Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
39
Figure 6-10 Tracking Tab Page
3. Set the tracking mode to Auto-Track the Target Continuously or Auto-Track the
Target by Schedule:
Auto-Track the Target Continuously: the speed dome tracks the target
continuously.
Auto-Track the Target by Schedule: the speed dome tracks the target by
schedule. Drag the time bar to set the tracking duration [Range: 0 to 60s].
If the duration is set to be 0, it works the same way as Auto-Track the Target
Continuously.
4. Set the self-adaptive ratio coefficient [Range: 0 to 60]. The recommended
coefficient value is 7.
Set the self-adaptive ratio coefficient according to the target size.
When the self-adaptive ratio coefficient value is not 0, the zoom ratio does not make
effect. The ratio of the speed dome changes with the target size.
Set the self-adaptive ratio coefficient value larger if you want to view less details of
the target. Set the self-adaptive ratio coefficient value smaller if you want to view
more details.
5. Move and zoom the speed dome to a scene, and then click the Set Initial Position
to set the initial position of speed dome. The speed dome moves to the initial
position after completing the tracking task.
6. Click Save to save the settings.
6.5 VCA Rule Configuration
Purpose:
Set the VCA rules of the Smart Linkage tracking, and then the speed dome perform
the tracking of target according to the rule.
Loading ...
Loading ...
Loading ...