Artusi ADW5002X1 60cm Dishwasher Stainless Steel

User Manual - Page 14

For ADW5002X1.

PDF File Manual, 32 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
EN - 14
4 BEFORE USING THE
APPLIANCE
4.1 Preparing Your Dishwasher For First
Use
Make sure the electricity and supply
water specications match the values
indicated in the installation instructions
for the machine.
Remove all packaging material inside the
machine.
Set the water softener level.
Fill the rinse aid compartment..
4.2 Salt Usage (IF AVAILABLE)
For a good washing function, the
dishwasher needs soft, i.e. less calcareous
water. Otherwise, White lime residues
will remain on the dishes and the interior
equipment. This will negatively a󰀨ect your
machine’s washing, drying and shining
performance. When water ows through
the softener system, the ions forming the
hardness are removed from the water and
the water reaches the softness required to
obtain the best washing result. Depending
on the level of hardness of the inowing
water, these ions that harden the water
accumulate rapidly inside the softener
system. Therefore, the softener system
has to be refreshed so that it operates with
the same performance also during the next
wash. For this purpose, dishwasher salt is
used.
Machine can only be used by special
dishwasher salt to soften the water. Do not
use any small grained or powdered type
of salts which can easily soluble. Using
any other type of salt can damage your
machine.
4.3 Fill The Salt (IF AVAILABLE)
To add softener salt, open the salt
compartment cap by turning it counter
clockwise. (1) (2) At rst use, ll the
compartment with 1 kg salt and water (3)
until it is almost overowing. If available,
using a funnel (4) will make lling easier.
Replace the cap and close it. After every
20-30 Cycles add salt into your machine
until it lls up (approx. 1 kg).
3 4
1 2
SALT
Only add water to the salt compartment
on rst use.
Use softener salt specically produced for
use in dishwashers.
When you start your dishwasher, the salt
compartment is lled with water, therefore
put the softener salt in prior to starting your
machine.
If the softener salt has overowed and you
do not start the machine immediately, run
a short washing program to protect your
machine against corrosion.
Loading ...
Loading ...
Loading ...