PowerSmart DB2701 40V 1100 PSI 1GPM Cordless Pressure Washer with 5 Nozzles, 4.0 Ah Battery &

User Manual - Page 13

For DB2701.

PDF File Manual, 48 pages, Read Online | Download pdf file

DB2701 photo
Loading ...
Loading ...
Loading ...
13
TROUBLE SHOOTING
WARNING: Read instruction manual first! Remove battery pack before making adjustments
or assembling accessories.
Symptom
Possible causes
Solution
Machine turns on but it
does not draw any
water or there is not
sufficient pressure.
Hose filter is blocked.
Take out the hose filter and rinse the parts
with clean water.
The users garden hose is not
well connected to the
machine.
Check and reattach the garden hose
tightly.
Hose adapter looses.
Tighten the hose adapter securely with a
spanner.
The filter screen is
missing.
Contact POWERSMART service to
get a filter screen.
The filter screen is
blocked.
Clean the filter screen regularly.
Pump, hose, or other
parts are frozen due to
outside temperatures.
Wait for the pump, hose or other parts to
thaw.
Hose kinks.
Straighten out the hose.
Multi-spray
nozzle leaks.
The nozzle pattern does not
spray correctly.
Make sure the nozzle pattern symbol
aligns with the indicator mark on tool.
Outlet pressure
increases suddenly.
Multi-spray nozzle is
blocked.
Replace with a new multi-spray nozzle.
Machine drains out
water after
stopping.
There is water remaining in
the lance and pump after
stopping.
Drain all the water completely before
storage.
Soap accessory
cannot spray out
any detergent.
Blockage in the soap bottle.
Clean it with fresh water.
Machine does
not start.
The battery pack is not
attached well.
Reinstall the battery pack.
Battery pack is empty.
Replace with a new battery pack or
recharge the battery pack.
Defective battery.
Replace with a new battery pack.
Machine pressure
is not consistent.
Additional air could be
sucked into the machine.
Check connection between the hose
adapter and the draw hose.
Machine stops
automatically.
Battery pack is empty.
Replace with a new battery pack or
recharge the battery pack.
The multi-spray nozzle is
blocked. The current
protection is activated.
Remove the multi-spray nozzle and
turn on the machine. If the machine
works normally, replace with a new
multi-spray nozzle.
Loading ...
Loading ...
Loading ...