Loading ...
Loading ...
Loading ...
PRE-OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
ATTENTION：
Please read all important instructions before using your soda machine.
1. Make sure the unit is in the OFF position before plugging the machine into the outlet.
2. Place machine on a level surface.
3. Check whether the power cord and the appearance of the product are intact.
CARBONATOR
1. All the carbonator pass 2MPa pressure test.
2. We have a safety valve on the carbonator, once the pressure is higher than 1.1-1.5
MPa, it will automatically open and release the pressure.
3. Cleaning of the carbonator: Clean before use; clean when no operation of the soda
water for a long time ( more than one week)
1. When the product is not used for a long time, please turn off the switch and pull out the
power plug.
2. Before cleaning and maintenance, turn off the machine and unplug the power cord.
3. When cleaning, use a soft cloth dipped in a small amount of water or kitchen detergent
to gently wipe the surface of the product.
4. It is strictly forbidden to clean with alcohol, gasoline, banana oil or toluene to prevent
the shell from turning yellow or corroding.
THE NOISE OF MACHINE
The machine runs 40-50dB during normal operation.
OPERATING INSTRUCTIONS
POWER
Step 1：
Plug the power cord into the outlet.
Step 2：
Turn on the power switch at the bottom right corner of the back of the product, the buzzer
will emit a beep, the function button lights will light up, and the product will stand by.
MODES
ICE WATER：
Click the button to prepare ice water at 3-5°C, click again to stop.
SODA WATER：
Click the button to prepare soda water at 3-5°C, click again to stop.
ROOM TEMPERATURE WATER：
Click the button to prepare room temerature water, click again to stop.
- 20 - - 21 -
Loading ...
Loading ...
Loading ...