Artusi ADW5002X1 60cm Dishwasher Stainless Steel

User Manual - Page 26

For ADW5002X1.

PDF File Manual, 32 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
8 CLEANING AND
MAINTENANCE
Cleaning your dishwasher is important to
maintain the machine’s service life
Make sure that the water softening setting
(If available) is done correctly and correct
amount of detergent is used to prevent
limescale accumulation. Rell the salt
compartment when the salt sensor light
comes on.Oil and limescale may build up in
your Dishwasher over time. If this occurs:
Fill the detergent compartment
but do not load any dishes. Select
a programme which runs at high
temperature and run the Dishwasher
empty. If this does not clean your
Dishwasher sufficiently, use a
cleaning agent designed for use with
dishwashers.
To extend the life of your dishwasher,
clean the appliance regularly on each
month
Wipe the door seals regularly with a
damp cloth to remove any accumulated
residue or foreign objects.
8.1 Filters
Clean the lters and spray arms at least
once a week. If any food waste remains
or foreign objects on the coarse and
ne lters, remove them and clean them
thoroughly with water.
a) Micro Filter b)
Coarse Filter
c) Metal Filter
3 4
1 2
a
c
b
To remove and clean the lter combination,
turn it counter clockwise and remove it by
lifting it upwards (1).Pull the coarse lter out
of the micro lter (2).Then pull and remove
the metal lter (3).Rinse the lter with lots of
water until it is free of residue. Reassemble
the lters. Replace the lter insert, and
rotate it clockwise (4).
Never use your dishwasher without a
filter.
Incorrect fitting of the filter will reduce
the washing effectiveness.
Clean filters are necessary for proper
running of the machine.
8.2 Spray Arms
Make sure that the spray holes are not
clogged and that no food waste or foreign
object is stuck to the spray arms. If there is
any clogging,remove the spray arms and
clean them under water. To remove the
upper spray arm undo the nut holding it in
position by turning it clockwise and pulling
it downwards. Make sure that the nut is
properly tightened when retting the upper
spray arm.
EN - 26
Loading ...
Loading ...
Loading ...