enabled Face Recognion in Linkage Method, you shall set the face picture library
and face grading parameters.
1) Select the face picture libraries and set the similarity for each face picture library. If the
similarity of face picture exceeds the value, it will trigger an alarm.
Network Video Recorder User Manual
85
2) Check Enable to set face grading parameters. Face grading is used for face picture selecon. It
only uses face pictures which sasfy grading requirement for analysis. The larger the pupil
distance is, and the smaller the lt and pan angles are, the beer the analysis eect will be.
Condence Interval of Facial Feature
The face grading score of each face picture quality level. You can set the score of high,
medium, and low rang pictures.
Pupil Distance
Pupil distance is the distance between two pupils.
Elevaon Angle
Tilt angle is the angle between your view and horizontal plane.
Pan Angle
Pan angle is the angle between your view and vercal plane.
10. Click Save.
What to do next
a. You can check to view the live detecon results via GUI. Refer to Target Detecon for details.
b. You can click in to detailed results via GUI. Refer to Not Wearing Hard Hat Detecon for
details.
6.5 Face Picture Library Management
Face picture library is mainly used for face picture storage and face picture comparison.
6.5.1 Add a Face Picture Library
Steps
1. Go to Smart Analysis → Face Picture Database .
2. Click
.
3. Enter the face picture library name.
4. Click OK.
Note
You can click or to edit the library name or delete the library.
6.5.2 Upload Face Pictures to the Library
Face picture comparison is based on face pictures in the library. You can upload a single face
picture or import mulple face pictures to the library.
Network Video Recorder User Manual
86
Before You Start
●
Ensure the picture format is JPEG or JPG.
●
For each picture, ensure it only has one face.
●
Import all pictures to a backup device in advance.
Steps
1. Select a face picture library in the list.
2. Click Add or Import Face Picture Library.
3. Import picture(s).
-
Add: Select a picture to import and click Import.
-
Import Face Picture Library: Select mulple pictures to import and click Import.
4. Oponal: Select pictures and click Copy to to copy the uploaded pictures of the current library
to other library.
5. Oponal: Select a picture and click Edit to modify the picture informaon.
6. Oponal: Select a picture from the list and click Delete to delete the picture.
7. Oponal: Select a library and click Export Face Picture Library to export library to backup device.
8. Oponal: Click
or to view by gure or list.
6.6 People Counng
People counng stascs and regional people counng of the IP camera video stream are
available, and you can congure them via web browser.
6.6.1 People Counng Stascs
The device can analyze the people counng stascs of the rule area, generate people counng
stascs report, and upload the alarm informaon to the plaorm or the client server center.
Before You Start
Ensure the engine mode is set as People Counng. You can go to Conguraon → System → VCA
Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → People Counng → People Counng Stascs via web browser.
2. Select an IP camera.
3. Select an analysis mode.
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable People Counng.
5. Click Rule.
Network Video Recorder User Manual
87
Table 6-1 Rule Drawing Instrucon
Icon Descripon
Draw a detecon line.
Draw the rule area:
●
Le click the screen to draw a polygon. A point will be xed and a
line can be drawn accordingly. Right click to stop drawing. You can
adjust the shape of polygon aer drawing.
●
One rule area is supported.
●
Polygon area supports 3 to 10 lines.
●
Please draw convex polygon. Concave polygon is not available.
Change the direcon that should be detected. This direcon
indicates the direcon of crowds crossing detecon line.
Delete the detecon line and area.
Note
The people counng stascs provided by the device is the stascs of people who cross the
detecon line and within the rule area in the recording or video stream.
6. Set Alarm Upload Interval.
Alarm Upload Interval
Alarm interval is the shortest me interval between two alarms.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set linkage acons. Refer to Congure Linkage Acons .
9. Click Save.
What to do next
You can view people counng stascs report via local device GUI. Refer to View People Counng
Stascs .
6.6.2 Regional People Counng
You can analyze the number of people threshold within the rule area and trigger the alarm.
Before You Start
Ensure the engine mode is set as People Counng. You can go to Conguraon → System → VCA
Conguraon to congure the engine mode.
Steps
1. Go to Conguraon → VCA → People Counng → Regional People Counng .
2. Select a camera.
3. Select an analysis mode.
Network Video Recorder User Manual
88
Real Time
Provide real-me intelligent analysis for the video stream of the IP camera(s).
Auto-Switch
Provide sequenal intelligent analysis for the video stream of the IP camera. (Once one IP
camera only).
4. Check Enable.
5. Click Rule.
6. Set rules and detecon areas.
1) Click to add rule.
2) Congure Number of People Threshold and Mode.
3) Draw detecon areas.
Table 6-2 Area Drawing Instrucon
Icon Descripon
Draw the rule area:
●
Le click the screen to draw a polygon. A point will be xed and
a line can be drawn accordingly. Right click to stop drawing. You
can adjust the shape of polygon aer drawing.
●
One rule area is supported.
●
Polygon area supports 3 to 10 lines.
●
Please draw convex polygon. Concave polygon is not available.
Delete the detecon line and area.
Note
When the device detects that the number of people in the recording or video stream within
the rule area exceeds Number of People Threshold and Mode, the alarm will be triggered.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set linkage acons. Refer to Congure Linkage Acons .
9. Click Save.
6.7 Smart Search
6.7.1 Face Picture Search
Search by Event
Search face picture by face picture comparison results.
Steps
1. Go to Smart Analysis → Smart Search → Face Search → Search by Event .
Network Video Recorder User Manual
89
Figure 6-5 Search by Event
2. Set the start me and end me.
3. Select a channel.
4. Click Start Search. The search result list displays 1 channel.
5. Click Channel to select a channel as your desire. It will display search results for the selected
channel.
What to do next
Refer to View Searching Result .
Search by Personal Name
Search face picture by personal name.
Steps
1. Go to Smart Analysis → Smart Search → Face Search → Search by Name .
Network Video Recorder User Manual
90
Figure 6-6 Search by Personal Name
2. Set the start me and end me of the face pictures to search.
3. Select a channel.
4. Enter a name.
5. Click Start Search. The search result list displays 1 channel.
6. Click Channel to select a channel as your desire. It will display search results for the selected
channel.
What to do next
Refer to
View Searching Result .
Search by Uploaded Picture
You can search the face pictures by uploaded picture.
Steps
1. Go to Smart Analysis → Smart Search → Face Search → Search by Picture .
Network Video Recorder User Manual
91
Figure 6-7 Search by Uploaded Picture
2. Select a channel.
3. Select face pictures for search.
-
Click Upload Sample from Local and select face pictures from your local directory.
-
Click Upload Sample from Face Picture Database and select face pictures from created face
picture libraries.
4. Set the start me and end me.
5. Set the Similarity value (range: 0 to 100). Device will analyze the similarity between samples and
face pictures in library and show pictures the similarity of which are higher than the set one.
6. Click Start Search. The search result list displays 1 channel.
7. Click Channel to select a channel as your desire. It will display search results for the selected
channel.
What to do next
Refer to
View Searching Result .
View Searching Result
●
Double click a le to view the related video.
●
Click Add to Face Database to add the selected le(s) to a face picture library.
●
Click Add to Sample to add the select le(s) as sample picture(s). You can use the sample
picture(s) to search other pictures. Refer to
Search by Uploaded Picture .
●
Click Export to export the selected le(s) to a backup device. You can click Select All to select all
les.
Network Video Recorder User Manual
92
Note
●
You can click to view export progress.
●
You can click to return to search interface.
6.7.2 Event Detecon Search
You can search work event detecon and street event detecon, including absence/sleep on duty
detecon, people overstay detecon, number of people excepon detecon, using mobile phone
detecon, people gathering detecon, people running detecon, violent moon detecon, and
people falling down detecon.
Steps
1. Go to Smart Analysis → Smart Search → Event Detecon → Search by Event .
Figure 6-8 Event Detecon Search
2. Specify search condions.
3. Click Start Search. The search result list displays 1 channel.
4. Click Channel to select a channel as your desire. It will display search results for the selected
channel.
5. Oponal: Export search results.
1) Select result le(s) from the search result interface, or check Select All to select all les.
2) Click Export to export the selected le(s) to a backup device.
Network Video Recorder User Manual
93
Note
●
You can click to view export progress.
●
You can click to return to search interface.
6.7.3 Not Wearing Hard Hat Search
You can search not wearing hard hat event according to manually specied search condions.
Steps
1. Go to Smart Analysis → Smart Search → Not Wearing Hard Hat → Search by Event .
Figure 6-9 Not Wearing Hard Hat Search
2. Specify search condions.
3. Click Start Search. The search result list displays 1 channel.
4. Click Channel to select a channel as your desire. It will display search results for the selected
channel.
5. Oponal: Export search results.
1) Select result le(s) from the search result interface, or check Select All to select all les.
2) Click Export to export the selected le(s) to a backup device.
Note
●
You can click to view export progress.
●
You can click to return to search interface.
Network Video Recorder User Manual
94
6.7.4 Regional People Counng Search
Based on picture search of regional people counng, this funcon provides recording le 5 seconds
before or aer the picture searched.
Steps
1. Go to Smart Analysis → Smart Search → Regional People Counng .
2. Set regional people counng searching parameters.
3. Click Start Search. The search result list displays 1 channel.
4. Click Channel to select a channel as your desire. It will display search results for the selected
channel.
5. Oponal: Export search results.
1) Select result le(s) from the search result interface, or check Select All to select all les.
2) Click Export to export the selected le(s) to a backup device.
Note
●
You can click to view export progress.
●
You can click to return to search interface.
6.7.5 Human Body Detecon Search
Search human body pictures according to manually specied search condions.
Steps
1. Go to Smart Analysis → Smart Search → Human Body Detecon → Search by Appearance .
Network Video Recorder User Manual
95
Figure 6-10 Human Body Detecon Search
2. Specify search condions.
3. Click Start Search. The search result list displays 1 channel.
4. Click Channel to select a channel as your desire. It will display search results for the selected
channel.
5. Oponal: Export search results.
1) Select result le(s) from the search result interface, or check Select All to select all les.
2) Click Export to export the selected le(s) to a backup device.
Note
●
You can click to view export progress.
●
You can click to return to search interface.
6.7.6 Vehicle Search
You can search and view the matched vehicle pictures.
Steps
1. Go to Smart Analysis → Smart Search → Vehicle Search .
2. Select the IP camera for the vehicle search.
3. Set search condions.
Network Video Recorder User Manual
96
Figure 6-11 Vehicle Search
4. Click Start Search. The search result list displays 1 channel.
5. Click Channel to select a channel as your desire. It will display search results for the selected
channel.
6. Export search results.
1) Select result le(s) from the search result interface, or check Select All to select all les.
2) Click Export to export the selected le(s) to a backup device.
Note
You can click to view export progress.
6.8 Smart Report
6.8.1 View People Counng Stascs
People counng stascs calculates the number of people entering or leaving a certain congured
area and creates daily/weekly/monthly/annual reports for analysis.
Steps
1. Go to Smart Analysis → Smart Report → Counng via local device GUI.
2. Select a camera.
3. Select the report type.
4. Set Date to analyze. The people counng graphic will show.
Figure 6-12 People Counng Interface
5. Oponal: Click Export to export the report in Microso Excel format.
Network Video Recorder User Manual
97
6.8.2 Heat Map
Heat map is a graphical representaon of data. The heat map funcon is used to analyze how
many people visited and stayed in a specic area.
Before You Start
The funcon must be supported by the connected IP camera and the corresponding parameters
must be set.
Steps
1. Go to Smart Analysis → Smart Report → Heat Map .
2. Select a camera.
3. Select the report type.
4. Set Date to analyze.
Figure 6-13 Heat Map
5. Click Counng.
Note
As shown in the gure above, red color block (255, 0, 0) indicates the most tracked area, and
blue color block (0, 0, 255) indicates the less-popular area.
The results will be displayed in graphics marked in dierent colors.
6. Oponal: Click Export to export the stascs report in Microso Excel format.
6.9 Target Detecon
In live view mode, the target detecon funcon can achieve smart detecon, facial detecon,
vehicle detecon, and human body detecon during the last 5 seconds and the following 10
seconds.
Steps
1. In Live View mode, click Target Detecon to enter the target detecon interface.
2. Select dierent detecon types: smart detecon ( ), vehicle detecon ( ), face detecon
(
), and human body detecon ( ).
3. Select the historical analysis ( ) or real-me analysis ( ) to obtain the results.
Network Video Recorder User Manual
98
Note
●
The smart analysis results of the detecon are displayed in the list. Click a result in list to play
the related video.
●
Smart detecon ( ) includes work event detecon, street event detecon, not wearing hart
hat detecon, perimeter protecon, etc.
Network Video Recorder User Manual
99
Chapter 7 File Management
7.1 Search Files
Specify detailed condions to search videos and pictures.
Steps
1. Go to File Management → Video , or File Management → Picture .
2. Select a search method. For example, Search by Appearance, or Search by Event.
3. Specify detailed condions, including me, camera, etc.
4. Click Start Search.
5. Click Channel to select a channel as your desire. It will display the searching results of the
selected channel.
6. Oponal: Click or to switch view mode.
7. Oponal: For videos, click or in dierent view mode to lock a video. The locked video will
not be overwrien.
8. Oponal: Export search results.
1) Select result le(s) from the search result interface, or check Select All to select all les.
2) Click Export to export the selected le(s) to a backup device.
Note
●
You can click to view export progress.
●
You can click to return to search interface.
7.2 Export Files
Export les for backup purposes to a USB device, or eSATA HDD.
Steps
1. Search les. Refer to
Search Files for details.
2. Select les.
3. Click Export.
4. Oponal: For vehicle les, check Backup License Plate Stascs Info to export license plate
stascs informaon later.
5. Select the le to export as Video and log and click OK.
6. Select the backup device and folder path.
7. Click OK.
Network Video Recorder User Manual
100
Chapter 8 POS Conguraon
The device can be connected to a POS machine/server, and receive a transacon message to
overlay on the image during Live View or playback, as well as trigger a POS event alarm.
8.1 Congure POS Connecon
Steps
1. Go to System → POS .
2. Click Add.
Figure 8-1 POS Sengs
3. Select a POS device from the drop-down list.
4. Check Enable.
Note
The number of POS devices supported by each device is the half of its number of channel, e.g., 8
POS devices are supported for the DS-9616NI-I8 model.
5. Select POS Protocol.
Note
When a new protocol is selected, reboot the device to acvate the new sengs.
Universal Protocol
Click Advanced to expand more sengs when selecng the universal protocol. You can set
the start line idener, line break tag, and end line tag for the POS overlay characters, and
the case-sensive property of the characters. You can also oponally check the ltering
idener and the XML protocol.
Network Video Recorder User Manual
102
Figure 8-2 Universal Protocol Sengs
EPSON
The xed start and end line tag are used for EPSON protocol.
AVE
The xed start and end line tag are used for AVE protocol. Serial port and virtual serial port
connecon types are supported.
Click Custom to congure the AVE sengs. Select Rule as VSI-ADD or VNET . Set the address
bit of the POS message to send. Click OK to save the sengs.
NUCLEUS
Click the Custom to congure the NUCLEUS sengs.
Enter the employee No., shi No., and the terminal No. in the eld. The matching message
sent from the POS device will be used as the valid POS data.
Note
The NUCLEUS protocol must be used in the RS-232 connecon communicaon.
6. Select Connecon Mode and click Parameters to congure the parameters for each connecon
mode.
TCP Connecon
When using TCP connecon, the port must be set from 1 to 65535, and the port for each POS
machine must be unique.
Set the Allowed Remote IP Address of the device sending the POS message.
UDP Connecon
When using UDP connecon, the port must be set from 1 to 65535, and the port for each
POS machine must be unique.
Set the Allowed Remote IP Address of the device sending the POS message.
Network Video Recorder User Manual
103
USB-to-RS-232 Connecon
Congure the USB-to-RS-232 convertor port parameters, including the port serial number,
baud rate, data bit, stop bit, parity, and ow ctrl.
Figure 8-3 USB-to-RS-232 Sengs
RS-232 Connecon
Connect the device and the POS machine via RS-232. The RS-232 sengs can be congured in
Menu → Conguraon → RS-232 . The Usage must be set to Transparent Channel.
Mulcast Connecon
When connecng the device and the POS machine via Mulcast protocol, set the mulcast
address and port.
Sni Connecon
Connect the device and the POS machine via Sni. Congure the source address and
desnaon address sengs.
Network Video Recorder User Manual
104
Figure 8-4 Sni Sengs
8.2 Congure POS Text Overlay
Steps
1. Go to System → POS .
2. Click Channel Linkage and Display.
Figure 8-5 Overlay Character Sengs
3. Select linked channel to overlay the POS characters.
4. Set the characters overlay for the enabled POS.
●
Character encoding format: currently the Lan-1 format is available
●
Overlay mode of the characters to display in scrolling or page mod
Network Video Recorder User Manual
105
●
Font size and font color
●
Display me (sec) of the characters. The value ranges 5 -3600 sec.
●
Timeout of POS event. The value ranges 5 -3600 sec. When the device has not received the
POS message within the dened me, the transacon ends.
5. In Privacy Sengs, set the POS privacy informaon to not display on the image, e.g., the card
number, user name, etc.
The dened privacy informaon will be displayed using ***on the image instead.
6. Check Overlay POS in Live View. When this feature is enabled, the POS informaon is overlaid
on the Live View image.
Note
Drag the frame to adjust the textbox size and posion on POS sengs interface preview screen.
7. Click Apply to acvate the sengs.
8.3 Congure POS Alarm
A POS event can trigger channels to start recording, or trigger full screen monitoring, etc.
Steps
1. Go to Storage → Recording Schedule .
2. Set the arming schedule. Refer to Congure Arming Schedule .
3. Go to System → POS .
4. Click Event Linkage on the POS adding or eding interface.
Network Video Recorder User Manual
106
Figure 8-6 Set Trigger Cameras of POS
5. Select the normal linkage acons.
6. Select one or more alarm output(s) to trigger.
7. Select one or more channels to record or become full-screen monitoring when a POS alarm is
triggered.
8. Click Apply to save the sengs.
Network Video Recorder User Manual
107
Chapter 9 Storage
Note
The available funcons in this chapter may vary according to dierent models.
9.1 Storage Device Management
9.1.1 Manage Local HDD
Congure HDD Group
Mulple HDDs can be managed in groups. Video from specied channels can be recorded onto a
parcular HDD group through HDD sengs.
Steps
1. Go to Storage → Storage Mode .
2. Select Mode as Group.
3. Click Apply.
4. Go to Storage → Storage Device .
5. Select a HDD.
Figure 9-1 Storage Device
6. Click to enter Local HDD Sengs interface.
Network Video Recorder User Manual
108
Figure 9-2 Local HDD Sengs
7. Select a group number for the HDD.
8. Click OK.
Note
Regroup the cameras for HDD if the HDD group number is changed.
9. Go to Storage → Storage Mode .
10. Select group number from the list.
11. Select related camera(s) to save videos and pictures on the HDD group.
12. Click Apply.
Congure the HDD Property
HDD property can be set as R/W, Read-only, or Redundant.
Before You Start
Set the storage mode to Group. For detailed steps, refer to Congure HDD Group
Steps
1. Go to Storage → Storage Device .
2. Click of desired HDD.
3. Select HDD Property.
Network Video Recorder User Manual
109
R/W
HDD supports both read and write.
Read-only
Files in read-only HDD will not be overwrien.
Redundant
Save the videos and pictures not only in the R/W HDD but also in the redundant HDD. It
eecvely enhances the data safety and reliability. Ensure at least another HDD which is in
Read/Write status exists.
4. Click OK.
Congure the HDD Quota
Each camera can be congured with an allocated quota for storing videos or pictures.
Steps
1. Go to Storage → Storage Mode .
2. Select Mode as Quota.
3. Select a camera to set quota.
4. Enter the storage capacity in the text elds of Max. Record Capacity (GB) and Max. Picture
Capacity (GB).
5. Click Copy to to copy the quota sengs of the current camera to other cameras.
6. Click Apply.
Note
●
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos
and pictures.
●
Reboot the video recorder to acvate the new sengs.
9.1.2 Add a Network Disk
You can add the allocated NAS or IP SAN disk to the device, and use it as a network HDD.
Steps
1. Go to Storage → Storage Device .
2. Click Add.
Network Video Recorder User Manual
110
Figure 9-3 Add NetHDD
3. Select NetHDD type.
4. Enter NetHDD IP address and click Search to search the available NetHDD.
5. Select the desired NetHDD.
6. Click OK.
7. The added NetHDD will be displayed in the HDD list. Select the newly added NetHDD and click
Init.
9.1.3 Manage eSATA
Note
The eSATA funcon is only available for certain models.
Congure eSATA for Data Storage
When there is an external eSATA device connected to your video recorder, you can congure the
eSATA usage as data storage and manage the eSATA.
Steps
1. Go to Storage → Advanced .
2. Select eSATA Usage as Export or Record/Capture.
Network Video Recorder User Manual
111
Export
Use the eSATA for backup.
Record/Capture
Use the eSATA for record/capture. Refer to the following steps for operang instrucons.
Figure 9-4 eSATA Mode
What to do next
If eSATA usage is set as Record/Capture, enter the storage device interface to edit its property or
inialize it.
Congure eSATA for Auto Backup
If you made an automac backup plan, the video recorder will back up the local videos of 24 hours
ahead of the backup start me to eSATA.
Before You Start
Ensure the device has correctly connected with an external eSATA hard drive, and its usage type is
set as Export. Refer to Manage eSATA for details.
Steps
1. Go to Storage → Auto Backup .
2. Check Auto Backup.
3. Set the backup start me in Start Backup at.
Note
If the day experiences a failed backup, the video recorder will back up the videos 48 hours ahead
of the backup start me in the next day.
4. Select channels for backup.
5. Select Backup Stream Type as your desire.
6. Select Overwrite type.
-
Disable: When HDD is full, it will stop wring.
-
Enable: When HDD is full, it will connue to write new les by deleng the oldest les.
7. Click Apply.
Network Video Recorder User Manual
112
Figure 9-5 Congure eSATA for Auto Backup
9.2 Disk Array
A disk array is a data storage virtualizaon technology that combines mulple physical disk drives
into a single logical unit. Also known as a "RAID", an array stores data over mulple HDDs to
provide enough redundancy so that data can be recovered if one disk fails. Data is distributed
across the drives in one of several ways called "RAID levels", based the redundancy and
performance required.
Note
The funcons in this secon are only available for certain models.
9.2.1 Create a Disk Array
The video recorder supports soware-based disk arrays. Enable the RAID funcon as required, and
ensure each HDD capacity is not less than 4 TB. If your device has no more than 16 SATA interfaces,
a disk array can contain no more than 8 HDDs. If your device has 24 SATA interfaces, a disk array
can contain no more than 12 HDDs. Two ways are available for creang an array: one-touch
conguraon and manual conguraon.
One-Touch Creaon
One-touch conguraon creates the disk array. By default, the array type created by one-touch
conguraon is RAID 5.
Network Video Recorder User Manual
113
Before You Start
Install at least 3 HDDs. If more than 10 HDDs are installed, 2 arrays will be created. To maintain
reliability and stability running of the HDDs, it is recommended to use of enterprise-level HDDs of
the same model and capacity.
Steps
1. Go to Storage → Advanced .
2. Check Enable RAID.
3. Click Apply and reboot the device to have sengs take eect.
4. Aer reboot, go to Storage → RAID Setup → Physical Disk .
5. Click One-touch Cong.
6. Edit Array Name and click OK to start conguring.
Note
If you install 4 or more HDDs, a hot spare disk for array rebuilding will be created.
7. Oponal: The video recorder will automacally inialize the created array. Go to Storage →
RAID Setup → Array to view the informaon of the created array.
Manual Creaon
Manually create a RAID 0, RAID 1, RAID 5, RAID 6, or RAID 10 array.
Steps
1. Go to Storage → Advanced .
2. Check Enable RAID.
3. Click Apply and reboot the device to have sengs take eect.
4. Aer reboot, go to Storage → RAID Setup → Physical Disk .
5. Click Create.
Figure 9-6 Create Array
6. Enter Array Name.
Network Video Recorder User Manual
114
7. Select RAID Level as required.
8. Select the physical disks to constute the array.
Table 9-1 The Required Number of HDDs
RAID Level The Required Number of HDDs
RAID 0 At least 2 HDDs.
RAID 1 At least 2 HDDs.
RAID 5 At least 3 HDDs.
RAID 6 At least 4 HDDs.
RAID 10 The number of HDD must be an even ranges from 4 to 16.
9. Click OK.
10. Oponal: The video recorder will automacally inialize the created array. Go to Storage →
RAID Setup → Array to view the informaon of the created array.
Figure 9-7 Array List
9.2.2 Rebuild an Array
The array status includes Funconal, Degraded, and Oine. To ensure the high security and
reliability of the data stored in an array, take immediate and proper maintenance of the arrays
according its status.
Funconal
No disk loss in the array.
Oine
The number of lost disks has exceeded the limit.
Degraded
If any HDD fails in the array, the array degrades. Restore it to Funconal status by rebuilding the
array.
Congure a Hot Spare Disk
The hot spare disk is required for the disk array automac rebuilding.
Steps
1. Go to Storage → RAID Setup → Physical Disk .
Network Video Recorder User Manual
115
Figure 9-8 Physical Disk
2. Click of an available HDD to set it as the hot spare disk.
Automacally Rebuild an Array
The video recorder can automacally rebuild degraded arrays with the hot spare disks.
Before You Start
Create hot spare disks. For details, refer to Congure a Hot Spare Disk .
Steps
1. Go to Storage → RAID Setup → Array .
Figure 9-9 Array List
Manually Rebuild an Array
If no hot spare disks are congured, rebuild a degraded array manually.
Before You Start
At least one available physical disk must exist to rebuild an array.
Steps
1. Go to Storage → RAID Setup → Array .
2. Click of the degraded array.
Network Video Recorder User Manual
116
Figure 9-10 Rebuild Array
3. Select the available physical disk.
4. Click OK.
5. Click OK on the pop up message box "Do not unplug the physical disk when it is under
rebuilding."
Network Video Recorder User Manual
117
Chapter 10 Hot Spare Recorder Backup
Video recorders can form an N+1 hot spare system. The system consists of several working video
recorders and a hot spare video recorder; when the working video recorder fails, the hot spare
video recorder switches into operaon, thus increasing the reliability of the system. Contact your
dealer for details of models that support the hot spare funcon.
A bidireconal connecon shown in the gure below is required to be built between the hot spare
video recorder and each working video recorder.
Figure 10-1 Building a Hot Spare System
Note
The available funcons in this chapter may vary according to dierent models.
10.1 Set Hot Spare Device
Hot spare devices takes over working device tasks when working device fails.
Steps
1. Go to System → Hot Spare .
2. Select Work Mode as Hot Spare Mode.
Figure 10-2 Hot Spare
3. Click Apply.
4. Click Yes in the pop-up aenon box to reboot the device.
Note
●
The camera connecon will be disabled when the device works in hot spare mode.
●
It is highly recommended to restore the device defaults aer switching the working mode of
the hot spare device to normal mode to ensure the normal operaon aerward.
Network Video Recorder User Manual
118
10.2 Set Working Recorder
Steps
1. Go to System → Hot Spare .
2. Select Work Mode as Normal Mode.
3. Check Enable.
4. Enter IP address, user name, and admin password of the hot spare recorder.
Figure 10-3 Hot Spare
5. Click Apply.
10.3 Manage Hot Spare System
Steps
1. Go to System → Hot Spare in the hot spare recorder.
2. Check working recorders on the device list and click Add to link the working recorder to the hot
spare recorder. The working recorder working status descripons are as follows:
No record
The working recorder works properly.
Backing up
If the working recorder goes oine, the hot spare recorder will record the videos of the
network camera connected to the working device. The video back up funcons for one
working recorder at a me.
Synchronizing
When the working recorder comes back online, the lost videos will be restored by the video
synchronizaon funcon. The video synchronizaon funcon can be enabled for one working
recorder at a me.
Note
A hot spare recorder can connect up to 32 working recorders.
Network Video Recorder User Manual
119
Figure 10-4 Add Working Recorder
Network Video Recorder User Manual
120
Chapter 11 Network Sengs
11.1 Congure DDNS
You can set Dynamic DNS service for network access. Dierent DDNS modes are available: DynDNS,
PeanutHull, and NO-IP.
Before You Start
You must register the DynDNS, PeanutHull, or NO-IP services with your ISP before conguring
DDNS sengs.
Steps
1. Go to System → Network → TCP/IP → DDNS
Figure 11-1 DDNS Sengs
2. Check Enable.
3. Select DDNS Type as DynDNS.
4. Enter Server Address for DynDNS (i.e., members.dyndns.org).
5. Under Device Domain Name, enter the domain name obtained from the DynDNS Website.
6. Enter User Name and Password registered in the DynDNS Website.
7. Click Apply.
11.2 Congure PPPoE
If the device is connected to Internet through PPPoE, you need to congure user name and
password accordingly under System → Network → TCP/IP → PPPoE .
Contact your Internet service provider for details about PPPoE service.
Network Video Recorder User Manual
121
11.3 Congure Port Mapping (NAT)
Two ways are provided for port mapping to realize the remote access via the cross-segment
network, UPnP™ and manual mapping.
Before You Start
If you want to enable the UPnP™ funcon of the device, you must enable the UPnP™ funcon of
the router to which your device is connected. When the network working mode of the device is set
as mul-address, the Default Route of the device should be in the same network segment as that
of the LAN IP address of the router.
Universal Plug and Play (UPnP™) can permit the device seamlessly discover the presence of other
network devices on the network and establish funconal network services for data sharing,
communicaons, etc. You can use the UPnP™ funcon to enable the fast connecon of the device
to the WAN via a router without port mapping.
Steps
1. Go to System → Network → TCP/IP → NAT .
Figure 11-2 Port Mapping Seng
2. Check Enable.
3. Select Mapping Type as Manual or Auto.
-
Auto: If you select Auto, the port mapping items are read-only, and the external ports are set
by the router automacally.
-
Manual: If you select Manual, you can edit the external port on your demand by clicking to
acvate External Port Sengs.
Note
●
You can use the default port No., or change it according to actual requirements.
●
External Port indicates the port No. for port mapping in the router.
●
The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of
the other ports should be between 1 and 65535 and the value must be dierent from each
Network Video Recorder User Manual
122
other. If mulple devices are congured for the UPnP™ sengs under the same router, the
value of the port No. for each device should be unique.
4. Enter the virtual server seng page of router; ll in the blank of Internal Source Port with the
internal port value, the blank of External Source Port with the external port value, and other
required contents.
Note
●
Each item should be corresponding with the device port, including server port, hp port, RTSP
port and hps port.
●
The virtual server seng interface below is for reference only, it may be dierent due to
dierent router manufactures. Please contact the manufacture of router if you have any
problems with seng virtual server.
Figure 11-3 Set Virtual Server Item
11.4 Congure SNMP
You can congure SNMP sengs to get device status and parameter informaon.
Before You Start
Download the SNMP soware to receive device informaon via the SNMP port. By seng the trap
address and port, the device is allowed to send alarm events and excepon messages to the
center.
Steps
1. Go to System → Network → Advanced → SNMP .
Network Video Recorder User Manual
123
Figure 11-4 SNMP Sengs
2. Check Enable. A message will pop up to nofy about a possible security risk. Click Yes to
connue.
3. Congure the SNMP sengs as needed.
Trap Address
SNMP host IP address.
Trap Port
Port of the SNMP host.
4. Click Apply.
Network Video Recorder User Manual
124
11.5 Congure Email
The system can be congured to send an e-mail nocaon to all designated users when a
specied event occurs such as when an alarm or moon event is detected, or the administrator
password is changed, etc.
Before You Start
The device must be connected to a local area network (LAN) that contains an SMTP mail server.
The network must also be connected to either an intranet or the Internet depending on the
locaon of the e-mail accounts to which you want to send nocaons.
Steps
1. Go to System → Network → Advanced → Email .
Figure 11-5 Email Sengs
2. Congure the email sengs.
Enable Server Authencaon
Check to enable the funcon if the SMTP server requires user authencaon and enter the
user name and password accordingly.
SMTP Server
The IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
SMTP Port
The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS
Check to enable SSL/TLS if required by the SMTP server.
Sender
Network Video Recorder User Manual
125
The sender's name.
Sender's Address
The sender's address.
Select Receivers
Select the receiver. Up to 3 receivers can be congured.
Receiver
The receiver's name.
Receiver's Address
The e-mail address of the user to be noed.
Enable Aached Picture
Check to send e-mail with aached alarm images. The interval is the me between sending
two subsequent alarm images.
3. Click Apply.
4. Oponal: Click Test to send a test email.
11.6 Congure Port
You can congure dierent types of ports to enable relevant funcons.
Steps
1. Go to System → Network → Advanced → More Sengs .
Network Video Recorder User Manual
126
Figure 11-6 Port Sengs
2. congure port sengs as needed.
Alarm Host IP/Port
With a remote alarm host congured, the device will send the alarm event or excepon
message to the host when an alarm is triggered. The remote alarm host must have the client
management system (CMS) soware installed.The alarm host IP refers to the IP address of the
remote PC on which the CMS soware (e.g., iVMS-4200) is installed, and the alarm host port
(7200 by default) must be the same as the alarm monitoring port congured in the soware.
Server Port
Server port (8000 by default) should be congured for remote client soware access and its
valid range is 2000 to 65535.
HTTP Port
HTTP port (80 by default) should be congured for remote Web browser access.
Mulcast IP
Mulcast can be congured to enable Live View for cameras that exceed the maximum
number allowed through network. A mulcast IP address covers Class-D IP ranging from
224.0.0.0 to 239.255.255.255 and it is recommended to use an IP address ranging from
239.252.0.0 to 239.255.255.255. When adding a device to the CMS soware, the mulcast
address must be the same as that of the device.
RTSP Port
Network Video Recorder User Manual
127
RTSP (Real Time Streaming Protocol) is a network control protocol designed to control
streaming media servers. The port is 554 by default.
Enhanced SDK Service Port
The enhanced SDK service adopts TLS protocol over the SDK service that provides safer data
transmission. The port is 8443 by default.
3. Click Apply.
11.7 Congure ONVIF
ONVIF protocol allows the connecon with third-party cameras. The added user accounts have the
permission to connect other devices via ONVIF protocol.
Steps
1. Go to Maintenance → System Service → ONVIF .
2. Check Enable ONVIF to enable the ONVIF access management.
Note
ONVIF protocol is disabled by default.
3. Click Add.
4. Enter User Name, and Password
Cauon
We highly recommend you create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories: upper case leers, lower case
leers, numbers, and special characters.) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
5. Select Level as Media User, Operator or Admin.
6. Click OK.
Network Video Recorder User Manual
128
Chapter 12 User Management and Security
12.1 Manage User Accounts
The Administrator user name is admin and the password is set when you start the device for the
rst me. The Administrator has the permission to add and delete users and congure user
parameters.
12.1.1 Add a User
Steps
1. Go to System → User .
2. Click Add to enter the operaon permission interface.
3. Input the admin password and click OK.
4. In the Add User interface, enter the informaon for a new user.
Cauon
Strong Password Recommended–We highly recommend you create a strong password of your
own choosing (using a minimum of 8 characters, including at least three of the following
categories: upper case leers, lower case leers, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password
regularly. Especially in the high security systems, reseng the password monthly or weekly can
beer protect your product.
User Level
Set the user level to Operator or Guest. Dierent user levels have dierent operang
permission.
●
Operator: An Operator user level has Two-way Audio permission in Remote Conguraon
and all operang permissions in Camera Conguraon by default.
●
Guest: The Guest user has no permission of Two-way Audio in Remote Conguraon and
only has the local/remote playback in the Camera Conguraon by default.
User’s MAC Address
The MAC address of the remote PC that logs onto the device. If it is congured and enabled,
it allows only the remote user with this MAC address to access the device.
5. Click OK.
In the User Management interface, the added new user is displayed on the list.
Network Video Recorder User Manual
129
12.1.2 Edit the Admin User
For the admin user account, you can modify your password and unlock paern.
Steps
1. Go to System → User .
2. Select the admin user from the list.
3. Click Modify.
Figure 12-1 Edit User (Admin)
4. Edit the admin user informaon as desired, including a new admin password (strong password is
required) and MAC address.
5. Edit the unlock paern for the admin user account.
1) Check Enable Unlock Paern to enable the use of an unlock paern when logging in to the
device.
2) Use the mouse to draw a paern among the 9 dots on the screen, and release the mouse
when the paern is done.
6. Check Export of GUID File to export the GUID le for the admin user account.
Note
When the admin password is changed, export the new GUID to the connected USB ash drive in
the Import/Export interface for the future password reseng.
7. Congure security queson for password reseng.
8. Congure reserved email for password reseng.
Network Video Recorder User Manual
130
9. Click OK to save the sengs.
12.1.3 Edit an Operator/Guest User
You can edit the user informaon, including user name, password, permission level, and MAC
address.
Steps
1. Go to System → User .
2. Select a user from the list and click Modify.
Figure 12-2 Edit User (Operator/Guest)
3. Edit the user informaon as desired, including the new password (strong password is required)
and MAC address.
4. Click OK.
12.2 Manage User Permissions
12.2.1 Set User Permissions
For an added user, you can assign the dierent permissions, including local and remote operaon
of the device.
Steps
1. Go to System → User .
2. Select a user from the list, and then click to enter the permission sengs interface.
Network Video Recorder User Manual
131
Figure 12-3 User Permission Sengs Interface
3. Set the user's operang permissions for Local Conguraon, Remote Conguraon, and
Camera Conguraon for the user.
1) Set Local Conguraon
Local Log Search
Searching and viewing logs and system informaon of device.
Local Parameters Sengs
Conguring parameters, restoring factory default parameters, and imporng/exporng
conguraon les.
Local Camera Management
Adding, deleng, and eding of IP cameras.
Local Advanced Operaon
Operang HDD management (inializing HDD, seng HDD property), upgrading system
rmware, clearing I/O alarm output.
Local Shutdown Reboot
Shung down or reboong the device.
2) Set Remote Conguraon
Remote Log Search
Network Video Recorder User Manual
132
Remotely viewing logs that are saved on the device.
Remote Parameters Sengs
Remotely conguring parameters, restoring factory default parameters, and imporng/
exporng conguraon les.
Remote Camera Management
Remote adding, deleng, and eding of the IP cameras.
Remote Serial Port Control
Conguring sengs for RS-232 and RS-485 port sengs.
Remote Video Output Control
Sending remote buon control signals.
Two-Way Audio
Operang the two-way radio between the remote client and the device.
Remote Alarm Control
Remotely arming (nofy alarm and excepon message to the remote client) and
controlling the alarm output.
Remote Advanced Operaon
Remotely operang HDD management (inializing HDD, seng HDD property), upgrading
system rmware, clearing I/O alarm output.
Remote Shutdown/Reboot
Remotely shung down or reboong the device.
3) Set Camera Conguraon
Remote Live View
Remotely viewing live video of the selected camera(s).
Local Manual Operaon
Locally starng/stopping manual recording and alarm output of the selected camera(s).
Remote Manual Operaon
Remotely starng/stopping manual recording and alarm output of the selected camera(s).
Local Playback
Locally playing back recorded les of the selected camera(s).
Remote Playback
Remotely playing back recorded les of the selected camera(s).
Local PTZ Control
Locally controlling PTZ movement of the selected camera(s).
Remote PTZ Control
Remotely controlling PTZ movement of the selected camera(s).
Network Video Recorder User Manual
133
Local Video Export
Locally exporng recorded les of the selected camera(s).
Local Live View
View live video of the selected camera(s) in local.
4. Click OK to save the sengs.
12.2.2 Set Live View Permission on Lock Screen
The admin user can set live view permission for specic cameras in the screen lock status of device.
●
The admin user can set this permission for user accounts.
●
When the normal user (Operator or Guest) has no local live view permission for specic camera
(s), the live view permission for such camera (s) on lock screen status cannot be congured (live
view not allowed by default).
Steps
1. Go to System → User .
2. Click Live View Permission on Lock Screen.
3. Input admin password and click Next.
Figure 12-4 Set Live View Permissions on Lock Screen
Network Video Recorder User Manual
134
4. Set the permissions. Select the camera (s) to allow live view when the current user account is in
logout status.
5. Click OK.
12.3 Congure Password Security
12.3.1 Export GUID File
The GUID le can help you to reset password when you forget password. Please keep it properly.
Steps
1. Check Export and click OK to export GUID le when you are acvang the device, or eding the
admin user account.
2. Insert a USB ash drive to your device, and export the GUID le to the USB ash drive.
Figure 12-5 Export GUID File
3. Select a Device.
4. Select a directory on the device.
5. Click Export.
12.3.2 Congure Security Quesons
The security quesons can help you to reset password when you forget your password, or
encounter security issues.
Steps
1. Click Security Queson Conguraon when you are acvang the device, or eding the admin
user account.
2. Set the security quesons and answers.
Network Video Recorder User Manual
135
Figure 12-6 Congure Security Quesons
3. Click OK.
12.4 Reset Password
When you forget the admin password, you can reset the password by imporng the GUID le,
answering security quesons, or entering vericaon code from your reserved email.
12.4.1 Reset Password by GUID
Before You Start
The GUID le must be exported and saved in a USB ash drive aer you have acvated the device
or edited the admin user account.
Steps
1. On the user login interface, click Forgot Password.
2. On Password Reset Type , Select Verify by GUID.
Note
Please insert the USB ash drive stored with the GUID le to the device before reseng
password.
3. Select the GUID le from the USB ash drive and click Import to import the le to the device.
Note
If you have imported the wrong GUID le for 7 mes, you will be not allowed to reset the
password for 30 minutes.
Network Video Recorder User Manual
136
4. Aer the GUID le is successfully imported, enter the reset password interface to set the new
admin password.
5. Click OK to set the new password. You can export the new GUID le to the USB ash drive for
future password reseng.
Note
When the new password is set, the original GUID le will be invalid. The new GUID le should be
exported for future password reseng. You can also enter User → User Management to edit
the admin user and export the GUID le.
12.4.2 Reset Password by Security Quesons
Before You Start
You have congured the security quesons when you acvate the device or edit the admin user
account.
Steps
1. On the user login interface, click Forgot Password.
2. Select the password reseng type as Verify by Security Queson.
3. Input the correct answers of the three security quesons.
4. Click OK.
5. Create the new admin password on the Reset Password interface.
Network Video Recorder User Manual
137
Chapter 13 System Management
13.1 Congure Device
Steps
1. Go to System → General .
2. Congure the following sengs.
Language
The default language used is English.
Output Standard
Set the output standard to NTSC or PAL, which must be the same as the video input standard.
Resoluon
Congure video output resoluon.
Device Name
Edit device name.
Device No.
Edit the device serial number. The Device No. can be set in the range of 1 to 255, and the
default No. is 255. The number is used for the remote and keyboard control.
Auto Logout
Set the meout me for menu inacvity. E.g., when the meout me is set to 5 minutes,
then the system will exit from the current operaon menu to Live View screen aer 5
minutes of menu inacvity.
Mouse Pointer Speed
Set the speed of the mouse pointer; 4 levels are congurable.
Enable Wizard
Enable/disable the Wizard when the device starts up.
Enable Password
Enable/disable the use of the login password.
3. Click Apply to save the sengs.
13.2 Congure Time
13.2.1 Manual Time Synchronizaon
Network Video Recorder User Manual
138
Steps
1. Go to System → General .
2. Congure the date and me.
3. Click Apply to save the sengs.
13.2.2 NTP Synchronizaon
Connecon to a network me protocol (NTP) server can be congured on your device to ensure
the system’s date and me accuracy.
Steps
1. Go to System → Network → TCP/IP → NTP .
2. Check Enable.
3. Congure NTP sengs as need.
Interval (min)
Time interval between two me synchronizaon with NTP server
NTP Server
IP address of the NTP server
NTP Port
Port of the NTP server
4. Click Apply
13.2.3 DST Synchronizaon
DST (daylight saving me) refers to the period of the year when clocks are moved one period
ahead. In some areas worldwide, this has the eect of creang more sunlit hours in the evening
during months when the weather is the warmest.
We advance our clocks ahead a certain period (depends on the DST bias you set) at the beginning
of DST, and move them back the same period when we return to standard me (ST).
Steps
1. Go to System → General .
2. Check Enable DST.
3. Set DST mode as Auto or Manual.
Auto
Automacally enable the default DST period according to the local DST rules.
Manual
Manually set the start me and end me of the DST period, and the DST bias.
4. Set the DST Bias. Set the me (30/60/90/120 minutes) oset from the standard me.
5. Click Apply to save the sengs.
Network Video Recorder User Manual
139
13.3 Network Detecon
13.3.1 Network Trac Monitoring
Network trac monitoring is the process of reviewing, analyzing and managing network trac for
any abnormality or process that can aect network performance, availability and/or security.
Steps
1. Go to Maintenance → Network → Trac .
2. You can view the real-me network trac status, including MTU (Maximum Transmission Unit),
and network throughput.
Figure 13-1 Network Trac
13.3.2 Test Network Delay and Packet Loss
Network delay is caused by slow response of the device when oversized data informaon is not
limited during transmission under certain network protocol, e.g. TCP/IP. Packet loss test is for
tesng network packet loss rate that is the rao of lost data packet and total number of
transmied data packet.
Steps
1. Go to Maintenance → Network → Network Detecon .
2. Select a network card in Select NIC.
3. Enter the desnaon IP address in Desnaon Address.
4. Click Test.
Network Video Recorder User Manual
140
Figure 13-2 Test Network Delay and Packet Loss
13.3.3 Export Network Packet
Aer the recorder accessing network, you can use USB ash drive to export network packet.
Before You Start
Prepare a USB ash drive to export network packet.
Steps
1. Insert the USB ash drive.
2. Go to Maintenance → Network → Network Detecon .
3. Select network card in Select NIC.
4. Select the USB ash drive in Device Name. You can click Refresh if the connected local backup
device cannot be displayed.
Figure 13-3 Export Network Packet
5. Oponal: Click Status to view the network status.
6. Click Export.
Note
It will export 1 MB data each me as default.
13.3.4 Network Resource Stascs
The remote access, including web browser and client soware, will consume output bandwidth.
You can view the real-me bandwidth stascs.
Steps
1. Go to Maintenance → Network → Network Stat .
Network Video Recorder User Manual
141
Figure 13-4 Network Resource Stascs
2. View the bandwidth stascs, including IP Camera, Remote Live View, Remote Play, Net Total
Idle, etc.
3. Oponal: Click Refresh to obtain the latest data.
13.4 Storage Device Maintenance
13.4.1 Bad Sector Detecon
Steps
1. Go to Maintenance → HDD Operaon → Bad Sector Detecon .
2. Select the HDD No. you want to congure in the dropdown list.
3. Select All Detecon or Key Area Detecon as the detecon type.
4. Click Self-Test to start the detecon.
Figure 13-5 Bad Sector Detecon
Network Video Recorder User Manual
142
Note
●
You can pause/resume or cancel the detecon.
●
Aer tesng has been completed, you can click Error informaon to see the detailed damage
informaon.
13.4.2 S.M.A.R.T. Detecon
HDD detecon funcons such as the adopng of the S.M.A.R.T. and the Bad Sector Detecon
techniques. S.M.A.R.T. (Self-Monitoring, Analysis, and Reporng Technology) are HDD monitoring
systems to detect various reliability indicators in the hopes of ancipang failures.
Steps
1. Go to Maintenance → HDD Operaon → S.M.A.R.T .
2. Select the HDD to view its S.M.A.R.T. informaon list.
3. Set Self-Test Type.
4. Click Self-Test to start the S.M.A.R.T. HDD self-evaluaon.
Figure 13-6 S.M.A.R.T. Sengs Interface
Note
To use the HDD even when the S.M.A.R.T. checking has failed, check Connue to use the disk
when self-evaluaon is failed.
The related informaon of the S.M.A.R.T. is shown, and you can check the HDD status.
Network Video Recorder User Manual
143
13.4.3 HDD Health Detecon
You can view the health status of a 4 TB to 8 TB Seagate HDD that generated aer October 1, 2017.
Use this funcon to help troubleshoot HDD problems. Health Detecon shows a more detailed
HDD status than the S.M.A.R.T. funcon.
Steps
1. Go to Maintenance → HDD Operaon → Health Detecon .
Figure 13-7 Health Detecon
2. Click a HDD to view details.
13.4.4 Congure Disk Clone
Select the HDDs to clone to the eSATA HDD.
Before You Start
Connect an eSATA disk to the device.
Steps
1. Go to Maintenance → HDD Operaon → HDD Clone .
Network Video Recorder User Manual
144
Figure 13-8 HDD Clone
2. Check the HDD to clone. The capacity of the selected HDD must match the capacity of the clone
desnaon.
3. Click Clone.
4. Click Yes on the pop up message box to create the clone.
13.4.5 Repair Database
Repairing database will rebuild all databases. It might help to improve your system speed aer
upgrade.
Steps
1. Go to Storage → Storage Device .
2. Select the drive.
3. Click Repair Database.
4. Click Yes.
Note
●
Repairing database will rebuild all databases. Exisng data will not be aected, but local
search and playback funcons will not be available during the process, you can sll achieve
search and playback funcons remotely via web browser, client soware, etc.
●
Do not pull out the drive, or shut down the device during the process.
●
You can see the repairing progress at Status.
Figure 13-9 Repair Database
Network Video Recorder User Manual
145
13.5 Upgrade Device
Your device rmware can be upgraded with a local backup device or remote FTP server.
13.5.1 Upgrade by Local Backup Device
Before You Start
Connect your device to a local storage device that contains the rmware update le.
Steps
1. Go to Maintenance → Upgrade .
2. Click Local Upgrade to enter the local upgrade interface.
Figure 13-10 Local Upgrade
3. Select the rmware update le from the storage device.
4. Click Upgrade to start upgrading.
Aer the upgrade is completed, the device will reboot automacally to acvate the new
rmware.
13.5.2 Upgrade by FTP
Before You Start
Ensure the network connecon of the PC (running FTP server) and the device are valid and correct.
Run the FTP server on the PC and copy the rmware into the corresponding directory of your PC.
Steps
1. Go to Maintenance → Upgrade .
2. Click FTP to enter the local upgrade interface.
Figure 13-11 FTP Upgrade
Network Video Recorder User Manual
146
3. Enter FTP Server Address.
4. Click Upgrade to start upgrading.
5. Aer the upgrading is complete, reboot the device to acvate the new rmware.
13.5.3 Upgrade by Web Browser
You can upgrade the device by web browser
Aer logging in to the device via web browser, go to Conguraon → System → Maintenance →
Upgrade . Click Browse to upload the rmware, and upgrade the device.
13.6 Import/Export Device Conguraon Files
The device conguraon les can be exported to a local device for backup; and the conguraon
les of one device can be imported to mulple devices if they are to be congured with the same
parameters.
Before You Start
Connect a storage device to your device. To import the conguraon le, the storage device must
contain the le.
Steps
1. Go to Maintenance → Import/Export .
Figure 13-12 Import/Export Conguraon File
2. Export or import the device conguraon les.
-
Click Export to export conguraon les to the selected local backup device.
-
To import a conguraon le, select the le from the selected backup device and click Import.
Note
Aer having nished imporng conguraon les, the device will reboot automacally.
Network Video Recorder User Manual
147
13.7 Search & Export Log Files
The device operaon, alarm, excepon, and informaon can be stored in log les, which can be
viewed and exported at any me.
Steps
1. Go to Maintenance → Log Informaon .
Figure 13-13 Log Search Interface
2. Set the log search condions, including the me, major type and minor type.
3. Click Search to start searching the log les.
4. The matched log les will be displayed on the list, as shown below.
Figure 13-14 Log Search Results
Note
Up to 2,000 log les can be displayed each me.
5. Related Operaon:
Click or double-click it to view detailed informaon.
Click it to view the related video le.
Export/Export ALL Click it to export all the system logs to the storage device.
13.8 Restore Default Sengs
Steps
1. Go to Maintenance → Default .
Network Video Recorder User Manual
148
Figure 13-15 Restore Default Sengs
2. Select the restore type from the following three opons.
Restore Defaults
Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the
factory default sengs.
Factory Defaults
Restore all parameters to the factory default sengs.
Restore to Inacve
Restore the recorder to inacve status.
Note
The recorder will reboot automacally aer restoring to the default sengs.
13.9 Security Management
13.9.1 RTSP Authencaon
You can specically secure the stream data of live view by seng the RTSP authencaon.
Steps
1. Go to System → System Service → System Service .
Figure 13-16 RTSP Authencaon
2. Select RTSP Authencaon Type.
Note
Two authencaon types are selectable, if you select digest, only the request with digest
authencaon can access the video stream by the RTSP protocol via the IP address. For security
reasons, it is recommended to select digest as the authencaon type.
Network Video Recorder User Manual
149
3. Click Apply.
4. Restart the device to take eect the sengs.
13.9.2 ISAPI Service
ISAPI (Internet Server Applicaon Programming Interface) is an open protocol based on HTTP,
which can realize the communicaon between the system devices (e.g., network camera, NVR,
etc.). The device is as a server, the system can nd and connect the device.
Steps
1. Go to System → System Service → System Service .
2. Check Enable ISAPI.
3. Click Apply.
4. Restart the device to take eect the sengs.
13.9.3 HTTP Authencaon
If you need to enable the HTTP service, you can set HTTP authencaon to enhance access
security.
Steps
1. Go to Maintenance → System Service → System Service .
Figure 13-17 HTTP Authencaon
2. Check Enable HTTP.
3. Select HTTP Authencaon Type.
Note
Two authencaon types are selectable, for security reasons, it is recommended to select digest
as the authencaon type.
4. Click Apply to save the sengs.
5. Restart the device to take eect the sengs.
Network Video Recorder User Manual
150
Chapter 14 Appendix
14.1 Glossary
Dual-Stream
Dual-stream is a technology used to record high resoluon video locally while transming a
lower resoluon stream over the network. The two streams are generated by the DVR, with the
main stream having a maximum resoluon of 1080P and the sub-stream having a maximum
resoluon of CIF.
DVR
Acronym for Digital Video Recorder. A DVR is device that is able to accept video signals from
analog cameras, compress the signal and store it on its hard drives.
HDD
Acronym for Hard Disk Drive. A storage medium which stores digitally encoded data on plaers
with magnec surfaces.
DHCP
Dynamic Host Conguraon Protocol (DHCP) is a network applicaon protocol used by devices
(DHCP clients) to obtain conguraon informaon for operaon in an Internet Protocol
network.
HTTP
Acronym for Hypertext Transfer Protocol. A protocol to transfer hypertext request and
informaon between servers and browsers over a network.
PPPoE
PPPoE, Point-to-Point Protocol over Ethernet, is a network protocol for encapsulang Point-to-
Point Protocol (PPP) frames inside Ethernet frames. It is used mainly with ADSL services where
individual users connect to the ADSL transceiver (modem) over Ethernet and in plain Metro
Ethernet networks.
DDNS
Dynamic DNS is a method, protocol, or network service that provides the capability for a
networked device, such as a router or computer system using the Internet Protocol Suite, to
nofy a domain name server to change, in real me (ad-hoc) the acve DNS conguraon of its
congured hostnames, addresses or other informaon stored in DNS.
Hybrid DVR
A hybrid DVR is a combinaon of a DVR and NVR.
NTP
Acronym for Network Time Protocol. A protocol designed to synchronize the clocks of
computers over a network.
Network Video Recorder User Manual
151
NTSC
Acronym for Naonal Television System Commiee. NTSC is an analog television standard used
in such countries as the United States and Japan. Each frame of an NTSC signal contains 525
scan lines at 60Hz.
NVR
Acronym for Network Video Recorder. An NVR can be a PC-based or embedded system used for
centralized management and storage for IP cameras, IP Domes and other DVRs.
PAL
Acronym for Phase Alternang Line. PAL is also another video standard used in broadcast
televisions systems in large parts of the world. PAL signal contains 625 scan lines at 50Hz.
PTZ
Acronym for Pan, Tilt, Zoom. PTZ cameras are motor driven systems that allow the camera to
pan le and right, lt up and down and zoom in and out.
USB
Acronym for Universal Serial Bus. USB is a plug-and-play serial bus standard to interface devices
to a host computer.
14.2 Communicaon Matrix
Please scan the QR code below to view the communicaon matrix document.
Figure 14-1 Communicaon Matrix
14.3 Device Command
Please scan the QR code below to view the device command document.
Network Video Recorder User Manual
152
Figure 14-2 Device Command
14.4 Frequently Asked Quesons
14.4.1 Why is there a part of channels displaying “No Resource” or turning black
screen in mul-screen live view?
Reason
1. Sub-stream resoluon or bitrate sengs is inappropriate.
2. Connecng sub-stream failed.
Soluon
1. Go to Camera → Video Parameters → Sub-Stream . Select the channel, and turn down the
resoluon and max. bitrate (resoluon shall be less than 720p, max. bitrate shall be less than
2048 Kbps).
Note
If your video recorder noes not support this funcon, you can log in to the camera, and
adjust video parameters via web browser.
2. Properly set the sub-stream resoluon and max. bitrate (resoluon shall be less than 720p, max.
bitrate shall be less than 2048 Kbps), then delete the channel and add it back again.
14.4.2 Why is the video recorder nofying the stream type is not supported?
Reason
The camera encoding format mismatches with the video recorder.
Network Video Recorder User Manual
153
Soluon
If the camera is using H.265/MJPEG for encoding, but video recorder does not support H.265/
MJPEG, change the camera encoding format to the same as video recorder.
14.4.3 Why is the video recorder nofying risky password aer a network camera
is added?
Reason
The camera password is too weak.
Soluon
Change the camera password.
Warning
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case leers, lower case
leers, numbers, and special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, reseng the
password monthly or weekly can beer protect your product.
14.4.4 How to improve the playback image quality?
Reason
Recording parameter sengs are inappropriate.
Soluon
Go to Camera → Video Parameters . Increase resoluon and max. bitrate, and try again.
14.4.5 How to conrm the video recorder is using H.265 to record video?
Soluon
Check if the encoding type at live view toolbar is H.265.
14.4.6 Why is the meline at playback not constant?
Network Video Recorder User Manual
154
Reason
1. When the video recorder is using event recording, it only records video when event occurs.
Hence the video may not be connuous.
2. Excepon occurs, such as the device oine, HDD error, record excepon, network camera
oine, etc.
Soluon
1. Ensure the recording type is connuous recording.
2. Go to Maintenance → Log Informaon . Search the log le during the video me period. See if
there are unexpected events, such as HDD error, record excepon, etc.
14.4.7 Why is the video recorder nofying the network is unreachable when a
network camera is being added?
Reason
1. The IP address or port of network camera is incorrect.
2. The network between video recorder and camera is disconnected.
Soluon
1. Go to Camera → Camera → IP Camera . Click of the selected camera, and edit its IP address
and port. Ensure the video recorder and camera is using the same port.
2. Go to Maintenance → Network → Detecon . Enter the IP address of network camera in
Desnaon Address, and click Test to see if the network is reachable.
14.4.8 Why is the IP address of network camera being changed automacally?
Reason
When network camera and video recorder are using the same switch but in dierent subnets, the
video recorder will change the IP address of network camera to the same subnet as itself.
Soluon
When adding camera, click Custom Add to add camera.
14.4.9 Why is the video recorder nofying IP conict?
Reason
The video recorder uses the same IP address as other devices.
Network Video Recorder User Manual
155
Soluon
Change the IP address of video recorder. Ensure it is not the same as other devices.
14.4.10 Why is image geng stuck when playing back by single or mul-channel
cameras?
Reason
HDD read/write excepon.
Soluon
Export the video, and play it with other devices. If it plays normally on other device, change your
HDD, and try again.
14.4.11 Why does my video recorder make a beeping sound aer boong?
Reason
1. The front panel is not fastened (for the device which its front panel is removable).
2. HDD error, or do not have HDD.
Soluon
1. If it makes connuous beeps, and your device's front panel is removable, ensure the front panel
is fastened.
2. If it makes non-connuous beeps (3 long, 2 short), take HDD error as an example, check if the
device has installed HDD. If not, you can go to System → Event → Normal Event → Excepon ,
and uncheck Event Hint Conguraon to disable HDD error event hint.
Check if the HDD is inialized. If not, go to Storage > Storage Device to inialize the HDD.
Check if the HDD is broken. You can change it, and try again.
14.4.12 Why is there no recorded video aer the moon detecon is set?
Reason
1. The recording schedule is incorrect.
2. The moon detecon event seng is incorrect.
3. HDD excepon.
Network Video Recorder User Manual
156
Soluon
1. The recording schedule is setup correctly by following the steps listed in Conguring Record/
Capture Schedule.
2. The moon detecon area is congured correctly. The channels are being triggered for moon
detecon (See Conguring Moon Detecon).
3. Check if the device has installed HDD.
Check if the HDD is inialized. If not, go to Storage > Storage Device to inialize the HDD.
Check if the HDD is broken. You can change it, and try again.
14.4.13 Why is the video sound quality not good?
Reason
1. The audio input device does not have a good eect in sound collecon.
2. Interference in transmission.
3. The audio parameter is not properly set.
Soluon
1. Check if the audio input device is working properly. You can change another audio input device,
and try again.
2. Check the audio transmission line. Ensure all lines are well connected or welded, and there is no
electromagnec interference.
3. Adjust the audio volume according to the environment and audio input device.
Network Video Recorder User Manual
157
UD23818B
