Loading ...
Loading ...
Loading ...
TiS55+/TiS75+
Users Manual
46
If you remove the Imager from the charger before a full charge shows, it can have a
reduced run-time.
3. Disconnect the ac power adapter when the smart battery is fully charged.
Optional 12 V Vehicle Charger
W Caution
To prevent damage to the Imager, remove it from the dc car charger before you
start or jump start the vehicle.
To use the 12 V vehicle charger to charge the battery:
1. Connect the 12 V adapter into the 12 V accessory socket of the vehicle.
2. Connect the other end to the ac power socket of the Imager.
bz flashes on the display while the battery charges.
3. Charge until the charge indicator on the display does not flash.
4. Disconnect the 12 V adapter and Imager when battery is fully charged.
Radio Frequency Data
See Table 15 for instructions on how to access digital copies of the Certificate IDs on the
Imager.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com