Description of control
1.Alarm icon
2.Symbol Radio Control RCC
3.Time display
4.Display low battery indicator
5.Snooze icon
6.Weekday display
7.Calendar display
8.Outdoor temperature
9.Outdoor sensor signal strength
10.Tendency outdoor temperature
11.Moon phase
12.Indoor temperature
13.In/Outdoor temperature max/min record
14.Sensor low battery indicator
15.Tendency indoor temperature
16.LIGHT/SNOOZE button
17. CH button
18. DOWN/MEM button
19. UP /RCC/ 12/24 button
20. MODE /ALARM button
21. Battery Compartment 3xAAA (batteries not included)
22. Stand bracket
23. Wireless signal indicator (Flashes when data is being sent to the
display unit)
24. Integrated hang hole
25. Compartment 2xAAA batteries (batteries not included)
Package Contents:
1. Display Unit
2. Outdoor Sensor
3. Instructions Manual
Installing or Replacing Batteries:
•We recommend using high quality alkaline batteries for the best product
performance.
•Heavy duty or rechargeable batteries are not recommended.
•The outdoor sensor requires high quality alkaline batteries in low
temperature conditions. Cold
temperatures could cause other batteries to function improperly.
•Do not mix old and new batteries. Do not mix alkaline, standard, and/or
rechargeable batteries.
Default settings
3. Default week: SUN
4. Default temperature: °F
5. Default alarm:AM 6:00,default snooze time: 5min.
Display / Keys Details:
There are totally 5 keys for the alarm clock,they are included:
MODE/ALARM, UP/12/24, DOWN/MEM, CH, LIGHT/SNOOZE.
1. MODE/ALARM buttons:
a. Press and hold for 3 seconds during normal mode to enter setting
mode.
b. Press MODE/ALARM button during normal mode to enter alarm mode.
2.UP/RCC/12/24 buttons
a.In normal display mode, press this button to switch 12/24 hour.
b.Press and hold for 3 seconds to turn on or turn off RCC.
c.In alarm mode,press this button to open and close alarm.
d. Press to increase the setting value during setting.
e. Press and hold 3 seconds button for fast adjust during setting mode.
3.DOWN/MEM buttons:
a.Press the button to display max/min temperature.
b.Press and hold the button 3 seconds to clear the record of MAX/MIN
temperature.
c.Press the button to display tendency in/outdoor temperature icon.
d. Press to increase the setting value during setting.
e. Press and hold 3 seconds button for fast adjust during
setting mode.
4.CH buttons:
a. In normal display mode, press and hold to search RF.
5. LIGHT/SNOOZE buttons:
a.In alarm mode,press the button to open snooze mode.
b.In normal mode, press this button to turn on/off the backlight.
Manually Setting the Time, Date & Units:
1.Press and hold down the "MODE" button for 3 seconds the hour display starts
to flash, use “UP” or “DOWN” buttons to set the correct hour.
2.Press "MODE" button to confirm your setting, the minute display starts to
flash, use “UP” or “DOWN” buttons to set the correct minute.
3.Press "MODE" button to confirm your setting, the year display starts to flash,
use “UP” or “DOWN” buttons to set the correct year.
4.Press "MODE" button to confirm your setting, the month display starts to flash,
use “UP” or “DOWN” buttons to set the correct month.
5.Press "MODE" button to confirm your setting, the date display starts to flash,
use “UP” or “DOWN” buttons to set the correct date.
6.Press "MODE" button to confirm your setting,the DAYLIGHT SAVING TIME
display, use the “UP” or “DOWN”buttons to select turn on or off the DAYLIGHT
SAVING TIME.
7.Press "MODE" button to confirm your setting, the TIME ZONE display,use the
“UP” or “DOWN” buttons to select the TIME ZONE.The TIME ZONE order
is:EST AST HAST AKST PST MST CST.
8.Press "MODE" button to confirm your setting, the temperature Unit starts to
flash,use “UP” or “DOWN” buttons to set the correct temperature Unit.
9.Press "MODE" button to confirm your setting and to end the setting
procedures, enter the normal mode.
NOTE: You will automatically exit settings mode if no buttons are pressed for 30
seconds. Enter settings mode again at any time by pressing and holding the
MODE button for 3 seconds.
Setting the Alarm:
1.In normal display mode, press ALARM button enter alarm mode.Use
“UP” button to open and close alarm.
2.Under the alarm mode,Press and hold the ALARM button,the hour
display starts to flash, use “UP” or “DOWN” buttons (press and hold to fast
adjust) to set the correct hour.
3.Press and hold the ALARM button,the minute display starts to flash, use
“UP” or “DOWN” buttons (press and hold to fast adjust) to set the correct
minute. And press the ALARM button again to exit alarm settings.
4.To turn the alarm ON or OFF, press the ALARM button to enter alarm
mode, press the UP button to ON or OFF the alarm. The “ ” symbol
should show next to the clock display when alarm is set to ON. Press the
UP button again to turn off the alarm, when the alarm is set to OFF, the
“ ”symbol should not display.
5.When the alarm is in operation it will begin beeping with one short beep
and continue with many short beeps if the alarm
rings longer than 20 seconds. You can snooze the alarm for 5 minutes by
pressing the LIGHT/SNOOZE button.
Indoor / outdoor temperature
1.Indoor temperature -10°C – 70°C
2.Outdoor temperature-40°C – 70°C
Accuracy
1. Temperature accuracy: -40°C ~ -20°C: ± 4°C
-20°C ~ 0°C: ± 2°C
0°C ~ +50°C: ±1°C
GEEVON Digital Wall Clock with Thermometer
Item No.T208614C-1
User Manual
Thank you for purchasing T208614C-1 Digital Wall Clock.
Please take a moment to read this guide
and store it for future reference
1. Default time: 12:00 (Time form: 12H)
2. Default date: 01/01 (Year: 2017, date form: M/D)
Loading ...
Loading ...
Loading ...
