Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
12
3) Adjust the fixing plate to the right position and then tighten the loop rings to
secure the fixing plates.
Figure 3-10 Adjust Fixing Plate Position
3.3 Smart Linkage Tracking System Installation
3.3.1 Install Device with Wall Mount Bracket
Steps:
1. Remove the protective sticker.
Figure 3-11 Remove Protective Sticker
2. Install the speed dome head cover.
1) Loosen the two lock screws with the Allen wrench. Make sure the screws do
not appear in bracket inner side.
Lock Screw
Head Cover
Figure 3-12 Loosen the lock screws
2) Install the head cover to the bottom of the bracket.
3) Fix the head cover with the bracket according to the figure below.
Loading ...
Loading ...
Loading ...