Loading ...
Loading ...
Loading ...
10
Installation
Lower Hinge Removal
Once both doors are in place, ensure
they are aligned with each other and level
(Reference the Installation section for more
details), and replace the top hinge cover.
8 To reinstall doors, reverse procedure.
7 To gain access to lower hinge,
drawer will need to be extended.
Unscrew the three lower hinge
screws and slide the hinge inwards.
To remove the TempAdapt Drawer
1 Fully open
drawer.
2 Remove
basket
from
drawer.
3 Unsnap
the 4
cable ties by pressing clip sides
together and pushing through
opening.
4 Remove screw and retaining clip and
disconnect the harness.
5 Remove drawer by pressing on the
liner clips and slide rail past clips on
both sides to fully remove drawer
from cabinet.
Press the two
tabs on both
sides to release
the sliders
Cable
Tie
Cable
Clip
NOTE: Do Not Remove or Cut
Cable Ties From Wire Harness
(4) Cable
Ties
Retaining
Clip
Retaining Clip
To Cabinet
Harness
Screw
NOTE
When reinserting the water tube and
replacing the top hinge cover, use care
to be sure the tube does not kink.
IMPORTANT
Make sure water line tubing goes
through hole at top of dispenser pocket.
There is also a metal wrap on the tubing
to prevent damage from the hinge
rubbing against it. This needs to be
fixed back around the tube in the proper
location upon reinstallation (just as long
as the tube is protected from the hinge).
Loading ...
Loading ...
Loading ...