Loading ...
Loading ...
Loading ...
Linkage Method Descripon
Alarm Output The alarm output can be triggered by the alarm input, moon
detecon, video tampering detecon, face detecon, line crossing
detecon, and any all other events.
Record When an alarm is detected, the selected channel would record
videos.
Note
Video recording schedule shall be enabled for the channel,
otherwise this linkage would be invalid. You can go to System →
Storage Management → Storage Schedule → Video Recording to
congure video recording schedule.
8. Click Save.
13.1.5 Thermal Camera Detecon
The NVR supports the event detecon modes of the thermal network cameras: re and smoke
detecon, temperature detecon, temperature dierence detecon, etc.
Before You Start
Add the thermal network camera to your device and make sure the camera is acvated.
Steps
1. Go to Event Center → → Event Conguraon → Thermal Event .
2. Select a camera.
3. Select an event type.
4. Turn on Enable.
5. Click Rule Sengs to set the rule.
Table 13-10 Thermal Events
Event Name Event Descripon
Fire Detecon An alarm would be triggered when re is detected in the
arming area.
Temperature Detecon An alarm would be triggered when the temperature exceeds
the threshold value.
6. Click Arming Schedule to select an arming schedule type.
Note
If you set Arming Schedule as Custom, you can drag the cursor on me bar to set customized
arming schedule, or move the cursor on me bar and click to set specied me
schedule.
Network Video Recorder User Manual
70
Loading ...
Loading ...
Loading ...