2 3
Hardware inside
8 9
Care and Maintenance
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warp-
ing, shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture
as it ages.
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to
the finish.
Liquid spills should be removed immediately. Using a soft clean
cloth, blot the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
FLOOR AREA
2MX1.5M
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
3-Drawer Storage Cabinet
HW61419BK
HW61419WH
ASSEMBLED BY 1 ADULT
7
PRODUCT ASSEMBLY
5
PRODUCT ASSEMBLYPRODUCT ASSEMBLY
6
STEP 3
STEP 1
STEP 4
STEP 2
PRODUCT ASSEMBLY
4
1
1pc
4
4pcs
5
8pcs
7
1pc
8
3pcs
9
3pcs
10
3pcs
3
1pc
6
4pcs
7
1pc
5
8pcs
6
4pcs
7
1pc
8
3pcs
9
3pcs
10
3pcs
2
1pc
3
1pc
4
4pcs
Assemble Instruction
m6x28mm m6x20mm
Attention : Do not tighten the screws until
you have completed assembly
8
8
8
8
9
m6x28mm
m6x20mm
5
5
5
5
5
5
5
5
1
4
4
2
4
4
3
6
6
6
3
10
Before You Start
Read each step carefully before starting. It is very important to ensure each step followed in
correct order, otherwise assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all
parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will be used.
Keep the handtools close at hand. Do not use power tools to assemble your furniture.
They may scratch or damage the parts.
