Loading ...
Loading ...
Loading ...
Setup
Set Auto Power Off Time 2
2-5
Warning
To prevent possible electrical shock, fire, or personal injury, do
not use the HOLD function to measure unknown potentials.
When HOLD is turned on, the display does not change when a
different potential is measured.
To set AutoHold and AutoSave mode:
1. Push to open the Setup menu.
2. Use L and to highlight Auto mode.
3. Push the Select softkey to open the Auto mode menu.
4. Use L and to highlight Disable, HOLD, or HOLD+SAVE.
5. Push the Confirm softkey.
6. Push the Back softkey to return to normal operation.
Set Auto Power Off Time
Use the Auto Power Off Time function to save power. The options are, enable or disable
auto power off and set the time between the last operation and auto power off.
To set the time for auto-power off:
1. Push to open the Setup menu.
2. Use L and to highlight General and push the Select softkey.
3. Use L and to highlight Power off, and push the Select softkey.
4. Use L and to highlight 5 Minutes, 15 Minutes, 30 Minutes, or Never.
5. Push the Confirm softkey.
6. Push the Back softkey to return to the Setup screen.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...