Loading ...
Loading ...
Loading ...
Thermal Imager
Fluke Connect Menu
23
Assign a Different Asset ID Tag
To exit out of an asset ID and save images with a different asset ID:
3. Tap the asset ID that looks like on the display.
4. Tap D Scan New Asset ID.
5. Assign a new asset ID. See Asset Identification (Asset ID).
Fluke Connect Tools
Use the Imager to wirelessly connect to Fluke Connect-supported tools to:
• View the live measurement of each tool.
• Capture the measurement of each tool in .is2 and .is3 images.
To discover a Fluke Connect-supported tool:
1. Turn on each wireless tool and make sure the wireless feature is enabled. See the
documentation of each tool for more information about how to use the tool.
2. Turn on the Imager.
3. Select f > Pair to Fluke Connect Tools.
4. Select On.
The Imager starts to scan and presents a list with the ID and name of available tools
found within 20 m without obstructions (open air) or within 6.5 m with obstructions
(sheetrock wall). You can expect a short delay before the scan is complete.
The Fluke Connect button on each wireless tool will flash.
5. On the Imager, select the tool name.
6. For each tool, tap the tool or push s to select the tool.
The Imager shows the tool in the My Tools list as connected. The tool shows with the
current reading.
The Fluke Tool shows an ID (Identification) number for reference to the list on the
Imager.
7. Push s to return to the Camera mode.
The readings from the tool show on the display. Tap the tool readings on the Imager to
return to the Pair Fluke Connect Tools menu.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...