Loading ...
Loading ...
Loading ...
4.Advanced User Guidebook
57
The oscilloscope can store 100 waveforms, which can be displayed with the
current waveform at the same time. The stored waveform called out cannot be
adjusted.
In order to save the waveform of CH1, CH2 and Math into the address 1, the
operation steps should be followed:
1. Turn on CH1, CH2 and Math channels.
2. Click to call up the menu panel. Click the Save softkey on panel.
3. Saving: Select Type in the bottom menu, select Wave in the left menu.
4. Select Storage in the bottom menu, select Internal in the right menu.
5. Select Source in the bottom menu, check CH1, CH2, Math in the right
menu for Source.
6. Select Object & Show in the bottom menu, select Wave1 as object
address in the left menu.
7. Select Save in the bottom menu to save the waveform.
8. Recalling: Select Object & Show in the bottom menu, select Wave1 in
the left menu. In the right menu, select Show as ON, the waveform stored
in the address will be shown, the address number and relevant information
will be displayed at the top left of the screen.
In order to save the waveform of CH1 and CH2 into the USB storage as a BIN
file, the operation steps should be followed:
1. Turn on CH1 and CH2 channels.
2. Click to call up the menu panel. Click the Save softkey on panel.
3. Saving: Select Type in the bottom menu, select Wave in the left menu.
4. Select Storage in the bottom menu, select External in the right menu.
5. Select Type in the bottom menu, select BIN in the right menu as the
storage format.
6. Select Source in the bottom menu, check CH1, CH2 in the right menu for
Source.
7. Select Save in the bottom menu, an input keyboard used to edit the file
name will pop up. The default name is current system date and time.
Select the key in the keyboard to confirm.
8. Recalling: The BIN waveform file could be open by waveform analysis
software (on the supplied CD).
Tip:
Loading ...
Loading ...
Loading ...