Loading ...
Loading ...
Loading ...
14
Connecting Water Supply
6 ft. (1.8 Meters)
Stainless Steel water
line from household
water supply line
Water
Inlet
Fitting
Plastic
tubing
to
water
valve
Connection to
household
water supply
To Connect Water Tube to
Household Water Supply
1 Disconnect
refrigerator
from electrical
power source.
2 Place end of
water supply
line into sink
or bucket.
Turn ON water
supply and
flush supply
line until water
is clear. Turn
OFF water
supply at
shutoff valve.
To
Household
Water
Supply
To
Unit
Water
Valve
Place wrench
here. Do not turn.
Place wrench
here. Turn
clockwise.
6 Turn ON water supply at shutoff valve
and tighten any connections that
leak.
7 Reconnect refrigerator to electrical
power source.
8 Ensure ice maker is turned ON.
9 Purge air from Ice & Water Dispenser
System by operating the water
dispenser for 3-4 minutes. This will
require dispensing several glasses of
water.
IMPORTANT
The refrigerator’s water supply system
includes several tubing lines, a water filter,
and a water valve. To ensure that the water
dispenser works properly, this system
must be completely filled with water when
the refrigerator is first connected to the
household water supply line.
3 Remove plastic cap
from water inlet fitting
and discard cap.
4 If using (recommended)
stainless steel
braided tubing - the
nut and ferrule are
already assembled
on the tubing. Slide
compression nut onto
water inlet fitting and finger tighten.
5 Using two adjustable wrenches (one
to hold the household water line nut
and the other to hold the water inlet
fitting nut), tighten a half turn with
wrench. DO NOT over tighten.
Loading ...
Loading ...
Loading ...