Loading ...
Loading ...
Loading ...
Figure 4-7 ISUP
2. Turn on Enable.
Note
If ISUP is enabled, the Hik-Connect access will automacally be disabled.
3. Set the related parameters.
Server Address
The plaorm server IP address.
Access Server Port
The plaorm server port, ranges from 1024 to 65535. The actual port shall be provided by
the plaorm.
Device ID
Device ID shall be provided by the plaorm.
Protocol Version
ISUP protocol version, only ISUP 5.0 is available.
Encrypon Key
Encrypon password is required when using ISUP V5.0 version, it provides more secure
communicaon between the device and plaorm. Enter it for vericaon aer the device is
registered to the ISUP plaorm. It cannot be empty, or "ABCDEF".
4. Click Save.
You can see the registraon status (online or oine) aer the device is restarted.
4.2.4 Congure SDK Service
SDK (Soware Development Kit) service is used for third-party partners to integrate dierent
funcons. The enhanced SDK service adopts TLS protocol over the SDK service that provides safer
data transmission.
Steps
1. Go to System → System Sengs → Network → Plaorm Access → SDK.
Network Video Recorder User Manual
12
Loading ...
Loading ...
Loading ...