Loading ...
Loading ...
Loading ...
1. Optionally connect the audio out (green), audio in (pink), digital output
(brown), digital input (yellow), and GND.
2. Optionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the
TV Out field on the Web
interface. See 4.1.1 Video Settings, GV-IPCam Firmware Manual.
3. Supply the camera with power and network access using one of the
following methods:
• Use a GV-PA482 Power over Ethernet adapter to connect the
camera to power and network as illustrated below. GV-PA482
• PoE adapter is an optional accessory. For detail, see Options in the
manual.
DC 48V Power Adaptor
Power
Hub/Router
Ethernet Cable
Rear Panel
PoE
Figure 2-16
38
Loading ...
Loading ...
Loading ...