Loading ...
Loading ...
Loading ...
26
|
CARE & USE/INSTALLATION
BEFORE EACH USE
Before any use, always make sure that:
• ... you do not smell gas before you light the grill. If you
do smell gas, shut everything off and have a qualified
plumber check for leaks.
• … the cooking area is free and clear of any combustibles,
besides your food, that might ignite.
• … the control knobs turn freely.
• … if you are using a portable propane cylinder, it is
securely connected and leak tested. (See INDEX: “LP
Cylinder Requirements” for details.)
• … you know where the main gas supply shut-off is
located.
• … the burners are seated properly in the grill. The main
burners must sit level and firmly on the burner mounting
support frame. (See INDEX: “Unpacking & Assembly” for
further details.)
• … wind is not blowing too strongly or blowing on the
back of grill.
LIGHTING YOUR GRILL
1. Never attempt to light a burner if you smell gas.
2. Always keep the lid open when lighting your grill.
3. Releasing fuel into a closed grill before lighting will increase the risk of explosion, property damage, personal
injury or death.
4. Keep your face and body as far from the grill as possible when lighting. Any time a burner doesn’t light within
5 seconds, turn off the control, wait 5 minutes for gas to dissipate, and repeat the lighting procedure.
5. YOU NEVER LEAVE THE GRILL UNATTENDED WHILE THE GRILL IS LIT.
WARNING
PRE-GRILL CHECKLIST ...continued
ELECTRIC IGNITION
Before proceeding, make sure you have completed the
“Before Each Use” checklist.
Follow these steps to light any of the burners on your grill:
First, make sure all burner control knobs are set to OFF.
Depress the front panel switch. The lights will come on and
the FlameTrak will be enabled.
For the Trident™ Burner:
Push and turn the control knob to the “LITE/MAX”
position, allowing the igniter to spark and the gas to flow.
The blue indicator light wil flash and remain lit once the
burner ignites. You can then set the knob to the desired
heat setting.
For the Rotisserie Burner:
Push and turn the control knob to the “LITE/HI”
position, allowing the igniter to spark and the gas to flow.
The blue indicator light wil flash and remain lit one the
burner ignites.
The grill features a flame sensor with a safety valve that
automatically shuts off the flow of gas if the burner goes
out for any reason.
Loading ...
Loading ...
Loading ...