Loading ...
Loading ...
Loading ...
22
IMPORTANT
When removing or replacing the ice bin,
ensure that the ice bin is fully seated
before closing the freezer door. If the
ice bin is not positioned correctly the
refrigerator will not dispense ice. The
freezer door also may not close properly
causing warm air to leak into the freezer
compartment.
Cleaning the ice maker
Clean the ice maker and ice bin at regular
intervals, especially prior to vacation or
moving.
1 Turn off the ice maker.
2 Remove the ice bin.
3 Empty and carefully clean the ice bin
with mild detergent. Do not use harsh
or abrasive cleaners. Rinse with clean
water.
4 Allow the ice bin to dry completely
before replacing in the freezer.
5 Replace the ice bin. Turn the ice
maker on.
Remove and empty the ice bin if an
extended power failure (one hour or longer)
causes ice cubes in the ice bin to melt and
refreeze together after power is restored.
Remove the ice bin and shake to loosen
the cubes or clean as explained above.
Ice maker tips
• The following sounds are normal when
the ice maker is operating:
Motor running
Ice dropping into ice bin
Water valve opening or closing
Running water
• Ice cubes stored too long may develop an
odd flavor. Empty the ice bin as explained
below.
FREEZE BOOST Function
Your refrigerator is equipped with a
FREEZE BOOST Function for freezing food
at a faster rate, but it can also increase
ice production. This function terminates
automatically after 12 hours. This
function affects only the ice maker in
the freezer.
CAUTION
If the water supply to your refrigerator
is softened, be sure the softener is
properly maintained. Chemicals from
a water softener can damage the ice
maker.
CAUTION
NEVER use an ice pick or similar sharp
instrument to break up the ice. This
could damage the ice bin.
To loosen stuck ice, use warm water.
Before replacing the ice bin, make sure
it is completely dry.
Automatic Ice and Water Dispenser
Loading ...
Loading ...
Loading ...