Loading ...
Loading ...
Loading ...
1. Disassemble the blue safety clip, press down the inlet, and then pull out the plug.
3. Connect 5/16 CO2 hose to the machine,than install the blue safety clip.
4. Turn the valve is on OFF position (Perpendicular to the hose), than assemble the CO2
regulator to the CO2 cylinder.
2. Take the 5/16 gas hose, cut as needed and assemble 5/16 manual valve (to control
the CO2 in and off). Assemble the hose to the CO2 Regulator.（CO2 Regulator is not
included).
- 14 - - 15 -
INSTALLATION OF THE MACHINE
5. Turn the pressure to 75±5psi.
Loading ...
Loading ...
Loading ...