Loading ...
Loading ...
Loading ...
9
Top 10 / S400 | User Instructions
6.4 LED Lights
Connectivity LEDs
The connectivity LED light on the power supply has several modes:
1. Flashing
blue light - waiting for Bluetooth® connection.
2. Steady blue light - connected via Bluetooth®.
3. Flashing green light - power supply is trying to connect to your home/pool Wi-Fi® network and
cloud, or a weak internet signal.
4. Steady
green light - power supply is now connected to the Wi-Fi® network and to the cloud.
5. Alternating blue and green light - power supply is connected via Bluetooth® and trying to connect
to your home/pool Wi-Fi® network & cloud.
On/Off LEDs
1. Steady
blue light - The pool cleaner is ON.
2. Flashing green light - waiting for the next operation (delay mode or weekly timer).
3. Alternate blue/green/red lights – program updating remotely.
Please wait until process is completed.
4. Steady red light – fault. Refer to troubleshooting.
Tips
• If the app is stuck on the same screen for over 2 minutes, close the app and re-open it.
• To test your Wi-Fi® signal strength and quality, play a video via your smart device browser.
7. OFF SEASON STORAGE
If the Pool Cleaner will not be in use for an extended period, perform the following storage steps:
1. Make sure that no water is left in the Pool Cleaner.
2. Thoroughly clean the filter basket and insert them in place.
3. Roll up the cable so that it has no kinks and place on the Caddy.
4. Store the pool cleaner upright on the Caddy in a protected area out of direct sun/rain/frost at a
temperature of between 5˚-45˚C / 41˚-113˚F.
Loading ...
Loading ...
Loading ...