Loading ...
Loading ...
Loading ...
PRECAUTIONS BEFORE INSTALLATION
- 12 - - 13 -
CORRECT OPERATION
When using the appliance for the first time or using it continuously, please follow
below rules!
1. Use an independent water source for the soda dispenser, and check regularly to
prevent low water, fluctuations, or blocked filters.
2. The soda maker should be kept away from heat sources, strictly forbidden to use it in
high or low temperature environment. Away from direct sunlight to avoid affecting the heat
dissipation of the appliance.
3. Do not wash the soda maker surfaces with water directly, which may cause short circuit
and leakage.
INSTALLATION LOCATION
Transporting and moving conditions:
When transporting, keep the tank as upright as possible, and the inclination does not
exceed 45 °maximum. Do not locate it upside down or horizontally. To operate the soda
dispenser properly and get the best performance, please locate the soda dispenser as
the following conditions mentioned.
PRE-OPERATING INSTRUCTIONS
BASE INSTALLATION:
1. Place the Soda machine in a firm and level position.
2. The Soda maker is not suitable for outdoor use. The normal use environment
temperature is 59℉- 86℉, and the water temperature is 50℉- 89℉. High temperature
will seriously decrease the ice making performance.
3. Soda Maker rely on air circulation to dissipate heat. Therefore, it need at least 6 in of
space between the front, back, left, and right of your Soda Machine and wall, good for
heat dissipation.
4. Assemble the drip tray.
Avoid sun and rain Good ventilation Placement should be stable
Operation of the Soda machine
In order to assure proper working CONDTIONS of the Soda machine, end customer need
to assure that ROOM temperature as the WATER INLET temperature will be between 59-
86 °F. Celsius. Any other temperatures not according the instructions
can damage
the machine
Loading ...
Loading ...
Loading ...