Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
14
2) Tighten the screws between the speed dome and the head cover with the Allen
wrench to secure the speed dome onto the bracket.
Figure 3-16 Fix the Speed Dome with Head Cover
5. Install the junction box.
1) Unscrew the screw of top cover with the cross screwdriver, then open the
cover.
Top
Cover
Figure 3-17 Open the Top Cover of Junction Box
2) Route the cables through the bottom hole of junction box.
3) Fix the junction box onto the bracket with three M6×14 screws.
Figure 3-18 Junction Box Installation
6. Route the cables of bullet camera through the left hole of junction box.
7. Fix the bullet camera with four M5 screws.
Loading ...
Loading ...
Loading ...